This heavy duty cleaner has been designed specifically for fast and easy removal of asphalt and tar deposits from equipment and tools. The superior solvent combination with solvent sealers in the formula has a high affinity for asphalt and tar deposits, first with a softening and dissolving action that digs deep and secondly one that holds residues in an emulsifiable form to be later flushed away with a water rinse. Maintenance is made easy on road building, municipal, institutional or fleet equipment. Start using this product today and increase the appearance and working value of your tools and equipment. This product works wll for blacktop contractors, roofing contractors, municipal and fleet operators.
Apply, as is for maximum performance, by spray, brush, mop and wiping. For light deposits allow to stand 5 to 10 minutes, for medium deposits 1 hour and for heavy and old deposits up to 12 hours (overnight). Reapplication of product during standing will provide greater penetration. For final removal flush with water from hose nozzle or high pressure cleaning equipment. For immersion of tools this concentrate can be diluted with up to 2 parts kerosene, light fuel oil or mineral spirits for further economy. Don’t dilute this product more than 1 part to 5 parts mineral spirits or you will loose the great penetrating quality of this product.
Multiple Solvent Action goes to work Immediately
Unsurpassed for deep penetration
Powerful emulsifying action floats away deposits
Reduces Chipping and Scraping
Free rinsing
Easy to Use
Reduces Maintenance time
Will Not harm most painted surfaces
| Product Name | RXSOL-10-1725 |
| Product Type | Tar and Asphalt Remover Conc. |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 27815541 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |
|
COMPONENTS-CHEMICAL NAMES AND COMMON NAMES
(Hazardous Components 1% or greater; Carcinogens 0.1% or greater)
|
CAS Number |
SARA
III LIST
|
Applicable PEL-OSHA |
Exposure Limits TLVACGIH |
Carcinogen
Ref. Source **
|
|
ETHYLENE GLYCOL MONOBUTYL ETHER |
111-76-2 | Yes | 25 | 25 | d |
| MONOCHLOROTOLUENE (MIXED ISOMERS) | 25168-05-2 | No | N/E | N/E | d |
| ORTHO ISOMER | 95-49-8 | No | N/E | 50 | d |
| PARA ISOMER | 106-43-4 | No | N/E | N/E | d |
| SOLVENT NAPHTHA (PETROLEUM) HEAVY AROMATIC | 64742-94-5 | No | N/E | N/E | d |
|
PRIMARY ROUTES OF ENTRY: |
[ ] INHALATION [ ] INGESTION [ X ] SKIN ABSORPTION [ X ] EYE [ ] NOT HAZARDOUS |
|
ACUTE EFFECTS |
Systemic: CNS depression producing headache, dizziness, numbness, loss of consciousness. |
|
Inhalation: |
Irritation of upper respiratory tract. Exposure to high concentrations may cause systemic toxicity. Aspiration into lungs can cause chemical pneumonitis
|
|
Eye Contact: |
Irritation. |
|
Skin Contact: |
Dermal irritation & dermatitis attributable to defatting of skin. |
|
Ingestion: |
Irritation of gastrointestinal tract. See also systemic effects above |
| CHRONIC EFFECTS: | Chronic exposure to high concentrations may cause some liver or kidney disfunction |
| Medical Conditions Generally Aggravated by Exposure: | Liver or kidney disease. May aggravate pre-existing irritation. |
|
Eye Contact: |
Flush with water for 15 minutes. Get medical attention. |
|
Skin Contact: |
Flush skin with water then wash with soap and water. If irritation occurs, get medical attention. |
|
Inhalation: |
Remove to fresh air. If not breathing, administer artificial respiration. Get medical attention. |
|
Ingestion: |
DO NOT INDUCE VOMITING. Drink 3 to 4 glasses of water. Get immediate medical attention. If vomiting occurs, keep head below hips to
prevent aspiration.
|
|
FLAMMABILITY as per USA FLAME PROJECTION TEST (aerosols)
|
N/A
N/Auto Ignition TemperatureE
|
|
Auto Ignition Temperature
|
N/D |
| Flammability Limits in Air by % in Volume: | |
| % LEL: | N/D |
| % UEL: | N/D |
| FLASH POINT AND METHOD USED (non-aerosols): | 141ºF (TCC) |
| SPECIAL FIRE FIGHTING PROCEDURES: |
Burning product may give off nox - ious & toxic fumes. Firefighters should wear NIOSH approved self -contained breathing apparatus.
|
| EXTINGUISHER MEDIA: |
Water fog, foam, dry chemical or CO2. Burning product may float on water.
|
| Unusual Fire & Explosion Hazards: | Burning product may float on surface of water and spread fire to other areas. |
--------------------
|
Steps To Be Taken If Material Is Spilled Or Released: |
Do not allow large spills to contaminate sewers, ground or surface waters. Contain spill & soak up in inert absorbent material. Place in leak-proof containers for proper disposal. |
|
Waste Disposal Methods: |
Dispose of in accordance with all local, state and federal regulations |
| Precautions To Be Taken In Handling & Storage: |
Store in original shipping containers. Keep closed when not in use. Shelf life 1 year. Protect from extreme heat and cold
|
| Other Precautions &/or Special Hazards: | KEEP OUT OF REACH OF CHILDREN. Read & follow label directions. Do not cut, weld or drill on drums whether full, part full or empty. |
|
Respiratory Protection (specify type): |
None required under normal conditions of handling and use. |
|
Protective Gloves: |
Solvent resistant |
|
Eye Protection: |
Chemical goggles. |
| Ventilation Requirements: |
Special ventilation not normally needed. If required to maintain concentrations below specified levels use explosion proof ventilation.
|
| Other Protective Clothing & Equipment: | Solvent resistant, as needed. Eyewash station and safety shower |
| Hygienic Work Practices: | Do not eat, drink or smoke in work area. Wash hands after handling. |
|
Boiling Point: |
N/D |
|
Specific Gravity (H2O=1): |
0.93 |
|
Vapor Pressure: |
PSIG @ 70°F (Aerosols): N/A |
|
Vapor Pressure (Non-Aerosols)(mm Hg and Temperature): |
N/D |
|
Vapor Density (Air = 1): |
>1 |
| Evaporation Rate ( BUAC = 1): | 1 |
| Solubility in Water: | Dispersible |
| Water Reactive: | No |
| Appearance and Odor: | Clear amber, non-viscous liquid with aromatic solvent odor. |
|
STABILITY |
[ X ] STABLE [ ] UNSTABLE |
|
HAZARDOUS POLYMERIZATION |
[ ] WILL [ X ] WILL NOT OCCUR |
|
Incompatibility (Mat. to avoid): |
Strong oxidizing agents. |
| Conditions to Avoid: | Heat, sparks and open flame |
|
Hazardous Decomposition Products: |
Oxides of nitrogen, carbon, hydrogen chloride, unidentified organics. |
----------------------------
---------------------------
--------------------------
--------------------------
--------------------------
--------------------------
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.