Rust Remover For Metal or Concrete De Rust-20

This product is used to soften and dissolve rust from machinery, equipment, sheet iron, carpets, bridges, pipes, concrete, metal parts, automobiles.

Concentrated Rust Remover with detergent action helps to remove grease and oils which may have accumulated on the metal surface. Phosphatizing offers a very conducive surface for metals which are to be painted following the removal of rust. An excellent prep treatment and binder for metal surfaces to be painted. Maybe water diluted for lighter work.

Application

This concentrated blend of inorganic acids, wetting agents, detergents and water softeners is specifically designed for the rapid removal of rust, while providing the phosphatized ferrous metal surface. The detergent action helps to remove grease and oils which may have accumulated on the metal surface. Phosphatizing offers a very conducive surface for metals which are to be painted following the removal of rust. An excellent prep treatment and binder for metal surfaces to be painted. May be water diluted for lighter work.

Used in:-

This product is used to soften and dissolve rust from: machinery, equipment, sheet iron, carpets, bridges, pipes, concrete, metal parts, automobiles.

Dose
For rust removal: Dilute concentrate with water at a rate of 1 part concentrate to up to 3 parts water.  The solution may be applied by soaking, brushing, or spraying onto surfaces. Treatment time will vary depending upon the extent of the rust to be removed. Usually, the process may be accomplished within 30 minutes, but the solution may remain on the surface for longer periods if required. Often it may be necessary to make a second application if rusting is extensive. Do not rinse. As a phosphatizing and rust preventative treatment: Dilute concentrate with water at a rate of 1 part concentrate to up to 30 parts water. Apply to the surface by spraying, brushing, or soaking. Allow solution to air dry, do not rinse.
Technical specifications

Note

Used in:-This product is used to soften and dissolve rust from machinery, equipment, sheet iron, carpets, bridges, pipes, concrete, metal parts, automobiles.

Remarks / Precaution

Packing sizes
500 ml, 1 Ltr, 5, 10, 20, 25, 50, 210 Ltrs . This product effectively neutralizes rust to get easily removed. Rust Remover not only clean the rusted surface but also chemically treat metal surface for further rusting.
MSDS

Product Name RXSOL-17-1073
Product Type Rust Remover For Metal or Concrete ( De Rust - 20)

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Phone +91 22 65113333 / 5555 / 9999 / 27611360
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email mail@rxmarine.com

Chemical Name

CAS Number

SARA-III LIST

OSHA PEL
(ppm)

ACGIH
TLV (ppm)

Carcinogen
Ref. Source

ETHYLENEGLY COLMONOBUT YLETHER 111-76-2 Yes 25 25 d
PHOS PHORIC ACID 7664-38-2 Yes 1mg/m3 1mg/m3 d
AMMONIUM BIFLUORIDE ( EXP . L IMITSFORFLUORIDEAS DUST ) 1341-49-7 No N/E N/E d
           

 

 

Appearance

Clear to slightly hazy viscous pink liquid

Odour

 characteristic odor.

Contact with eyes

May cause burns.

Contact with skin

May cause severe irritation & fluoride burns, which may not be
immediately evident.

Inhalation

May cause severe irritation to upper respiratory tract. Not likely to be a problem under normal conditions of handling and use.

Ingestion

May cause systemic toxic ef fects as wel l as t issue damage to GI t ract .

 

Eye Contact:

Flush (including under lids) with water for 30 minutes. Get medical attention.

Skin Contact:

Flush with cold water for at least 15 minutes. Use alkaline soap. If irritation occurs, get medical attention

Ingestion

DO NOT INDUCE VOMI T ING. Drink large quantity of water. Get immediate medical attention.

Inhalation

Remove to fresh air. If breathing is difficult, give oxygen. Get medical attention.

-  FLASH POINT AND METHOD USED:-Non-combustible
- EXTINGUISHER MEDIA:-Non-combustible. Use media appropriate to surrounding fire.
- SPECIAL FIRE FIGHTING PROCEDURE S : Self-contained breathing apparatus.

Respiratory Protection ( specify type) :

 Not generally needed under normal conditions of handling and use.

Protective Gloves :

Neoprene or PVC.

Eye Protection:

Chemical goggles.

Other Protective Clothing & Equipment :

Eyewash stat ions & safety showers.

Hygienic WorkPractices :

Avoid contact with skin and avoid breathing vapors.

Ventilation Requirements :

Special ventilation is not generally needed under normal conditions of handling & use.

Steps To Be Taken If Material Is Spilled Or Released:

Contain spill. Do not contaminate sewers, ground or surface waters. Neutralize with soda ash or lime. Soak up in inert absorbent. Place in sealed, leak-proof, properly labeled containers.

Waste Disposal Methods: Dispose of in accordance with all local, state and federal regulations.

Storage

Store in original container. Keep container sealed when not in use. Shelf life one year. Protect from extreme heat or cold.
Other Precautios &  / or Special Hazar s : KEEP OUT OF REACH OF CHILDREN

FLASH POINT AND

METHOD USED
 

Non-combustible

EXTINGUISHER MEDIA:
 

combustible. Use media appropriate to surrounding fire.

SPCIAL FIRE FIGHTING PROCEDURES :

Self-contained breathing apparatus.

 

Appearance:

Clear to slightly hazy viscous pink liquid

Odor

 characteristic odor.

Boiling Point:

100ºC

Vapor Pressure:

N/A

Vapor Density (Air = 1): N/D

Solubility in Water:

Miscible

Specific Gravity (H2O=1):

1.100-1.250

Evaporation Rate

1

Water Reactive:

No

Incompatibility (Mat. to avoid)(Mat. to avoid): Bases, metals, glasses, carbides, acetylides, phosphides, silicides.
Conditions to Avoid: Contact with strong bases can cause violent reaction generating large amounts of heat.
  

Toxicological information

No experimental data available.

Inhalation

May cause severe irritation to upper respiratory tract. Not likely to be a problem under normal conditions of handling and use.

Contact with skin

May cause severe irritation & fluoride burns, which may not be
immediately evident.

Contact with eyes

May cause burns.

CHRONIC EFFECTS:

Dermat i t is or secondary ef fects of burns, chronic over -exposure may cause tooth erosion, chronic cough.

Ingestion

May cause systemic toxic ef fects as wel l as t issue damage to GI t ract .
Medical Conditions General ly Ag gravated by Exposure  Asthma and condi tions af fect ing above systems and others

   
   
   
   
   

   
   

-

   
   

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Need a quote for this product?

Tell us the grade, packing and quantity you need — we ship across India and to major ports.

Request a quote office@kolkatachemical.com