Direct to Surface Heavy Duty acidic detergent Specially designed for removal of Liquid Soluble Salt Remover targets and removes liquid soluble salts such as chlorides, nitrates, and sulfates rust from any steel surface area also acts as rust proofing agent. It is non-flammable. Prevents further rusting. Detergent cleans Metals surface. And useful product in maintenance and cleaning sector. In the food and Beverage industry, Metals Clean Britte is used as a rust remover. Largest seller and supplier of Super Dilac Acidic Detergent in INDIA Oman, GULF Middle East AND NAIROBI KENYA Africa.
RXSOL Salt Remover Passivation Liquid is a specially formulated acidic surfactant-based cleaning solution designed for effective removal of salt deposits, mineral residues, and light corrosion products from metallic and non-metallic surfaces.
The formulation combines controlled acidity with surface-active agents, enabling deep penetration and dissolution of salt crystals while simultaneously assisting in surface conditioning (passivation effect), thereby reducing the risk of further corrosion.
- Marine and offshore equipment exposed to seawater
- Ship decks, pipelines, and engine room components
- Heat exchangers and condensers
- Storage tanks and metal surfaces before painting/coating
- Industrial machinery affected by salt deposition
- Desalination plants and coastal installations
RECOMMENDATION : Ready to use direct from the container- Single Component Product no dilution necessary.
FIELD:- Typical Coverage: 300 square feet per gallon
specially designed for Soluble Salt Remover is a pre-mixed, Direct-To-Surface solution to ensure a salt-free surface prior to coating..
Procedure for Use :- is an organic bonding chemical blend which aids in the removal of chlorides, sulfates and nitrates and most other soluble salts.
- RXSOL-10-1011-025 is highly concentrate
- Always use directly on surface
- The surface should be sound clean and free of oil, grease, dirt etc.
- Apply on the rusted / salted area for 15 to 20 minutes For stubborn hevy deposits.
PRODUCT PROPERTIES :
| APPEARANCE | Clear Liquid | |
| DENSITY | g/cm3 at 15°C: 1.2 | |
| pH | 2.5-3.5 | Buffer Action of materials makes it different from other BRAND. |
| COMPATIBILITY | ||
| METAL | Suitable for M.S and S.S metal | |
| RUBBER | No known effect | |
| PACKAGING | Order No. RXSOL-20-1011-210 | Size (in litres) 25 , 35 , 210 |
Organic bonding chemical blend that removes chlorides, sulfates, and nitrates, and is used as a hand wash before applying primers
Specially designed for removal of salts deposits and rust from any steel surface area and rust stain And act as surface brightner.
Warning : In case of contact with skin, wash immediately with plenty of water. Use chemical resistance PVC gloves for skin contact and also use face mask for eye and face protection.
Read the Material Safety Data Sheet before using this products.
Key Features of Salt Remover Cleaner
- Heavy-Duty Salt Removal
- Rust & Corrosion Cleaning
- Passivation Protection
- Non-Flammable Formulation
Specially designed for removal of rust from any steel surface area and rust stain from Brass, Copper, S.S, wood, ceramic and aluminium surfaces, painted or not. And act as surface brightner. Also acts as the rustproofing agent before the application of paint or coatings. It is non-flammable. Prevents further rusting.
Metals Britte is one of popular maintenance and cleaning chemicals in marine, shipping lines and oil field industries. You shouldn't use Acid like, vinegar, or HCl on rust to clean it because, although it initially dissolves the rust, it leaves the steel very active and prone to immediate re-rusting ("flash rusting"). What you want is Rust remover like Metals Clean Brittee and Rust Converter, which is phosphoric acid based detergent which has the capability of converting the dusty, flaky red rust to stable "black rust". In general Alkalis like lye also peoples are using which is good at dissolving oil and grease, but don't convert rust so metal starts immediate re-rusting.
Dont expose your precious metal parts to any chemicals, Many chemicals supplier only engaged to provide cheaper solution doesn't know chemistry of rust. Rust Dissolving is chemicals process, Metals Britte is combination of Corrosion Inhibitor, Phosphoric acid, Proprietory blend of detergent and most important things Buffer mixture which is stands to protect metal against acid attack.
We are not only sailing product in large scale, but also building strong relation with our users. Our daily study and knowledge in chemistry given us opportunity to develop and research many new products. We are bounded to provide best product to our customer.
1) pH 7.0 indicating balance of H+ or OH- .
2) pH less than 7.0 there is an excess of H+, the lower the pH, the more H+.
3) pH over 7.0 there is an excess of OH-, the higher the pH, the higher the OH- concentration.
| Product Name | RXSOL-38-1011-025 |
| Product Type | Super Dilac Acidic low foaming Detergent METALS CLEAN BRITTE |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Chennai, Ennore, Visakhapatnam, Kolkata, Haldia, Fujairah UAE, Muscat, Nairobi
| Phone | +91 22 27815541 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |
|
Ethoxylated Fatty alcohol, Proprietiry blend Phosphoric ACID based compound with Linear Alkyl derivative remaining which is not in the list of hazardous materials . |
| Odour | Odourless |
| Appearance |
Liquid, pale yellow, soluble in water |
| Contact with eyes | Can cause damage to the eyes |
| Contact with skin | Causes burns (R34) |
| Inhalation | Vapours or aerosols may cause irritation of eyes, nose and respiratory tract, Can cause damage to the lungs |
| Ingestion | The ingestion of significant quantities may cause damage to digestive syste |
| INHALATION |
After inhalation medical attention require |
| SKIN contact | In case of contact with skin , wash immediately with plenty of water and soap Remove contaminated clothes. |
| EYE contact | Flush with running water for at least 15 minutes Immediately medical attention require. |
| INGESTION | seek medical attention , try to drink more plenty of fresh water. |
Non combustible product
| Suitable |
Not known , on direct exposure to heat dangrous emission of gas of COx SOx can be released |
| Not suitable | Not applicable |
| Special | Not applicabe |
| Protection of fire Fighter | Not applicable |
| Precaution for fire-fighters | Wear protective equipment with breathing apparatus. |
| Enviromental Precaution |
Direct flow into drainage system, surface or ground water is prohibited. First of all neutralize with alkaline materials like lime powder for pH balancing between 6-10. |
| Cleaning Method | Flush Spill Area with Water and avoid contact with skin and eye. |
| Condition to Avoid |
Non flammable but avoid direct heating |
| Materials to Avoid | Do not subject to ALKALINE medium. |
| Handling | Keep Container Tightly Closed |
| NOTE | Eyewash facilities require at workplace |
|
The product causes corrosion on skin and mucous membranes Pl. Note that In case of discharge of acidic or alkaline products into the sew- erage system the pH must be in the range of 6-10 since higher or lower pH values may damage the sewerage system or impair biological dos- age treatment plants. So that for maintaining pH we have to add acidic / basic medium neutaliser . For example if pH is less than 6 basic neutraliser is required and if pH is more than 10 acidic nature neutraliser is required. For details of any guideline pl. Visit our technical website www.rxmarine.com • Dilute in water (always use plastic jar and RXSOL should be added to water never add water to RXSOL.) |
|
|
Personal protection: |
|
| Respiratory System Protection | Approved respirator must be worn when spraying |
| Eye Protection | Strictly wear eye protection |
| Hand protection |
wear PVC chemical resistance protective gloves |
| Appearance |
Clear liquid Slightly HAZY |
| Density | g/cm3 at 15°C: 1.18 – 1.28 gram / cm3 |
| pH | 10% solution 1.5-2.5 |
| Flash Point | Not applicable |
| Compatibility | |
| Metal | Concentrate and long touch may corrode. |
| Rubber | No known effect |
| Decomposition Products | Do not occur if stored and used as directed. In FIRE combustion CO, CO2 , NH3 , SOX etc gas produced. |
| NOTE | AVOID CONTACT WITH ALKALINE SUBJECT. |
| Skin Irritation | Cause severe irritation |
| Eye Irritat | Cause severe irritation |
| Sensitization | Cause Sensitizing |
| Chronic Toxicity | Not Identified |
| Carcinogencity | No. |
|
RXSOL-16-1011-025 is biodegradable . |
|
As per guide line of local rules and regulation |
| Transport over land ADR/RID | 1805 8/11c 8/11c |
| Transport over inland waterways ADN/ADNR | |
| Transport over sea IMDG |
8 |
| Transport by air ICAO/IATA | 8/1805 |
| Diluted Food Grade Phosphoric acid | |
| sea | EMS 8-08, MFAG 700 PG III |
| Classification and labelling according to 4. Novelle Gefahrstoff-Verordnung | |
| Symbols of danger |
C Corrosive |
| Ingredients | Diluted Phosphoric acid |
| R-phrases | R34 : Cause burns |
| S-phrases |
S26 : In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S45 : In case of accident or if you feel unwell, seek medical advice immediately |
| National prescriptions | |
| Water hazard class (WGK) | 2 (self classification on the basis of component assessments or analogy conclusions without addition/subtraction of points for good/poor biodegradability etc.) |
|
This information is based on our current level of knowledge and relates to the product in the state in which it is delivered. It is intended to describe our products from the point of view of safety requirements and is not intended to guarantee any particular properties. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable |