RO Chlorine Neutralizer
RO Chlorine Neutralizer SMBS 97 RO dechlorination chemical chemical purpose is to remove residual chlorine before the feedwater enters chlorine-sensitive reverse osmosis membranes.
Application & Uses
Major Applications
1. Reverse Osmosis Membrane Protection
Used to neutralize residual chlorine before water enters polyamide RO membrane systems.
2. Industrial RO Plants
Suitable for chemical pretreatment systems in industrial water purification plants.
3. Seawater Desalination Plants
Can be used in suitable seawater RO pretreatment systems where chlorine is applied upstream and must be removed before membrane contact.
4. Brackish Water RO Systems
Used for dechlorination of municipal, groundwater or surface-water feeds that have undergone chlorination.
5. Boiler Feedwater RO Systems
Helps protect RO membranes used to prepare high-quality water for boiler feedwater treatment.
6. Pharmaceutical and Process Water Systems
Can be evaluated for appropriately controlled industrial and high-purity water treatment systems, subject to application-specific chemical quality requirements.
Dosage & Directions for Use
Recommended Dosage
The RXSOL-33-9735-025 RXSOL RO Dechlorination Chemical reference document indicates approximately 9 ppm of product for removal of 1 ppm of residual chlorine.
This figure may be used as a reference benchmark for RXSOL product development. The final RXSOL dosage must be determined from the actual active concentration and dechlorination performance.
| Residual Chlorine in RO Feedwater | Reference Product Dosage |
|---|---|
| 0.2 ppm | 1.8 ppm |
| 0.5 ppm | 4.5 ppm |
| 1.0 ppm | 9.0 ppm |
| 1.5 ppm | 13.5 ppm |
| 2.0 ppm | 18.0 ppm |
The above values are proportional calculations based on the GENERAL APPLICATION.
Application Procedure
-
Measure residual free chlorine in RO feedwater.
-
Determine the required dechlorination chemical dosage based on active content and water conditions.
-
Install a suitable chemical metering pump and injection arrangement.
-
Inject the chemical into the RO feedwater line at a location that provides sufficient mixing and reaction time.
-
Monitor residual chlorine downstream of chemical injection.
-
Confirm chlorine removal before water enters chlorine-sensitive RO membranes.
-
Adjust the dosage according to feedwater chlorine variation and operating conditions.
Technical Specifications & Properties
Technical Specifications
| Parameter | Proposed Description |
|---|---|
| Appearance | Clear liquid |
| Chemical Nature | Reducing agent |
| Active Chemistry | Sodium bisulfite-based |
| Water Solubility | Water-miscible |
| Application | Residual chlorine removal |
| Dosage Method | Continuous metering |
| Recommended Injection | RO feedwater pretreatment line |
| Density | To be established |
| pH | To be established |
| Shelf Life | Subject to stability testing |
| Packaging | Proposed 20 kg, 30 kg and 220 kg |
These are development specifications.
Recommended Industrial & Shipboard Areas
RXSOL – Industrial RO Water Treatment, Membrane Protection and Dechlorination Chemical Solutions
Contact RXSOL for product selection, technical specifications, dosage recommendations and bulk supply enquiries.
Important technical clarification from the reference
The RXSOL RO Dechlorination Chemical document describes a blend of “sodium bisulphate and a catalyst.” However, sodium bisulphate (NaHSO₄) is an acid salt, not the conventional reducing agent used for chlorine removal.
Product Description & Chemical Profile
RXSOL RO Dechlorination Chemical – Rapid Chlorine Neutralizer for Reverse Osmosis Membranes
Product Name: RXSOL RO Dechlorination Chemical
Brand: RXSOL – RX Marine International
Product Category: RO Membrane Protection / Water Treatment Chemicals
Chemical Type: Liquid Reducing Agent / Dechlorination Treatment
RXSOL Product Code: RXSOL-33-9735-025
Product Description
RXSOL RO Dechlorination Chemical is a liquid chemical treatment designed for the removal of residual free chlorine from reverse osmosis (RO) feedwater before the water enters the membrane elements.
Residual chlorine is a major concern in RO systems equipped with chlorine-sensitive polyamide membranes. Even low concentrations of oxidizing chlorine can damage the membrane's selective layer, resulting in increased salt passage and deterioration of membrane performance.
RXSOL RO Dechlorination Chemical is intended to neutralize residual chlorine through a controlled chemical reduction process, helping protect RO membranes and maintain reliable desalination performance.
The proposed product can be developed using sodium bisulfite-based chemistry, with a suitably validated catalyst system where rapid dechlorination is required.
Need pricing, bulk volume, or vessel delivery today?
Send us your required quantity, chemical grade, delivery location, or vessel IMO number. Our technical chemical supply team replies within 1 hour.