MembraneClean MC 33 Alkaline RO Cleaner is a Metal Oxide Cleaner for Foulant which is caused by heavily deposit metal oxide CaCO3, CaSO4, BaSO4,for RO Membranes. This Membarance cleaner is also very effective fo removal of Acid insoluble Deposits like calcium sulfate Phosphate and for cleaning of acid-insoluble sulfates of calcium, barium and strontium as well as calcium fluoride.
During normal operation, RO membranes can become fouled, which greatly reduces the efficiency of the system. Deposits build up on the membrane until they cause a reduction in permeate flow and loss in salt rejection. The effects of fouling can lead to poor water quality, loss in production, unscheduled downtime and membrane replacement. A regular maintenance and cleaning program can provide return on investment (ROI) results ranging from 100 to 250% by maintaining low pump output pressures and extending the membrane's life. Elements should be cleaned whenever the normalized permeate flow rate or salt rejection decreases by 10-15% or the differential pressure increases by 10-15% from the original baseline data.
MembraneClean MC 33 Alkaline RO Cleaner should be fed via a closed feed system. A closed feed system is defined as a system in which fluid is moved from a closed storage vessel into a treated media without exposure to the atmosphere except through normal venting or pressure relief devices.
Cleaning solutions should be made up with chlorine-free water to give a 2.0 - 2.5% solution of MembraneClean MC 33 Alkaline RO Cleaner. It is sometimes possible to monitor the progress of membrane cleaning by the "pick-up" of hardness salts in the cleaning solution.
Physical Properties
| Appearance | Light Yellow |
| Physical State | Liquid |
| pH | 11-13 |
| Density | 1.2-1.3 gm/cm3 |
| Boiling Point | 107 deg C |
|
Product Name |
MembraneClean MC 33 Alkaline RO Cleaner |
|
Product Type |
RXSOL-33-3307-030 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 27815540 / 41 / 42 |
| Fax | +91 22 2781 1318 |
| mail@rxmarine.com |
Stock Point : Kolkata, Kandla, Mumbai, Visakhapatnam, Chennai, Fujairah, Muscat Oman, Kenya, Canada
| Ingredients | CAS # | Wt% |
| Tetrasodium EDTA | 64-02-8 | 5-10 |
| Poly phosphate blend | ------ | 8-10 |
|
Non classified Proprietory ingredients The balances of chemical ingredients are not identified as hazardous under OSHA's Hazard Communication Rule 29 CFR 1910.1200. |
------ | 80-90 |
NA
| Eye: | Check for and remove any contact lenses. IMMEDIATELY flush eyes with running water for at least 15 minutes, keeping eyelids open. COLD water may be used. DO NOT use an eye ointment. Seek medical attention. |
| Skin: | If the chemical got onto the clothed portion of the body, remove the contaminated clothes as quickly as possible, protecting your own hands and body. Place the victim under a deluge shower. If the chemical touches the victim's exposed skin, such as the hands: Gently and thoroughly wash the contaminated skin with running water and non-abrasive soap. Be particularly careful to clean folds, crevices, creases and groin. COLD water may be used. If irritation persists, seek medical attention.Wash contaminated clothing before reusing. |
| Inhalation: | Allow the victim to rest in a well ventilated area. Seek immediate medical attention. |
| Ingestion: | DO NOT induce vomiting. Have conscious person drink several glasses of water or milk. Seek immediate medical attention. |
| Flammability: | Non-flammable. |
| Flash Points: | Not applicable |
| Flammable Limits: | Not applicable |
| HazardousCombustion Products: | Not applicable |
| Means of Extinction: | Use extinguishing media suitable for surrounding materials. |
| Special Fire Hazards: | Not available. |
NA
NA
NA
| Solubility in Water: | Soluble |
| Physical State: | Liquid |
| Appearance | Light Yellow |
| Vapor Density: | Not available. |
| Percent Volatile: | 98% (w/w) solid. |
| Evaporation Rate: | 1 compared to water |
| pH (as supplied): | 11-13 |
| Density | 1.2-1.3 g/cm3 |
NA
| Routes of Entry | Ingestion. Skin contact. Inhalation. |
| Acute Effects on Humans: | Very hazardous in case of skin contact (irritant, permeator), of eye contact (irritant), of inhalation.Corrosive to skin and eyes on contact. Liquid or spray mist may produce tissue damage particularly on mucous membranes of eyes, mouth and respiratory tract. Skin contact may produce burns. Inhalation of the spray mist may produce severe irritation of respiratory tract, characterized by coughing, choking,or shortness of breath. Inflammation of the eye is characterized by redness, watering, and itching.Skin inflammation is characterized by itching, scaling, reddening, or, occasionally, blistering. |
| Chronic Effects on Humans: | CARCINOGENIC EFFECTS: Not avai la bl e. MUTAGENIC EFFECTS: Not avai la bl e. TERATOGENIC EFFECTS: Not available. Toxicity of the product to the reproductive system: Not available. There is no known effect from chronic exposure to this product. Repeated or prolonged exposure is not known to aggravate medical condition. |
| Synergistic Materials: | Not available. |
NA
NA
NA
NA
|
The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications used in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from the manufacturer.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |