Rust and Metal Tarnish Remover Specially designed for removal of rust from any steel surface area also acts as rust proofing agent before the application of paint or coatings. It is non-flammable. Prevents further rusting.
Category
It is a heavy duty and concentrated liquid blend of Acidic surfactants organic compounds containing rust penetrating agents, solubilizer and inhibitors. Acts as rustproofing agent before the application of paint or coatings. It is non-flammable. Prevents further rusting.
Application
Metal Clean Britte is Cargo hold and Tank cleaning chemicals. Which is also useful products for Deck and maintenance cleaning and rust removing.
Before application of Metal Clean Britte, we have to understand its cleaning principal...
In general terms and thumb rule for Metals Britte is MORE RUST required more Metals Britte. Chemically Rust { iron oxide (FeO) } is soluble in pH values below 4.0, . Thus, the oxide (oxygen) dissolves as it is formed instead of depositing on the metal's surface. So it is clear more rust required more Metal clean Britte to get dissolve. In practical if the area is fully rusted corroded then direct Metal Clean Britte can be used to dissolve rust particles, while in light contaminated part Metals Clean Britte can be diluted in between 20 to 70% .
HINTS : MORE RUST required MORE METAL CLEAN RUST DISSOLVING SOLUTION, So before uses try to remove loose RUST PARTICLE, This trick will save lot of CHEMICAL USE.
HINTS : MORE RUST required MORE METAL CLEAN RUST DISSOLVING SOLUTION, So before uses try to remove loose RUST PARTICLE, This trick will save lot of CHEMICAL USE.
2nd factor is the time which is directly affecting the cleaning result. If base metal is Aluminium then use Metals Clean Britte concentration 10 to 30% for not more then 5 Minutes. For removal of rust stains on painted or iron surfaces, use 10-30% of Metals Clean Britte soultion for 15-20 minutes. And for heavily rusted and corroded or soiled surfaces and tarnish on copper and brass, use a solution of 20-50%, for 15-40 minutes.
The 3rd important point always be noted, After cleaning of rust from Metals clean Britte all area should be fully rinsed and clean properly with fresh water. And for best long time result to keep rust free surface, Surface can be chemically neutralized with RXSOL-41-8896-025 ( dilution ration 1 Ltr RXSOL-41-8896-025 with 10 Ltr water ). The scientific reason behind that is As With the Rust oxide gone with Metals Clean Britte, the metal surface is in direct contact with the acidic solution, and the corrosion reaction proceeds at a greater rate than it does at higher pH values. For increasing pH values greater than pH 10, the rusting rate seems to fall as pH is increased with help of RXSOL-41-8896-025.(http://www.rxmarine.com/Professional-Heavy-Duty-Alkaline-Cleaner)
Dose
PROPERTIES
Blend of phosphoric acid in solution and surfactants.
ADR Class : 8
Kemler : 80
UN No. : 3264
Packing Group : III
IMDG Class : 8
Packing :25Ltrs
R34 : Causes burns
R36/38 : Irritating to eyes and skin.
S26 : In case of contact with eyes wash promptly with plenty of water and seek medical advice.
S28 : In case of contact with skin, rinse immediately with plenty of water.
Note
Metal Clean Britte is Cargo hold and Tank cleaning chemicals. Which is also useful products for Deck and maintenance cleaning and rust removing.
Before application of Metal Clean Britte, we have to understand its cleaning principal...
In general terms and thumb rule for Metals Britte is MORE RUST required more Metals Britte. Chemically Rust { iron oxide (FeO) } is soluble in pH values below 4.0, . Thus, the oxide (oxygen) dissolves as it is formed instead of depositing on the metal's surface. So it is clear more rust required more Metal clean Britte to get dissolve. In practical if the area is fully rusted corroded then direct Metal Clean Britte can be used to dissolve rust particles, while in light contaminated part Metals Clean Britte can be diluted in between 20 to 70% .
HINTS : MORE RUST required MORE METAL CLEAN RUST DISSOLVING SOLUTION, So before uses try to remove loose RUST PARTICLE, This trick will save lot of CHEMICAL USE.
HINTS : MORE RUST required MORE METAL CLEAN RUST DISSOLVING SOLUTION, So before uses try to remove loose RUST PARTICLE, This trick will save lot of CHEMICAL USE.
2nd factor is the time which is directly affecting the cleaning result. If base metal is Aluminium then use Metals Clean Britte concentration 10 to 30% for not more then 5 Minutes. For removal of rust stains on painted or iron surfaces, use 10-30% of Metals Clean Britte soultion for 15-20 minutes. And for heavily rusted and corroded or soiled surfaces and tarnish on copper and brass, use a solution of 20-50%, for 15-40 minutes.
The 3rd important point always be noted, After cleaning of rust from Metals clean Britte all area should be fully rinsed and clean properly with fresh water. And for best long time result to keep rust free surface, Surface can be chemically neutralized with RXSOL-41-8896-025 ( dilution ration 1 Ltr RXSOL-41-8896-025 with 10 Ltr water ). The scientific reason behind that is As With the Rust oxide gone with Metals Clean Britte, the metal surface is in direct contact with the acidic solution, and the corrosion reaction proceeds at a greater rate than it does at higher pH values. For increasing pH values greater than pH 10, the rusting rate seems to fall as pH is increased with help of RXSOL-41-8896-025.(http://www.rxmarine.com/Professional-Heavy-Duty-Alkaline-Cleaner)
MSDS
| Porduct Name | METALBRITE |
| Part Number | RXSOL-25-1011-010 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA
| Phone | +91 22 20871200 - 1400 |
| Fax | +91 22 27612100 :::AOH :0091 9821214367 |
| mail@rxmarine.com | |
| Website | www.rxmraine.com |
| Name | % by Wt | CAS Number |
| Phosphoric Acid | >60% | 7664-38-2 |
| Non Ionic Surfactant | 10% | 9016-45-9 |
| Water | Balance | 7732-18-5 |
|
HSNO Classes: 6.1D(Oral), 6.1E(Dermal),8.1A, 8.2C,8.3A,9.1D,9.3C |
|
| HSNO Approval Number: Group Standard HSR002526 | |
| Cleaning Products (Corrosive) Group Standard 2006 |
Prevention Statements:
| Keep out of reach of children | |
| Read label before use. | |
| Wash hands thoroughly after handling | |
| Wear protective gloves and eye/face protection. | |
| Keep only in original container. | |
| Do not eat, drink or smoke when using this product. | |
| Do not breathe fume/gas/mist/vapours/spray. |
Response Statements
| If medical advice is needed, have product container or label at hand. | |
| Absorb spillage to prevent material damage | |
| IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. | |
|
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin
with water/shower.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin
with water/shower.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin
with water/shower.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin
with water/shower.
|
|
| Wash contaminated clothing before reuse. | |
| IF INHALED: Remove to fresh air and keep at rest in a position comfortable for breathing. | |
| Immediately call a POISON CENTER or doctor/physician. | |
| IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. |
Storage Statements
| Store in corrosive resistant container with a resistant inner line. | |
| Store locked up. |
| Eyes | If medical advice is needed, have product container or label at hand. Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/physician. |
| Skin |
Remove/Take off immediately all contaminated clothing. Rinse skin
with water/shower. Wash contaminated clothing before reuse
|
| Ingestion | Rinse mouth. Do NOT induce vomiting. Call a POISON CENTER or doctor/physician if you feel unwell |
| Inhalation | Remove to fresh air and keep at rest in a position comfortable for breathing. |
For Further Information Telephone (24 Hours)The National Poison Centre: 0800 Poison [764 766]
| Flash Point | Not available |
| Auto ignition Temperature | Not available |
| Flammable Limits in Air % by Volume: | Not available |
| Extinguishing Media | Water spray or fog, Dry Chemical Powder, Foam or Carbon Dioxide |
| Fire Fighting Instructions | |
| Unusual Fire and Explosion Hazards | Not available |
| If product is released or spilled: Neutralise with dilute alkali (soda ash or slaked lime) & then flush away with copious amounts of running water. Do not release into waterways. |
|
Handling Storage |
Store locked up. Store in original container. Protect from physicaldamage. Clean up all spills immediately to prevent secondary accidents. |
| Engineering Controls: | Normal ventilation |
| Eye / Face Protection | Safety Glasses/Full face mask |
| Body Protection: | Overall |
| Respiratory Protection | |
| Exposure Limits | Not available |
| Appearance | Clear Liquid |
| Odour | Acidic |
| pH | 4.0 – 5.0 |
| Solubility | Complete |
| Vapour Density | Not available |
| Boiling Point | >100 Deg C |
| Freezing Point | Not available |
| Ignition Point | Not available |
| Flash Point | Not available |
| Specific Gravity | 1.50 |
| Stability of the Substance | Stable under normal conditions |
| Conditions to avoid | |
| Materials to avoid | Alkali, Oxidising agents |
|
Hazardous Decomposition
Products
|
Thermal decomposition may result in fumes of phosgene and chlorides |
|
Conditions Contributing to
Hazardous Polymerization
|
Not available
|
| Inhalation | Not available |
| Ingestion | SPECIES: Rat ;ENDPOINT: LD50 ;VALUE: 1530 mg/kg |
| Skin | SPECIES: Rabbit ;RESULT: Corrosive. |
| Eye | SPECIES: Rabbit; RESULT: Severely irritating. |
| Environmental Precautions . | |
| Ecological Toxicity | SPECIES: Rat; ENDPOINT: LD50;VALUE: 1530 mg/kg bw |
| Dispose through Licensed Disposal Company . |
| UN No | 3264 |
| Proper Shipping Name | CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S |
| Dangerous Goods Class | 8 |
| Packing Group | II |
| Hazchem Code | 2R |
| HSNO Approval No | HSR002526 |
| Group Standard | Cleaning Products (Corrosive) Group Standard 2006 |
| HSNO Classes | 6.1D(Oral), 6.1E(Dermal),8.1A, 8.2C,8.3A,9.1D,9.3C |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |
| No data available |
| Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. |
| Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. |