Bio degradable NON Hazardous Rust Remover , Its Rust removal solution is safe and non flamable so even it can be ship by air . Rust Remover is a neutral pH oxidation remover designed for use on steels, iron, aluminum and copper metals. The solution is best used in a heated immersion or spray application.
Removal of rust on iron and steel, Brightens aluminum and copper, Can be used in dip or immersion tanks and pressure washers.
Rust Remover is a concentrated aqueous solution designed to remove rust and oxidation safely and economically.
Rust Remover easily works in the nooks and crannies and all other wetted areas, eliminating the need for mechanical removal. Rust Remover can be used over and over to dissolve rust in solution.
Rust Remover can be use by bath process by Immersion Tanks Neat to 10:1 And also can be use by Pressure Wash 10:1
Rust Remover save the need for time- consuming sanding and grinding operations, where labor required with these operations.
DIRECTIONS FOR USE
D-Rust-It Rust Remover can be used in many rust (oxidation) operations. Use the table below as a guide:
D-Rust-It Rust Remover can operate at temperatures from ambient to 160° F, but works best at elevated temperatures (120° F to 160° F). Increasing the temperature decreases the amount of time to remove oxidation, especially on heavily rusted metals.
|
Product Name |
Rust Remover Safe |
|
Product Type |
RXSOL-18-1015-025 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla - Gandhidham, Chennai, Visakhapatnam, Kolkata, Fujairah, Muscat Oman, Uganda
| Phone | +91 22 27815541 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9322594669 |
| mail@rxmarine.com |
| CHEMICAL ENTITY | CAS NO. | PROPORTION |
| Ingredients determined to be non-hazardous | ------- | ------ |
Based on available information, this material is not classified as hazardous according to criteria of Safe
If poisoning occurs, contact a doctor or Poisons Information Centre
Inhalation:
Remove victim from exposure - avoid becoming a casualty. Remove contaminated clothing and loosen remaining clothing. Allow patient to assume most comfortable position and keep warm. Keep at rest until fully recovered. Seek medical advice if effects persist.
Skin contact:
If skin or hair contact occurs, remove contaminated clothing and flush skin and hair with running water. If swelling, redness, blistering or irritation occurs seek medical assistance.
Eye contact:
If in eyes wash out immediately with water. In all cases of eye contamination it is a sensible precaution to seek medical advice.
Ingestion:
Rinse mouth with water. If swallowed, do NOT induce vomiting. Give a glass of water to drink.Never give anything by the mouth to an unconscious patient. If vomiting occurs give further water. Seek medical advice.
Notes to physician:
Treat symptomatically.
| Specific hazards: | Non-combustible material. |
| Fire fighting further advice: | Not combustible, however following evaporation of aqueous component residual material can burn if ignited. On burning may emit toxic fumes. Fire fighters to wear self-contained breathing apparatus and suitable protective clothing if risk of exposure to vapour or products of combustion. |
| Hazchem Code: | Not applicable. |
| Suitable extinguishing media: | Not combustible, however, if material is involved in a fire use water fog (or if unavailable fine water spray), foam, dry agent (carbon dioxide, dry chemical powder). |
SMALL SPILLS:
Wear protective equipment to prevent skin and eye contamination. Avoid inhalation of vapours. Wipe up with absorbent (clean rag or paper towels). Allow absorbent to dry before disposing with normal household garbage.
LARGE SPILLS:
Clear area of all unprotected personnel. Slippery when spilt. Avoid accidents, clean up immediately. Wear protective equipment to prevent skin and eye contamination and the inhalation of vapours. Work up wind or increase ventilation. Contain - prevent run off into drains and waterways. Use absorbent (soil, sand or other inert material). Collect and seal in properly labelled containers or drums for disposal. If contamination of sewers or waterways has occurred advise local emergency services.
Dangerous Goods :
Initial Emergency Response Guide No: Not applicable.
Handling:
Avoid eye contact and repeated or prolonged skin contact.
Storage:
Store in a cool, dry, well-ventilated place and out of direct sunlight. Store away from incompatible materials described in Section 10. Keep containers closed when not in use - check regularly for leaks.
National occupational exposure limits:
No value assigned for this specific material by Safe Work.
Biological Limit Values: As per the “National Model Regulations for the Control of Workplace Hazardous Substances the ingredients in this material do not have a Biological Limit Allocated.
Engineering measures:
Natural ventilation should be adequate under normal use conditions. Keep containers closed when not in use.
Personal protection equipment:
OVERALLS, SAFETY SHOES, SAFETY GLASSES, GLOVES.
Wear overalls, safety glasses and impervious gloves. Available information suggests that gloves made from nitrile rubber should be suitable for intermittent contact. However, due to variations in glove construction and local conditions, the user should make a final assessment. Always wash hands before smoking, eating,drinking or using the toilet. Wash contaminated clothing and other protective equipment before storing or reusing.
Information on basic physical and chemical properties:
| Form / Colour / Odour: | Clear to light rust coloured liquid, slight odour. |
| Solubility: | Miscible with water |
| Specific Gravity (20 °C): | 1.03 |
| Relative Vapour Density (air=1): | N Av |
| Vapour Pressure (20 °C): | N Av |
| Flash Point (°C): | N App |
| Flammability Limits (%): | N App |
| Autoignition Temperature (°C): | N Av |
| Boiling Point/Range (°C): | 100 |
| pH: | 6.0 |
| Viscosity: | N Av |
| Total VOC (g/Litre): | N Av |
| Chemical stability: | This material is thermally stable when stored and used as directed. |
| Conditions to avoid: | Elevated temperatures and sources of ignition. |
| Incompatible Materials: | Oxidising agents. |
| Hazardous decomposition products: | Oxides of carbon and nitrogen, smoke and other toxic fumes. |
| Hazardous reactions: | No known hazardous reactions. |
No adverse health effects expected if the product is handled in accordance with this Safety Data Sheet and the product label. Symptoms or effects that may arise if the product is mishandled and overexposure occurs are:
Acute Effects:
Inhalation:
Material may be irritant to mucous membranes and respiratory tract.
Skin contact:
Contact with skin may result in irritation.
Eye contact:
May be an eye irritant.
Avoid contaminating waterways.
Ecotoxicity:
No information available.
Persistence and degradability:
No information available.
Mobility:
No information available.
Refer to State/Territory Land Waste Management Authority.
ROAD AND RAIL TRANSPORT:
Not classified as Dangerous Goods
MARINE TRANSPORT:
Not classified as Dangerous Goods by the criteria of the International Maritime Dangerous Goods Code
(IMDG Code) for transport by sea.
AIR TRANSPORT:
Not classified as Dangerous Goods by the criteria of the International Air Transport Association (IATA)
Dangerous Goods Regulations for transport by air.
Poisons Schedule (Aust):
Not applicable
All the constituents of this material are listed on the Australian Inventory of Chemical Substances (AICS).
The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications usage in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from manufacturer.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.