Fast and effctive scale remover. It is a superior heavy duty POWDER containing accelerators, corrosion inhibitors & wetting agents with scale dissolver. Specifically formulated to remove rust and water scale build up from boiler evaporators, heat exchangers, cooling systems, pipeline collection system etc. Highly effective on heating. Safe and easy handling and storage.
- Non-combustible solid
- Also can be use for removal of loose corrosion products, Organic Foulant, And deposition of clay and SILT deposit.
- Biodegradable chemical compound without FUMES increases its popularity and also makes it EASY to HANDLE.
Scale and Rust Remover (Powder)
RXSOL-54-1008-025 is a dry acid cleaner formulated to remove rust and scale deposits from boilers, diesel engine cooling water systems, condensers, evaporators, calorifiers and heat exchangers.
This product is compatible and suitable with aluminum, copper, zinc, galvanized metals, steel boilers etc.
Powder Acid for Removal of Scale and Rust
APPLICATION : Boilers, Calorifiers, Heat Exchanges, Diesel Engine Cooling system, Condensers, Evaporators & other type of equipment where rust & scale form.
| Appearance | Reddish / Yellowish / white – Powder ( without indicator ) |
| Density | 1.2g/cm3 |
| pH | (10 wt %):1.1 |
| Compatibility |
| Metal | Suitable aluminium, zinc, tin and their alloys. Stainless steel, Carbon Steel, Cast Iron, Titanium, Copper , Copper alloys, PVC, Plastic , Rubber | Rubber | No known effect |
| Rubber | No known effect |
Suitable and very popular product for DESCALING of high and low pressure boilers, Heat EXCHANGERS etc. Its corrosion inhibitor blend PROVIDE metal protection
This is mixed with fresh water 3 to 20 percent depending on deposition of scaling. After using SA-1008, sense all metal surfaces with 0.5 percent of RXSOL-54-1008-025 at least 2-4 house , up to neutrial of PH valve.
Procedure-of-use: The most effective descaling is accomplished by circulation.In the case of small components,the soak method in an immersion bath can be used. If the equipment to be cleaned is contaminated by oil, grease or sludge, then pre-cleaning with DEGREASER ( RXSOL OB 1005 ) is necessary. Depending on the extent of scaling, use a solution of 2.5-10% RXSOL-54-1008-025 . The solution will have a red colour which changes to orange when 85% of the acid has been neutralized , & to colourless when the solution is totally neutralized. Whenever possible, the solution should be heated to 60°C.Neutralised solutions can be re-activated by adding more RXSOL-54-1008-025 until the red colour reappears. This should not be done more than twice. RXSOL-54-1008-025 should not be used on Aluminium , Zinc, Tin or Galvanized surfaces.
Fields: Descaling of Boilers, Descaling of Diesel Engine Cooling Systems, Condenser, Pipeline collection system, Evaporators, Calorifiers, Heat Exchangers,The strength of the acid can be enhanced by adding 1part sodium chloride (common salt) to 20 parts of Descale Powder.If salt is not available, an acceptable alternative is to dissolve RXSOL-54-1008-025 in sea water. After use of RXSOL-54-1008-025 a 0.5% solution of Alkalinity Control in fresh water should be used for neutralization.
Evaporators, Calorifiers, Heat Exchangers:
The strength of the acid can be enhanced by adding 1 part sodium chloride (common salt) to 20 parts of Descale Powder. This enhancement of the cleaning solution, however, should not be used when descaling diesel engine cooling water systems. After use of Descale Powder a 0.5% solution of Alkalinity Control in fresh water should be used for neutralisation.
PRODUCT PROPERTIES :
| Appearance | Reddish / Yellowish / white – Powder ( without indicator ) | |
| Density | 1.2g/cm3 | |
| pH | (10 wt %):1.1 | |
| Compatibility | ||
| Metal | Avoid aluminium, zinc, tin and their alloys. Avoid galvanised surfaces | |
| Rubber | No known effect | |
| Packaging | Order No.: RXSOL-54-1008-025 | Size (in kg)25, 5, 20 |
Characteristic:
-Powder product-safe and easy handling and storage.
-Fast and effective scale remover,It is water-soluble,non-flammable, non-volatile and non-hydroscopic Inhibitors
-protect metals. Requires no heating unless its activity is required to increase fast.Contains anti-foam agent .
-Colour indicator shows solution strength.
-Removes scale from boilers.
-Removes scale from Diesel Engine cooling systems.
-Removes scale and rust from Condensers, Evaporators,Heat Exchangers etc.
DESCALING POWDERED ACID manufacturer in Dubai Sharjah UAE
| Product Name | RXSOL-54-1008-025 |
| Product Type | Descalex Powder / Safe Acid Powder |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 |
| Fax | +91 22 2781 1318 |
| mail@rxmarine.com |
|
Chemical Name |
Concentration |
CAS Number |
EC Number |
R Phrases* |
Symbols |
|
Proprietory Blend of Acid |
60-100 |
5329-14-6 |
226-218-8 |
36/38, 52/53 |
x |
| Mixture of Corrosion Inhibitor | 2-3 | --- | --- | --- | --- |
|
Non classified ingredients |
1-10 |
--- |
--- |
--- |
--- |
*See Section 16
|
Odour |
Characteristic odour |
|
Appearance |
Crystals, orange, soluble in water |
|
Contact with eyes |
Causes severe irritation |
|
Contact with skin |
In cases of severe exposure, irritation may develop |
|
Inhalation |
Irritating to respiratory system (R37) |
|
Ingestion |
The ingestion of significant quantities may cause burning sensation |
Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment (R52/53
|
Contact with skin |
Wash affected area with plenty of soap and water Contaminated clothing should be laundered before reuse Seek medical attention if irritation persists |
|
Contact with eyes |
If substance has got into eyes, immediately wash out with plenty of water for at least 15 minutes.Irrigate eyes thoroughly whilst lifting eyelids Obtain immediate medical attention |
|
Ingestion |
Do not induce vomiting Never give anything by mouth to an unconscious person Give water or milk to drink Obtain immediate medical attention. |
|
Inhalation |
Inhalation is unlikely to occur Remove patient to fresh air. |
|
Revision:31.12.2008 |
When in doubt or symptoms persist, seek medical attention. |
|
General |
In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) (S45) |
- Non-combustible solid
- Smoke from fires is irritating
- Not flammable. In case of fire use extinguishing media appropriate to surrounding conditions
- Prevent run off water from entering drains if possible
|
Personal Precautions |
Wear protective clothing as per section 8. |
|
Environmental Precautions |
Do not allow to enter public sewers and watercourses. |
|
Clean Up Actions |
Sweep or shovel-up spillage and remove to a Wash spill site with water and detergent. |
|
Special Precautions |
Wear protective clothing as per section 8. |
|
Handling |
Wear protective clothing as per section 8 In use, may form flammable/explosive vapour-air mixture (R18) Ensure adequate ventilation Avoid contact with skin and eyes (S24/25) Eyewash bottles should be available. |
|
Storage |
Keep only in the original container in a cool, well ventilated place (S3/9/49) Keep in acid store. |
|
Exposure Limits |
There are no recommended or established controls for this product. |
|
Exposure controls |
No special precautions are required for this product. |
|
Occupational exposure controls |
Wear suitable protective clothing, including eye/face protection and gloves (plastic or rubber are recommended) Wear suitable dustmask e.g.to BS 2091. |
|
Odour |
Characteristic odour |
|
Appearance |
Crystals, orange, soluble in water |
|
pH |
1 at 10 % Concentration |
|
Boiling point |
Not applicable |
|
Vapour pressure |
Not known |
|
Melting point |
205 °C at 760 mm /Hg |
|
Water solubility |
~ 200 g/l |
|
Density |
1200 kg/m3 |
|
Non-combustible solid |
|
- This article is considered stable under normal conditions, In use, may form flammable/explosive vapour-air mixture (R18), Reaction products may include hydrogen
- Avoid overheating
- Incompatible with alkalis (strong bases)
- Contact with nitrite (e.g. Diesel DEWT Guard NB NB, ROCCORRX NB Liquid) liberates toxic gas.
|
Toxicological information |
LD50 (oral,rat) 3160 mg/kg. |
|
Inhalation |
May cause severe irritation May cause shortness of breath. |
|
Contact with skin |
May cause irritation. |
|
Contact with eyes |
Causes severe irritation. |
|
Ingestion |
The ingestion of significant quantities may cause burning sensation. |
|
Carcinogenicity |
No evidence of carcinogenic effects. |
|
Ecotoxicity |
Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment (R52/53). |
|
Mobility |
Completely soluble in water. |
|
Persistence and Biodegradability |
Most components in this product are not readily biodegradable. |
|
Bioaccumulation Potential |
Bioaccumulation of the components in this product is insignificant. |
|
Other Adverse Effects |
No environmental problems are expected when the product is used / handled correctly.In its intended use, the product will not be released into the environment. |
|
Classification |
EU Waste class: 06.01 This material and/or its container must be disposed of as hazardous waste. |
|
Disposal considerations |
Do not discharge into drains or the environment, dispose to an authorised waste collection point Disposal should be in accordance with local, state or national legislation. |
| Proper Shipping Name | ||||
| UN | ||||
| Proper Shipping Name |
Sulphamic acid, mixture |
|||
| UN NO |
2967 |
|||
| Hazard Class | 8 | Packing Group | III | |
| Road/Rail (ADR/RID) | ||||
| Proper Shipping Name |
Sulphamic acid, mixture |
|||
| ADR UN No |
2967 |
|||
| ADR Hazard Class | 8 | Termcard |
80GC2-III |
|
| Sear (IMDG) | ||||
| Proper Shipping Name |
Sulphamic acid, mixture |
|||
| IMDG UN No |
2967 |
|||
| IMDG Hazard Class | 8 | IMDG Pack Group | III | |
| IMDG EmS | F-A, S-B | IMDG subrisk | N/A | |
| IMDG Labels | 8 | IMDG Flashpoint | N/A | |
|
Air(ICAO/IATA) |
||||
| Proper Shipping Name |
Sulphamic acid, mixture |
|||
| ICAO UnNo |
2967 |
|||
| ICAO HazardClass | 8 | ICAO Packing Group | III | |
| ICAO subrisk |
N/A |
ICAO Labels | 8 | |
| ICAO Flashpoint |
N/A |
|||
| DOT/CFR (US Department of Transportation | ||||
| DOTProper Shipping Name |
Sulphamic acid, mixture |
|||
| Hazardous Material | Sulphamic acid | |||
| Hazard Class | 8 | Identification Number |
UN2967 |
|
| Product RQ (lbs) | NE | DOT subrisk |
N/A |
|
| DOT Labels | 8 | DOT Flashpoint | N/A | |
|
Risk Phrases |
Irritating to eyes and skin (R36/38) Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment (R52/53) |
|
Safety Phrases |
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice (S26) After contact with skin, wash immediately with plenty of soap and water (S28) Wear suitable gloves and eye/face protection (S37/39) Avoid release to the environment. Refer to special instructions/Safety data sheets (S61) |
Text of R and S phrase codes used in this safety data sheet:- R36/38: Irritating to eyes and skin; R52/53: Harmfulto aquatic organisms, may cause long-term adverse effects in the aquatic environment.The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents.The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in termsof safety requirements and does not signify any warranty with regard to the product's propertiesThe data given here only applies when product used for proper a pplication(s)The product is not sold as suitable for other applications - usage in such may cause risks not mentioned in this s heet.Do not use for other application(s) without seeking advice from manufacturer
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.