Tankclean ECO

Designed for the removal of heavy mineral oils and greases, dopes, additives, lubricants, asphalt, distillation residues, coal tar, several synthetic resins, paraffines (e.g. slackwax), inert gas soot, vegetable,fish and animal oils and fats, fatty
Category

Powerful & Concentrated Emulsifying Cleaner, Classified Heavy-Duty Degreaser for Oil, Grease, and Sludge Removal. Tankclean ECO is concentrated formulation designed to break down and emulsify heavy oils, grease, carbon deposits, removal of coaltar, crude benzene, lube oils, Petroleum distillate, pyrolyze gas oil, bitumen & similar and petroleum-based sludge. It is especially effective in demanding environments such as marine vessels, refineries, engine rooms, and industrial plants.

Application

Common Recommended Dilution of Tank Clean ECO:

  • Heavy Deposits: Use undiluted or 1:1 with water

  • Light Cleaning: Dilute up to 1:10 depending on contamination level

 

RXSOL Tankclean Eco is designed for the removal of: heavy mineral oils and greases, dopes, additives, lubricants, asphalt, distillation residues, coal tar, several synthetic resins, paraffines (e.g. slackwax), inert gas soot, vegetable,fish  and animal oils and fats, fatty acid and greases, crude palm oil, styrene, palm fatty acids.

Dose

Directions of use
Cleaning of cargo and storage tanks by means of recirculation method.

Pre Wash :-
Before cleaning with RXSOL Tankclean ECO, it is necessary to prewash the tanks with hot or cold water, depending on the type of cargo.

Recirculation Method ::: Refer Below.

Direct Injection:-
Inject 0.1 to 0.2 litres of Tankclean ECO per every 100 litres of water into the washing system.Maintain cleaning temperatures between 10-60 °C (depending on type of cargo).Cleaning time 2 to 6 hours, followed by thorough rinsing with fresh hot water.

Technical specifications

Properties:
Specific gravity (at 20°C) : 1.05
Flash point (10%)            : Non Flammable
pH (10%)                         : 12.0 - 12.5
Colour                             : Clear
Odour                              : Citrus

 

Application Methods For Tank Clean ECO:

  • Spray

  • Brush

  • Soak

  • Circulation or high-pressure wash systems

Note
Description
Tank Cleaner Eco is “the strongest there is” water-based, non-caustic cleaning and degreasing agent. It is based on
the latest and most powerful biodegradable surface-active and emulsifying agents. It contains fatty alcohol ethoxylates metasilicates and complexing agents. It works well in hard, soft, ambient and hot water. It is ideal
for soot removing and cleaning of extremely dirty tanks after Mineral Oils/Petroleum Products. Note. All cleaning
chemicals have reduced effect with seawater.
Product benefits, Application & Features:
• Non-Flammable • Suitable in sea & fresh water
• Leaves no film in the cargo tanks • Biodegradable
• Easy to apply. Effective and economical in use • Contains no ethoxylated nonylphenol (NF)
Remarks / Precaution
During Tank Cleaning operation, Re-circulation method can be considered one of POPULAR METHOD. TIPS for uses of TANK CLEAN ECO.
 1. First of all remove and strip all residue manually from Tank bottom and wall, Then flush tanks with the copious amount of seawater if possible by using the high-pressure machine to remove remaining cargo to slop. (As per MARPOL 78/73)
 
 2. Then recirculate hot water inside the tanks at least for 2-10 hr, this will helps to remove oily-mud and residues in the coating/steel.
 
 3. Then again take fresh hot water inside the tank and use Tank Clean ECO 0.5 - 2 %. And continue recirculation 2-8 hr. And continuously try to maintain temperature of 60 - 65 Degree Centigrade. Hot recirculation will improve the cleaning result. Do not overheat, as this may burn the cargo. otherwise, The water is heated by means of the heating coils, cargo heat exchanger or Butterworth heater.The tanks are washed by means of a loading pump, after which the solution used is recycled to the mixing tank. One solution is most often used to wash 1 – 4 tanks.Tankclean ECO must be recirculated as a 0.2 – 0.5 % emulsion (dependent on the nature of the contamination). Allow this emulsion to circulate for 2 – 4 hours at the temperature of 10-60 °C (depending on the type of cargo).
 
 4. Again Flush entire tanks with a large amount of warm seawater (2-3 hr) to remove any residues of Chemicals.
 5. Flush tanks with freshwater to remove salts, mop and dry.


RXSOL TANK Clean ECO is added to a mixing tank containing sufficient quantity of water in order to obtain a good recirculation.
 
Packing sizes
20, 25, 50, 210 Ltrs packing. Non-caustic Biodegradable tank cleaner for cleaning of Mineral, Petroleium products, veg oil, animal oil, fats etc.
MSDS

Product Name RXSOL-20-2035-210
Product Type Tankclean ECO Emulsifying Cleaning Agent

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Stock Point ::: Mumbai, Kandla, Visakhapatnam - Gangavaram, Kolkata - Haldia, Chennai - Ennore, Fujairah, Muscat OMAN

Phone +91 22 27815541 / 42
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email mail@rxmarine.com

 IONIC – SURFACTANT , FATTY ALCOHOL, INGRIDENT NOT CLASSIFIED AS HAZARDOUS

Ingestion Harmful, if ingested.
Inhalation Inhalation does not produce any side effect .
Skin Contact Non Irritation
Eye Contact Cause Irritation
Environmental Hazards None
Human Health  Hazards Moderates

Ingestion Induce vomiting & seek medical attention
Inhalation Remove to fresh air
Eye Contact Flush with water for at least 15 minutes.

Extinguishing Media Non combustible product
Suitable Use extinguishing media like foam dry Co2 , water-spray.
Not suitable Not applicable
Special Not applicable
Protection of fire Fighter Not applicable

 - Bio-Degradable
 - Non- Hazardas

Handling None , Avoid contact with eye
Storage General Storage
Methods of cleaning Flush Spill Area with Water
NOTE Keep Container Tightly Closed

Respiratory System Protection Not  required
Eye Protection  

Properties

Appearance

Green liquid  / Clear ( Colour is only for product identification, Not playing any role in cleaning action )

Flash point (10%)  Non Flammable
pH (10%) 7
Colour     Clear
Odour                       Citrus

Compatibility    

 

Metal

No known effect

Rubber

No known effect   

Flash point

More Than 66

Solubility

100% soluble in water 

Packaging 

Size (in  210 Litres)

Condition to Avoid Heat, Flame & Other Sources of Ignition
Materials  to Avoid Do not subject to Acidic/Highly Alkaline/Oxidizing Agents.
Hazardous Decomposition Products Do not occur (Bio-Degradable) 

Skin Irritation No.
Eye Irritat Moderate
Sensitization Not Sensitizing
Chronic Toxicity Not Identified
Carcinogencity No.

 (All above information as per data available with us)

1)   Comment   Not applicable
2)   Ecotoxicity   Not applicable 

Disposal methods Small amounts may be flushed with water to sewer. Larger volumes must be sent to approved plant for destruction. Dilute with water, neutralise with HCl, discharge to sewer with plenty of water. Confirm disposal procedures with environmental engine and local regulations.Waste class Hazardous waste in accordance with EU directives. 06 02.

ROAD TRANSPORT (ADR)
  ADR class Not dangerous according to ADR
RAIL TRANSPORT (RID)
  RID class no. N/A
SEA TRANSPORT (IMDG)
  IMDG class N/A
AIR TRANSPORT (IATA/ICAO)
  IATA/ICAO class N/A

Symbol(s)

Contains C6 Alkylglucoside

Fatty alcohol ethoxylate

Tetrapotassium pyrophosphate

Disodium metasilicate

Potassium hydroxide

Risk phrases

R-41 Risk of serious damage to eye. R-38 Irritating to skin.

Safety phrases

S-26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S-36/37/39 Wear suitable protective clothing, gloves and eye/face protection. S-2 Keep out of reach of children.

Explanations of R-phrases in Section 2 R-22 Harmful if swallowed. R-34 Causes burns. R-35 Causes severe burns. R-37 Irritating to respiratory system. R-41 Risk of serious damage to eye.
* Information revised since previous SDS version
User notes: The information presented herein has been compiled from sources considered to be dependable and is accurate to the best of the sellers knowledge or has been generated to be the best of our ability without extensive research beyond our understanding or economic feasibility. Seller makes no warranty whatsoever, expressed, implied or of merchantability of the product, or of result obtained from this report. If data do not meet your needs, consult your supplier before using this product Seller assumes no resposibility for injury to buyer or third party or for any demage to any property. Buyer assumes all such risks.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Need a quote for this product?

Tell us the grade, packing and quantity you need — we ship across India and to major ports.

Request a quote office@kolkatachemical.com