Functions Complete removal of dirt, oil, carbonized grease, heavy oil, gum , vegetable oil , Lube oil, soot , asphalt , carbon stains etc. Gives clear finish to the surface. RXSOL-19-1421-025 is a unique formulation blended from inorganic, organic Compound and solvent with powerful dispersing agent .Readily soluble in water in all proportions.RXSOL-10-1005-210 is non- corrosive to metal like copper, aluminium, Mild steel, and plastic.It is non toxic which makes handling easy.
Advantages: RXSOL-19-1421-025 is easily soluble in water Action is quite fast even at low temperature which gives advantages of cleaning under operation And avoid shut down and down time. Non corrosive to most of the metals / plastics. Gives clear finish to the surface.
Lower cost due to high concentration
Fields of Application: Treated for the really tough daily cleaning problems faced in the proper Maintenance of Industrial and Institutional physical plants. Can be used as a stripper for all types of waxes and finishes and as a Degreaser where regular cleaners will not perform. May be brushed on , sprayed or used in a dip tank . Excellent for use as a wash for fuel tankers & as a liquid steam jenny compound.
Caution : Although RXSOL-19-1421-025 is non toxic &non irritant avoid skin or eye.Contact. If contact occurs wash with ample quantity of water
Proedure Of Use :
1st Method : Mix 1 part of RXSOL-19-1421-025 with 2 -10 parts of water / GAS-OIL , For heavy oil,greasy surface use directly)Spray directly on the entire surface to be cleaned. This can be achieved by Hand spray / mechanical spray pump. Immediately after 2 -5 minute of spray the RXSOL-19-1421-025 starts its function. The Dirt, oil grease etc will loosen. 5 to 6 minutes after spraying start rinsing the system with water (High pressure recommended). Dirt and mud starts vanishing with cleaning media and water.
2nd Method: Application in immersion process with or without ultrasonic support, manual wipping.
3rd Method: RXSOL-19-1421-025 is also used in conjunction with alkaline degreasing bath at 3-5% (v/v) concentration for better and quick degreasing action. Eithers the bath is heated to be 70c or the solution can be stirred or air agitated.
Chemical Tank Cleaning
FOR TANK CLEANING
RECOMMENDATION : 0.2% TO 100%
Procedure for Use :-
- RXSOL-19-1421-025 is highly concentrate
- Dilute in water as per surface deposition.
- Diluted materials apply on rusted area for 15 to 20 minutes then wash off with water repeat if necessary. For stubborn rusted stains.)
NOTE :-
RXSOL-19-1421-025 should be applied at full concentration for heavy stains, or diluted to 20-50% for light stains. Allow to soak for 15 to 30 minutes and wash off with water. A second application may be necessary to remove the stubborn stains.
Spraying Direction :-
Using an empty / clean 210 liter drum, fill with 190 liter of fresh water and add 20 liters of RXSOL-19-1421-025 This makes a 10% solution, which can be sprayed onto areas. Once spraying is completed, wait 20-30 minutes and fresh water rinse with lots of water, if possible use butterworth machines for a more efficient result. This method can be used in stainless tanks to “freshen up” the look of the stainless materials. Make sure to rinse the tank very well, as residual detergent within the RXSOL-19-1421-025 will show up in a Wall Wash.
Injection – Not suitable.
Re-circulation :–
When hand spraying is inadequate (too much area to cover), prepare a 2% - 5% solution in the tank using fresh water, heat solution to 50o C, then circulate the solution through butterworth machines for 3 x 45 minutes drops minimum. When using fixed machine recirculate for a minimum of 3 cycles. Rinse out the tank using hot seawater 85o C for 2 hours making sure that there is no form remaining in the water at the pumpstack drain cock. After the hot wash, the tank must be rinsed with fresh water and dried.
* Use a strainer at the pumpstack when circulating any solution.
Tank Lining – Stainless / Epoxy, Phenolic
| APPEARANCE | Clear brown liquid | |
| Active Matter | 100% | |
| Emulsifying Property | Good for emulsification of Oils , Gum , Wax, Greases , Polymer & Solvents , | |
| COMPATIBILITY | ||
| Metal | No known effect | |
| Rubber | May swell | |
| Synthetic rubber | May swell | |
| Wetting Property | Good Wetting & Emulsifying Property | |
| PACKAGING | Order No: RXSOL-19-1421-025 |
Size (in litres) 25 / 30 / 210 |
Due to its equal balance of hydrophobic and hydrophilic characteristic in RXSOL ORG3, this product is highly suiable for industrial cleaners, rust removers, hard surface cleaners, and also can be used as disinfectants. Popular and very versatile cleaning product.

| Product Name | RXSOL ORG 3 Powerful Cleaner |
| Part Number | RXSOL-19-1421-025 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Kolkata, Chennai, Visakhapatnam, Fujairah, Muscat, Canada. Nairobi
| Phone | + 91 22 20871200 - 1400 |
| Fax | +91 22 27670900 :0091 9821214367 |
| mail@rxmarine.com |

|
Chemical Name |
Concentration |
CAS Number |
EC Number |
R Phrases* |
Symbols |
|
Naphtha (petroleum)hydrosulfurized heavy |
30-60 |
64742-82-1 |
265-185-4 |
65, 66 |
Xn |
|
White spirit (low aromatic) |
30-60 |
64742-48-9 |
265-150-3 |
65, 66 |
Xn |
|
Fatty alcohol ethoxylate |
5-10 |
34398-01-1 |
500-084-3 |
41 |
41 |

|
Environmental Hazards |
None. |
|
Human Health Hazards |
Moderates , may cause lung damage if swallowed. |
|
Note |
Person-related safety precautions required. |

|
After inhalation |
On Inhalation move to fresh air / Arificial respiration Get medical attention in case of symptoms . |
|
After skin contact |
Instantly wash with water and soap and rinse thoroughly. Generally Non Irritating , Protective clothing require |
|
After eye contact |
Rinse opened eye for several minutes under running water. If symptoms persist, consult doctor. |
|
After swallowing ( On persistent symptoms ) |
Harmful, if ingested,Do not induce Vomiting. Get medical attention. |

|
Extinguishing Media:- |
|
|
A. Suitable |
Foam ,dry Co2, water spray |
|
B. Not suitable |
Not applicable |
|
C. Special |
Not applicable |
|
Cool endangered container with water |
Direct water jet on larger fire |
|
Protection of fire Fighter |
Masked with Air Respirator |

Care for environmental protection:Prevent material from reaching sewage system, holes and cellars. Dilute with much water. PROCEDURE for cleaning/collecting:Remove RXSOL SC 2002 with absorbent materials or mechanically .And dispose accordance with section , Then flush with water and ventilate well. NOTE : Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust , oil adsorbent).

|
Ensure adequate ventilation:- |
|
|
Handling |
Eyewash facilities require at workplace. |
|
Storage |
General Storage , container should be tightly. Protect from direct sunlight and heat flames. |
|
Methods of cleaning |
Flush Spill Area with Water. |
|
Note |
Keep Container Tightly Closed. |

|
ENVIROMENTAL PRECAUTION |
|
|
Readily Bio-Degradable , missible with water , low toxicity , No environmental problem on correctly usage. |
|
|
PERSONAL PROTECTION |
|
|
Respiratory System Protection |
Breathing equipment Not required |
|
Eye Protection |
wear eye protection (on possibility of contact) |
|
Note |
The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace. |
|
Wash hands during breaks and at the end of the work. Avoid contact with the eyes and skin. Keep away from foodstuffs, beverages and food |
|
|
Protection of hand |
Protective gloves , wash hand after touch. |
|
Eye protection |
Tightly sealed safety glasses |

Product Properties:-
|
Appearance |
Clear liquid / Low viscous |
|
|
Odour |
Characteristic / Odorless |
|
|
Density |
In g/cm3 at 15°C: 0.90-0/95 |
NOTE : SHELF LIFE 5 YARS |
|
Boiling Point |
Materials Boils At 160°C |
EFFICIENCY: |
|
Compatibility |
|
A . SEA WATER 70% |
|
Metal |
No known effect |
B. FRESH WATER 84% |
|
pH |
6 +0.5 |
|

|
Condition to Avoid |
Heat, Flame & Other Sources of Ignition |
|
Materials to Avoid |
Do not subject to Reducing /Oxidizing Agents. |
|
Hazardous Decomposition Products |
Do not occur |
|
Note |
No decomposition if used according to specifications. |

|
Skin Irritation |
irritant wash with soap water |
|
Eye Irritat |
Moderate irritant , flush with copious amounts of water |
|
Sensitization |
Not Sensitizing . |
|
(All above information as per data available with us) |
|

|
Comment |
Not applicable |
|
Ecotoxicity |
Not applicable , Readily biodegradable |
|
Water hazard class 2 (self-assessment) |
Hazardous for water. |
|
Do not allow product to reach ground water, water bodies or sewage system. Danger to drinking water if even small quantities leak into soil. |
|

This material must be disposed with local national regulations.Product Recommendation ( Recommended cleaning agent : water ) Can be burnt under adherence to the necessary technical regulations. Disposal must be made according to official regulations. Can be reused or recycled after cleaning

• Marine pollutant: No
• Transport/Additional information

• Hazard designation of product: Xi Irritant.
• Irritating to eyes and skin.
• Safety phrases
Keep out reach of children
If swallowed, seek medical attention immediately
Harmful if swallowed
In case of contact with eyes, rinse immediately with plenty of water and
seek medical attention.
Do not Breathe
After contact with skin, wash immediately with plenty of water and soap and rinse thoroughly.
Risk of serious damage to eyes
• National regulations

These data are based on our present knowledge. However, they shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.Department issuing data specification sheet Environment protection department.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.