RXSOL 27 Gas Turbine Compressor Cleaning Fluid

Home / Products / Air Lines / RXSOL 27 Gas Turbine Compressor Cleaning Fluid
IMPA / ISSA CERTIFIED CHEMICAL FORMULATION

RXSOL 27 Gas Turbine Compressor Cleaning Fluid

Air Lines RXSOL 27 Gas Turbine Compressor Cleaning Fluid
Express Kolkata & Haldia Port 2-4 Hr Berth Delivery
Air Lines
Part No. / SKU: RXSOL-16-1927-210

RXSOL 27 is a concentrated, neutral, environmentally friendly, biodegradable, waterbased detergent cleaning fluid for cleaning and corrosion inhibition of gas turbine compressors.

Available Packaging:
25, 50, 210 Ltrs. Clear pale straw coloured liquid with a mild pleasant odour. Ready available stock in Kolkata, Mumbai, Kandla - Gandhidham, Surat, Chennai - Ennore, Visakhapatnam, Fujairah - Dubai.
Ready Port Stock 25L, 210L Drums & 1000L IBC
IMPA / ISSA Standard MARPOL Compliant Formulations
ISO 9001:2015 QA TDS, MSDS & COA Available

Application & Uses

Gas Turbine Compressor Cleaning.
 
Gas turbine compressor cleaning fluids are specialized cleaning agents used to remove deposits from gas turbine compressors, improving efficiency and performance. These fluids are often biodegradable, water-based, and contain corrosion inhibitors. 
 

Key Features and Benefits

  • Designed to remove oily deposits, airborne dust and compressor fouling.

  • Water-based cleaning system.

  • Low-foaming formulation for controlled compressor washing.

  • Intended for online and offline compressor washing, subject to OEM approval.

  • Helps disperse and remove accumulated contaminants.

  • Proposed temporary corrosion protection for compatible metallic surfaces.

  • Designed for low-residue rinsing.

  • Suitable for development as a concentrate for dilution with demineralized water.

  • Intended for industrial gas turbines and selected turbine-driven compressor systems.

  •  

Dosage & Directions for Use

By spray ring or lance in either starter-driver (off-line) or fired (on-line) wash as directed by the engine manufacturers, in the quantities recommended in the engine manual. It is essential during hot wash that the cleaner should leave as little ash residue as possible to avoid blocking turbine blade cooling holes. RXSOL 27 has a maximum ash content of <0.01%, as part of the compliance with OEM specifications for compressor washing fluid.

The unique corrosion inhibitor allows engines to be left ready for an instant restart, even in salty offshore conditions.

How RXSOL Gas Turbine Cleaner Works

Surfactant Action: Wetting agents loosen oily deposits and atmospheric contamination from compressor surfaces.

Solvent Action: Water-compatible solvents help dissolve hydrocarbon contamination and accumulated organic deposits.

Dispersion: Cleaning agents assist in suspending loosened particles so that they can be removed during washing and rinsing.

Corrosion Inhibition: Compatible corrosion-inhibiting components are intended to reduce corrosion risk during cleaning and temporary shutdown.

Important Formulation Considerations

For manufacturing an RXSOL gas turbine compressor cleaner, the formulation should prioritize:

  • High-purity demineralized water

  • Low-residue, low-foaming nonionic surfactants

  • Low-ash water-compatible solvents

  • Turbine-compatible corrosion inhibitors

  • Very low sodium, potassium, chloride and other harmful inorganic contaminants

  • Compatibility with compressor alloys, coatings, elastomers and synthetic turbine oils

Free From  sodium nitrite, sodium silicate, sodium carbonate or phosphate-based corrosion inhibitor packages without OEM approval. Such additives may leave inorganic residues and create unacceptable hot-corrosion risks.

Gas turbine compressor cleaning specifications can be substantially more restrictive than those for ordinary industrial degreasers.

Technical Specifications & Properties

 
 

:

1.01

Total alkali metals

:

<0.5ppm after dilution

Ash

:

<0.01%

Aromatic compounds

:

None

Alkyl phenol ethoxylates

:

None

Halogens (measured as total Chlorine)

:

<10 ppm for concentrate

 

pH

:

7.5 - 8.5

Specific gravity

:

1.01

Total alkali metals

:

<0.5ppm after dilution

Ash

:

<0.01%

Aromatic compounds

:

None

Alkyl phenol ethoxylates

:

None

Halogens (measured as total Chlorine)

:

<10 ppm for concentrate

 

pH

:

7.5 - 8.5

Specific gravity

:

1.01

Total alkali metals

:

<0.5ppm after dilution

Ash

:

<0.01%

Aromatic compounds

:

None

Alkyl phenol ethoxylates

:

None

Halogens (measured as total Chlorine)

:

<10 ppm for concentrate

 

pH

:

7.5 - 8.5

Specific gravity

:

1.01

Total alkali metals

:

<0.5ppm after dilution

Ash

:

<0.01%

Aromatic compounds

:

None

Alkyl phenol ethoxylates

:

None

Halogens (measured as total Chlorine)

:

<10 ppm for concentrate

 

pH

:

7.5 - 8.5

Specific gravity

:

1.01

Total alkali metals

:

<0.5ppm after dilution

Ash

:

<0.01%

Aromatic compounds

:

None

Alkyl phenol ethoxylates

:

None

Halogens (measured as total Chlorine)

:

<10 ppm for concentrate

 

pH

:

7.5 - 8.5

Specific gravity

:

1.01

Total alkali metals

:

<0.5ppm after dilution

Ash

:

<0.01%

Aromatic compounds

:

None

Alkyl phenol ethoxylates

:

None

Halogens (measured as total Chlorine)

:

<10 ppm for concentrate

 

Technical Specifications

Parameter

Published RXSOL Roto-Clean Specification

Appearance

Clear, pale straw-coloured liquid

Odour

Mild

pH

7.5–8.5

Specific Gravity

Approximately 1.01

Water Solubility

Completely miscible

Ash Content

Below 0.01%

Total Alkali Metals

Below 0.5 ppm after dilution

Aromatic Compounds

None stated

Alkylphenol Ethoxylates

None stated

Total Chlorine

Below 10 ppm in concentrate

These specifications should be confirmed with current RXSOL quality control records before inclusion in a customer-issued COA.

 

pH

:

7.5 - 8.5

Specific gravity

:

1.01

Total alkali metals

:

<0.5ppm after dilution

Ash

:

<0.01%

Aromatic compounds

:

None

Alkyl phenol ethoxylates

:

None

Halogens (measured as total Chlorine)

:

<10 ppm for concentrate

 

pH

:

7.5 - 8.5

Specific gravity

:

1.01

Total alkali metals

:

<0.5ppm after dilution

Ash

:

<0.01%

Aromatic compounds

:

None

Alkyl phenol ethoxylates

:

None

Halogens (measured as total Chlorine)

:

<10 ppm for concentrate

 

pH

:

7.5 - 8.5

Specific gravity

Product Description & Chemical Profile

RXSOL 27 is a concentrated, neutral, environmentally friendly, biodegradable, waterbased detergent cleaning fluid for cleaning and corrosion inhibition of gas turbine compressors. One operation cleans and protects the engine – and also inhibits corrosion.

Blend of non-ionic surfactants, corrosion inhibitors, organic solvents and demineralised water.

RXSOL Gas Turbine Compressor Cleaner & Corrosion Inhibitor

Brand: RXSOL – RX Marine International
Product Category: Gas Turbine Maintenance Chemicals / Compressor Cleaning Chemicals / Industrial Corrosion Inhibitors
Product Type: Water-Based Compressor Cleaner with Corrosion Protection

Product Description

RXSOL Gas Turbine Compressor Cleaner & Corrosion Inhibitor is a proposed specialized cleaning formulation designed for removing atmospheric contamination, oily deposits, airborne dust, grease and other accumulated impurities from gas turbine axial compressor blades and associated components.

During gas turbine operation, contaminants present in the intake air can accumulate on compressor blades, vanes and internal surfaces. These deposits may reduce aerodynamic efficiency, restrict airflow and contribute to compressor fouling.

RXSOL Gas Turbine Compressor Cleaner & Corrosion Inhibitor is intended to combine effective cleaning with temporary corrosion protection, helping maintain compressor cleanliness and reduce corrosion risk during suitable maintenance operations.

The proposed formulation uses low-residue surfactants, water-compatible cleaning agents and corrosion-inhibiting additives.

 

Important: Gas turbine compressor cleaning is an OEM-controlled application. The finished chemical must meet the turbine manufacturer's limits for ash, sodium, potassium, chlorides, sulfur, residue, material compatibility and cleaning method before use.

Kolkata & Haldia Port Logistics Desk

Need pricing, bulk volume, or vessel delivery today?

Send us your required quantity, chemical grade, delivery location, or vessel IMO number. Our technical chemical supply team replies within 1 hour.

Need a quote for this product?

Tell us the grade, packing and quantity you need — we ship across India and to major ports.

Request a quote chemicalkolkata @ gmail.com