REVERSE OSMOSIS MEMBRANE CLEANER
RO membrane cleaners is specifically designed to remove iron fouling for silica. It also has effectiveness against calcium carbonate scaling. RXSOL-33-3304-025 performance can be enhanced by adding low / high ph cleaners to the cleaning solution although some minor ph correction may be necessary. It should always be used as recommended by the membrane manufacturer or equipment supplier, in respect to cleaning ph and temperature. it also contains organic dispersants that helps to break down colloidal clay deposits and imparts better efficacy to biocides by penetrating into films. it is specifically developed for removing iron, silica, metal silicates, metal oxides/hydroxides and other colloidal/particulate based foulants from ro membranes. It is also effective to remove calcium carbonate, calcium phosphate and silt.
As RXSOL-33-3304-025 is buffered, the cleaning solution will stabilise at pH 3.6.
High level of active substance.
Other Grades of Membrane cleaner :::
RXSOL-33-3322-025
RXSOL-33-3324-025
MSDS, Technical bulletine of MSDS are available on email request.
Treatment and Dosage Requirements
Cleaning solutions should be prepared with chlorine free product water to give a 4% w/w solution, or 1 kg of RXSOL-33-3304-025 to every 25kgs of water. As RXSOL-33-3304-025 is buffered the cleaning solution will stabilize at pH 3.6.
Deposition of fouling and scale directly affect the cleaning time In general practice to dissolve complete fouling 2 to 3 hours required . During chemical reaction between solution and deposition If the cleaning solution becomes brown to red in color it must be changed as the solution becomes completely non reactive.
On completion of cleaning process membrane should be clean with cupious amount of FRESH WATER till neutralisation of pH value of runing water.
For disposal of RXSOL-33-3304-025 cleaning solution should always be neutralized with alkali.
Pl. refer our Technical Bulletine and MSDS of Product.
This advanced, high strength formulation available in powder / liquid form
• pH adjusted to 3.0+ 0.5
• Highly effective at ambient temperatures
• Contains no surfactants and is quickly rinsed away
• Contains organic acids, detergent builders and chelating agents
Liquid product for ease of use
Highly concentrated
Buffered to ensure pH control
Safety Goggles, And Hand Gloves is compoulsery before using this product. And for more details pl. ask MSDS.
Membrane Cleaner RXSOL- 3304 MC3 is a low pH formulation that has been designed specifically to remove metal hydroxides, calcium carbonate and other similar scales from polyamide, polysulfone and thin film, composite membrane surfaces.
| Product Name | RXSOL-33-3304-025 |
| Product Type | RXSOL- 3304 ( Membrane Cleaner ) |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Gandhidham, Vizag, Chennai, Kolkata, Fujairah, Muscat, Nairobi Kenya, Canada
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| care@rxmarine.com |
| Chemical Name | Cas No # | Range(w/w%) |
|
NITRILOTRIACETIC ACID,TRISODIUM SALT |
5064-31-3 |
0.1-1.0 |
|
N-HYDROXY-ETHYLENEDIAMINE TRIACETIC ACID TRISODIUM salt |
139-89-9 |
15-40 |
|
MONOETHANOLAMINE |
141-43-5 | 5-9 |
| CITRIC ACID | 10-20 | |
| Proprietory Blend Mixuture of Organic and Inorganic Acid with Chelating Agent | ---- | Balanced |
| Skin contact | Primary route of exposure; Severe irritant to the skin |
| eye contact |
Severe irritant to the eyes, possibly corrosive |
| INGESTION EFFECTS |
May cause gastrointestinal irritation with possible nausea, vomiting, abdominal discomfort and diarrhea. |
|
SYMPTOMS OF EXPOSURE: |
Causes irritation of the skin, eyes, and/or respiratory system |
|
SKIN CONTACT |
Wash thoroughly with soap and water. Remove contaminated clothing.Thoroughly wash clothing before reuse. Get medical attention if irritation develops or persists |
|
EYE CONTACT |
URGENT! Immediately flush eyes with plenty of low-pressure water for at least 20 minutes while removing contact lenses. Hold eyelids apart. Get immediate medical attention. |
|
INHALATION |
If nasal, throat or lung irritation develops - remove to fresh air and get medical attention. |
|
INGESTION |
Do not feed anything by mouth to an unconscious or convulsive victim. Do not induce vomiting. Immediately contact physician. |
|
FIRE FIGHTING INSTRUCTIONS |
Fire fighters should wear positive pressure self-contained breathing apparatus |
|
EXTINGUISHING MEDIA |
Dry chemical, carbon dioxide, foam or water |
|
Conditions |
If the product enter in contact with acid or oxidizer product they could be produce hot temperature.None |
|
HAZARDOUS DECOMPOSITION PRODUCTS |
Oxides of carbon, nitrogen and sulfur; hydrogen chloride; ammonia |
|
PROTECTION AND SPILL |
Ventilate area. Use specified protective equipment. Contain and absorb on absorbent material. Place in waste disposal container. Flush area with water. Wet area may be slippery. Spread sand/grit |
|
DISPOSAL INSTRUCTIONS |
Water contaminated with this product may be sent to a sanitary sewer treatment facility,in accordance with any local agreement,a permitted waste treatment facility or discharged under a permit. Product as is - Incinerate or land dispose |
|
HANDLING |
Normal chemical handling |
|
STORAGE |
Keep containers closed when not in use. Protect from freezing |
|
ENGINEERING CONTROLS |
Adequate ventilation to maintain air contaminants below exposure limits. |
|
SKIN PROTECTION |
Rubber, butyl, viton or neoprene gloves -- Wash off after each use. Replace as necessary. |
|
EYE PROTECTION: |
splash proof chemical goggles |
|
Appearance |
Colorless To Amber |
|
Physical State |
Liquid |
|
Flash Point |
> 200F > 93C |
|
Odor |
Slight |
|
Specific Grav.(70F,21C |
1.197 |
|
Freeze Point (C) |
-5 |
STABILITY: Stable under normal storage conditions.
HAZARDOUS POLYMERIZATION: Will not occur.
INCOMPATIBILITIES: May react with strong oxidizers.
DECOMPOSITION PRODUCTS: oxides of carbon, nitrogen
| Skin Contact | Primary route of exposure; Severe irritant to the skin |
| Eye Contact |
Severe irritant to the eyes, possibly corrosive |
| INGESTION EFFECTS |
May cause gastrointestinal irritation with possible nausea, vomiting, abdominal discomfort and diarrhea. |
|
SYMPTOMS OF EXPOSURE |
Causes irritation of the skin, eyes, and/or respiratory system |
AQUATIC TOXICOLOGY ::: Daphnia magna 48 Hour Static Renewal Bioassay (pH adjusted) LC50= 342; No Effect Level= 250 mg/L Fathead Minnow 96 Hour Static Renewal Bioassay (pH adjusted) LC50= 61.6; No Effect Level= 25 mg/L
BIODEGRADATION ::: BOD-28 (mg/g): 142 , BOD-5 (mg/g): 130 , COD (mg/g): 805 , TOC (mg/g): 242
Please be advised; however, that state and local requirements for waste disposal may be more restrictive or otherwise different from federal regulations. Consult state and local regulations regarding the proper disposal of this material.
|
DOT HAZARD: |
ORS (when container > RQ) |
|
PROPER SHIPPING NAME |
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.(DIETHANOLAMINE SOLUTION) 9, NA 3082, PG III, RQ |
N/A
The information contained in this literature is believed to be accurate and is offered in good faith for the benefit of the customer. The company however, can not assume any liability or risk in the use of its chemical product since the conditions of use are beyond our control
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.