RXSOL Solvent-based tank cleaners is highly effective to remove tough residues. Concentrated effective cleaner for contaminated FUEL OIL, cargo tanks. It's high emulsification formula easily react with residue / sludge deposits .RXSOL-20-2029-020 is used as a tank cleaner or for general degreasing, cleaning and gas freeing for double bottom tanks, wing tanks, tank lines, fuel oil tanks, etc.
- High solvency action for heavy hydrocarbon residues
- Effective on sludge, wax, and asphaltic deposits
- Works efficiently in both hot and cold cleaning
- Non-corrosive and safe on tank materials
For tank cleaning 0.05% to 0.5% , Non corrosive . It may safely be applied on all metal surfaces.
Tank Cleaner and Degreaser Quickly removes oil, grease, gimres, adhesive and dyes. Best results also achieved forcleaning of oil side of fuel and lube oil heat exchangers. Used as a tank cleaner or for general degreasing , cleaning and gas freeing for double bottom tanks, wing tanks, tank lines, fuel oil tanks, etc .
RXSOL-20-2001-210 is highly concentrated organic / inorganic emulsifier with powerful penetrating agents, corrosion inhibitors and surfactants.
Product Properties
|
Colour |
Clear light brown liquid |
|
|
|
Density |
In g/cm3 at 15°C: 0.99 |
|
|
|
Flash Point |
(PMCC)°C: Above 62 |
|
|
|
Copmtibility |
|
|
When mixed with water, a clear emulsion is formed. |
|
Metal |
No known effect |
|
|
|
Rubber |
May swell |
|
|
|
Sythetic Rubber |
May swell |
|
|
|
Packaging |
RXSOL-20-2001-210 |
(in Litres) |
Flash Point : > None |
Tank Cleaner HD is powerful Solvent based Emulsifier, Effectively CLEANS oily greasy mud, Effectively works on Black Oil, Furnace Carbon deposited mess. RXSOL TANK CLEANER HD is blended with new generation penetrating solvent and Emulsifier to make cleaning easy and fast.
**Used as a multi-purpose degreaser in extremely hard cleaning conditions**
Characteristics
It is cost effective, easy to apply and use.
• High emulsification on mineral oils and petroleum based chemicals.
• Safe to use on most metal surfaces, painted surfaces and tank coatings.
• Cleans oil coolers, fuel oil pre heaters and lube oil heat exchangers.
• Removes general oil contamination from machinery and engine room.
• Economical cost effective .
**For detailed information on safety & health, Please refer to Material Safety Data Sheet & /or Product Label**
Using-Procedure
Spraying:–
This can be beneficial as part of the initial cleaning process after the carriage of Lube oils and Lube oil additives. As soon as the tank in question has been checked empty by the attending surveyor, RXSOL-20-2001-210 should be sprayed over all surfaces which are safely reacheable.
Portable machines:–
After 45 minutes the butterworth machines should be operated for 3 x 20 minutes drops using warm 60o C, then the machines brought back to the top and a full hot wash 80 – 85 o C should be carried out for at least 6 hours.
Fixed machines:–
Wash ambient for 45 minutes followed by warm water for one cycle before increasing to hot (80oC) for 4 hours.
Injection:–
This can be carried out by injecting RXSOL-20-2001-210 into the butterworth system after the heater. A normal amount to use would be 100 – 150 liters during the initial washing cycle. Water temperature should be 60o C during the injection period then brought up to 80 – 85 o C for the full washing period.
Re-circulation:–
Possibly the best result are achieved by re-circulating a solution of RXSOL-20-2001-210 after the initial rough washing of the tank. A sufficient amount of fresh water to maintain good suction should be heated to 60 o C and approximately 420 liters of RXSOL-20-2001-210 (2 drums) added for each 500 liters of fresh water. The temperature of the mixture can be increased depending upon the melting point if the product being cleaned. The solution should be circulated for at least 4 hours and the butterworth machines operated at maximum pressure in all areas of the tank throughout this process. If a number of tanks are to be circulated, then a substantial quantity of solution can be made so that transfers can be made without delay and any small amounts lost will not affect the operation. Normally following transfer to another tank, 100 liters RXSOL-20-2001-210 is added for each 5000 liters of solution. This is called “spiking”.
Following the re-circulation process, the tank must be hot butterworthed 80-85o C for at least 6 hours.
*Use a strainer at the pumpstack when circulating any solution RXSOL-20-2001-210 is recommended for local cleaning and degreasing and may be applied by brush, hand spray, immersion, soaking or any other conventional means. Apply concentrate RXSOL-20-2001-210 over soiled area and wait for 20-30 minutes before rinsing off with water.
Soak Method:-
For heavy oil and soil Put parts to be cleaned into a bath of concentrate RXSOL-20-2001-210 and for medium to light soiling use a solution of 10-30% RXSOL-20-2001-210 in water. Parts should be soaked for at least 30 minutes before washing off with water.
Spray-Method:-
Spray concentrate RXSOL-20-2001-210 over all soiled areas. With in 15 and 30 minutes, RXSOL-20-2001-210 starts its function then rinse off by water hose. For stubborn deposits, agitation by scrubbing will assist the cleaning operation .
Cargo Tank Cleaning after Mineral Oils
Direct injection method:–
Make a solution of RXSOL-20-2001-210 between 0.1 and 2.0% i.e. one to twenty litres per ton wash water. Then use with Tank cleaning machine , Best results are obtained when water is heated to a temperature between 60 to 80°C. Slops Should be Constantly Stripped from, tank.
Recirculation method / Ship's Rocking Mottion:–
Make soln. Strength with RXSOL-20-2001-210 between 0.5 –3 % and used with Tank Cleaning machines OR fill the tank to 20-30% volume with sea water and add the RXSOL-20-2001-210 up to full dose . For better results heat the solution between 60 - 80°C.
NOTE : Dose rate and results will vary depending on amount of contamination.
Spot cleaning- RXSOL-20-2001-210 (concentrate) can be sprayed over surfaces and left for 20 - 30 minutes Finally wash down the tank surfaces with hot water between 60°C and 80°C with high pressure machine . Keep stripping tank slops and transfer to holding tank/slop tank.Cleaning of theOil side of Lube Oil Heat Exchangers Cleaning is best achieved by the recirculation method using a heated 20% solution of RXSOL-20-2001-210.
1) First of all drain off any remaining oil from Heat Exchanger.
2) Connect the discharge side of a portable pump to the lower heat exchanger connection & the suction Side of the pump to the bottom outlet of a 200 litre drum.
3) Complete the circuit by connecting the upper connection on the heat exchanger to the top of the drum.
4) Maintain the bath temperature between 60-80 0 C throughout the cleaning operation. If it is not possible to heat, the operation will need to be extended.
5) Use the pump to maintain circulation for 12 to 15 hours. When the cleaning is completed, disconnect the lower heat exchanger connection and drain out the cleaning solution.
6) Connect a fresh water supply to the upper heat exchanger connection, and rinse until the water runs clean from the lower connection. When rinsing is complete, disconnect the water supply and thoroughly drain and dry the heat exchanger
| Product Name | RXSOL-20-2029-020 |
| Product Type | TANK DEGRESOL A Heavy Duty |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Kolkata, Chennai, Visakhapatnam, Haldia, Fujairah, Muscat
| Phone | +91 22 65113333 / 5555 / 9999 / 27611360 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| 0Email | mail@rxmarine.com |
Chemical characterization
Description:Mixture contains: Emulsifiable liquid of Aliphatic & Aromatic fuel ( 20 to 30% ) Along with Butoxyethanol , Emulsifying agents as surfactants, FattyAcid derivative ( biodegradable substance 85 to 90%) and Ethoxylate . And with harmless addition.
N Dangerous for Enviroment Environmental Hazards None Human Health Hazards Moderates , may cause lung damage if swallowed
NOTE: Person-related safety precautions required.
( Take affected persons out of Danger area and instruct to lie down )
|
After inhalation |
On Inhalation move to fresh air / Arificial respiration . Get medical attention in case of symptoms |
|
After skin contact |
Instantly wash with water and soap and rinse thoroughly. Generally Non Irritating, Protective clothing require |
|
After eye contact |
Rinse opened eye for several minutes under running water. If symptoms persist, consult doctor. |
|
After swallowing |
( On persistent symptoms Harmful, if ingested,Do not induce Vomiting. Get medical attention. |
|
Extinguishing Media |
Cool endangered container with water |
|
A. Suitable |
Foam ,dry Co2, water spray |
|
B. Not suitable |
Not applicable |
|
C. Special |
Not applicable , |
|
Direct water jet on larger fire |
Masked with Air Respirator Protection of fire Fighter |
NOTE :Absorb with liquid-binding material (sand,diatomite,acid binders,universal binders,sawdust ,oil adsorbent).
|
Care for environmental protection |
Prevent material from reaching sewage system, holes and cellars. Dilute with much water. |
|
PROCEDURE for cleaning/collecting |
Remove RXSOL TC 2001 with absorbent materials or mechanically .And dispose accordance with section , Then flush with water and ventilate well. |
Ensure adequate ventilation
|
Handling |
Eyewash facilities require at workplace |
|
Storage |
General Storage , container should be tightly. Protect from direct sunlight and heat flames. |
|
Methods of cleaning |
Flush Spill Area with Water |
NOTE Keep Container Tightly Closed
ENVIROMENTAL PRECAUTION
Readily Bio-Degradable , missible with water ,low toxicity , No environmental problem on correctly usage.
PERSONAL PROTECTION
|
Respiratory System Protection |
Breathing equipment Not required |
|
Eye Protection |
wear eye protection (on possibility of contact) |
NOTE : -
The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace. Wash hands during breaks and at the end of the work. Avoid contact with the eyes and skin. Keep away from foodstuffs, beverages and food
|
Protection of hand |
Protective gloves , wash hand after touch. |
|
Eye protection |
Tightly sealed safety glasses |
PRODUCT PROPERTIES
|
Appearance |
Clear liquid / Low viscous |
|
|
Odor |
Characteristic / Odorless |
|
|
Density |
In g/cm3 at 15°C: 0.99 NOTE : SHELF LIFE 5 YEARS |
|
|
Boling Point |
MATERIALS BOILS AT 160°C |
|
|
Flash Point |
None |
|
|
Flammability |
Not self Igniting |
|
|
Explosive |
Not Explosive |
|
|
Solubility in Water |
100% soluble fully miscible EFFICIENCY |
|
|
Compatibility |
|
A .SEA WATER 70% |
|
Metal |
No known effect |
|
|
pH |
6 +0.5 |
|
|
PACKAGING |
Order No. |
Size (in litres) |
|
Condition to Avoid |
Heat, Flame & Other Sources of Ignition |
|
Materials to Avoid |
Do not subject to Reducing /Oxidizing Agents. |
|
Hazardous Decomposition Products |
Do not occur |
NOTE : No decomposition if used according to specifications.
|
Skin Irritation |
irritant wash with soap water |
|
Eye Irritat |
Moderate irritant , flush with copious amounts of water |
|
Sensitization |
Not Sensitizing . |
(All above information as per data available with us)
|
Comment |
Not applicable |
|
Ecotoxicity |
Not applicable , Readily biodegradable |
Water hazard class 2 (self-assessment): hazardous for water.) Do not allow product to reach ground water, water bodies or sewage system. Danger to drinking water if even small quantities leak into soil.
This material must be disposed with local national regulations. Product Recommendation ( Recommended cleaning agent :water ) Must be not dispose of together with household garbas. Can be burnt under adherence to the necessary technical regulations. Disposal must be made according to official regulations. Can be reused or recycled after cleaning .
LAND TRANSPORT 9, Miscellionus Dangrous, substance and article
• Marine pollutant:
• Hazard designation of product: Xi Irritant.
• Irritating to eyes and skin.
• Safety phrases Keep out reach of children If swallowed, seek medical attention immediately
Harmful if swallowed In case of contact with eyes, rinse immediately with plenty of water and
seek medical attention. Do not Breathe After contact with skin, wash immediately with plenty
of water and soap and rinse thoroughly. Risk of serious damage to eyes
• National regulations
These data are based on our present knowledge. However, they shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.Department issuing data specification sheet Environment protection department.
NOTE : NO ENVIRONMENTAL PROBLEMS ARE EXPECTED IF THE PRODUCT IS HANDLED CORRECTLY.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.