All Purpose professional Stone and Tiles Cleaner
The product is intended to remove accumulated dirt, greasy deposits, footprints, atmospheric contamination, food stains and everyday surface impurities without unnecessarily affecting the original surface finish when properly formulated and applied.
Application & Uses
Applications
|
Surface |
Cleaning Application |
|---|---|
|
Marble |
Routine cleaning of polished floors and walls |
|
Granite |
Removal of dirt, grease and surface contamination |
|
Ceramic Tiles |
General floor and wall cleaning |
|
Vitrified Tiles |
Removal of footprints and accumulated dirt |
|
Porcelain Tiles |
Routine surface cleaning |
|
Terrazzo |
Professional floor maintenance |
|
Limestone |
Gentle cleaning with neutral-pH formulation |
|
Travertine |
Routine cleaning and maintenance |
|
Kota Stone |
Removal of everyday dirt and grime |
|
Slate Stone |
General surface cleaning |
|
Mosaic Tiles |
Floor cleaning and maintenance |
|
Quartz Surfaces |
Cleaning compatible engineered stone surfaces |
Areas of Application
-
Hotels, resorts and restaurants
-
Shopping malls and commercial complexes
-
Residential apartments and villas
-
Airports and railway stations
-
Hospitals and educational institutions
-
Corporate offices
-
Building maintenance and facility management
-
Professional housekeeping services
-
Stone and tile installation contractors
Can be use with other floor scrubber / cleaner with this product, and have had excellent results.
Highly concentrate product after dilution Each ltrs will covers up to 2500 Sq foot.
Dosage & Directions for Use
Recommended Dilution and Dosage
|
Cleaning Requirement |
Trial Dilution (Product : Water) |
Product per Litre of Water |
|---|---|---|
|
Daily floor cleaning |
1:100 |
10 ml |
|
General stone cleaning |
1:50 |
20 ml |
|
Moderate dirt and grease |
1:25 |
40 ml |
|
Heavy surface contamination |
1:10 |
100 ml |
|
Automatic floor scrubber |
1:50–1:100 |
10–20 ml |
These are preliminary development dilutions that must be validated for cleaning efficiency, residue and surface compatibility.
Direction for Use
-
Remove loose dust, sand and dirt from the surface.
-
Dilute RXSOL Stone and Tiles Cleaner with clean water according to the degree of contamination.
-
Apply the cleaning solution using a mop, sponge or suitable floor-cleaning machine.
-
Allow a short contact time without letting the solution dry.
-
Agitate gently using a soft brush for stubborn surface dirt.
-
Remove the contaminated cleaning solution.
-
Rinse with clean water and allow the surface to dry.
For polished marble and natural stone, avoid acidic cleaners, abrasive pads and excessive detergent concentrations. The Natural Stone Institute recommends neutral cleaners for routine natural stone maintenance.
Technical Specifications & Properties
RXSOL All Purpose Professional Stone and Tiles Cleaner
Technical Data Sheet (TDS)
|
Parameter |
Proposed Specification |
|---|---|
|
Physical Appearance |
Clear Liquid |
|
Colour |
Colourless or Light blue |
|
Odour |
Mild pleasant fragrance |
|
Chemical Nature |
Neutral surfactant-based cleaner |
|
pH at 25°C |
6.5–7.5 |
|
Specific Gravity at 25°C |
Target 1.00–1.05 |
|
Water Solubility |
Completely miscible |
|
Foaming Characteristics |
Low foam |
|
Abrasive Content |
Nil |
|
Phosphate Content |
No intentionally added phosphates |
|
Application Method |
Mop, soft brush, spray or floor scrubber |
|
Packaging |
1 L, 5 L, 25 L and 210 L |
|
Target Shelf Life |
24 months, subject to stability testing |
These are proposed product development specifications, not measured RXSOL batch results.
Product Description & Chemical Profile
Product Category: Professional Surface Cleaner / Stone Care Chemicals / Industrial and Institutional Cleaning Chemicals
Brand: RXSOL – RX Marine International
Product Description
RXSOL All Purpose Professional Stone and Tiles Cleaner is a professional cleaning solution designed for the routine cleaning and maintenance of natural stone, ceramic tiles, vitrified tiles, porcelain, granite, marble and other compatible washable hard surfaces.
The product is intended to remove accumulated dirt, greasy deposits, footprints, atmospheric contamination, food stains and everyday surface impurities without unnecessarily affecting the original surface finish when properly formulated and applied.
A pH-neutral formulation is recommended for regular cleaning of polished marble, granite and other acid-sensitive natural stone surfaces.
RXSOL All Purpose Professional Stone and Tiles Cleaner is suitable for professional housekeeping, facility management, commercial establishments, hotels, residential buildings, shopping malls and industrial floor maintenance.
Need pricing, bulk volume, or vessel delivery today?
Send us your required quantity, chemical grade, delivery location, or vessel IMO number. Our technical chemical supply team replies within 1 hour.