Name: M.DET-300
Brand: Kolkata Chemical
Availability: InStock

This is multi - prupose heavy duty cleaing LABSA and ethoxy lauryl solution used as a common dirt remover in residential, commercial and industrial cleaning processes. It is low toxic product with an exceptional solvency power on soil & oily matter & having good foaming qualities. It is free from Hydrocarbon solvents , Biodegradable and minimizes the extreme hazards to personnel in handling materials

Application

Universal cleaner for home, institutes, plant and machinery. compatible with all type of surfaces.

Dose

RXSOL-20-T-300-210 has a long non-polar hydrocarbon chain and a highly polar group at the end of the molecule thus having a cleaning power better than ordinary soap.

CHARATERISTIC: ( Why this is better than soap?)

1) This solution is superior to soaps because they donot form insoluble salts Ca+²,Mg+², & Fe+³,ions as soaps do. For e.g :- 2RCOO¯Na+ +Mgso4 Ù(RCOO)2 Mg+² + Na2So4 Soaps Insoluble 2R So3¯Na+ + MgSo4[ R So3¯]2Mg+² +Na2So4

Hence this ,can be used in either Soft Water or Hard Water, While ordinary soaps are precipitated in Hard Water and go waste.

2) This solution , have a long non-polar hydrocarbon chain and a highly polar group at the end of the molecule. Thus they have CLEANING POWER , as better than ORDINARY SOAP.

Ordinary Soaps were not readily BIODEGRADABLE, In other words, they
were not broken down by BACTERIA in the SEWAGE TREATMENT PLANTS. They caused water POLLUTION while M.DET 300 , are BIODEGRADABLE , so there is no question of water pollution.

Product Properties
Appearance	Pale yellow liquid
Density	In g/cm³ at 15°C: 1.01
Compatibility
Metal	No known effect
Rubber	No known effect
pH	Alkaline
Packaging	RXSOL-20-T-300-210	Size (in Litres)
		25,, 210

Characteristics :

Removes grease, oil, carbon deposits, soil and grime.
Keeps loosened deposits in suspension preventing re-deposition.
Low toxic.
Biodegradable.
Non-flammable.
Free from hydrocarbon solvents.
Effective and economical in use
Water-based cleaner.
Non-corrosive to ferrous metals.
Suitable for all tank-coatings.
Can be used for gas and hydrocarbon freeing of tanks.
Can be used for deodorizing
Contains wetting agents.
Leaves surfaces residue free.
Acceptable for use in food areas.
Suitable for accommodation cleaning of woodwork, leather, desks, etc.
Suitable for cleaning of toilets and showers.
Suitable for cleaning of reefer boxes.
Can be used for cleaning of windows and portholes.
Can be used for cleaning of dishes.
Can be used for cleaning of hospitals. Can be used for hand laundry cleaning.

Technical specifications

STRUCTURE :
HEAD - Molecule have a long chain non polar Hydrocarbon, whose structure can be Studied as follows:-
Head : It is water soluble & ‘-‘Vely charged.
Tail : It is oil soluble.

CLEANSING ACTION

When solution water is poured over the DIRTY surface the hydrocarbon Tail of the each molecules peg in to it, while the (–ve) HEAD is held in water. The dirt or grease layer is then disloged from the skin by rubbing or from garment by tumbling and stirring. Each grease globule thus separated in PIN CUSHIONED by hydrocarbon TAILS with (-ve) HEADS out wards in water. The (-ve) HEAD globules keep apart by mutual repulsions & are said to have emulsified.The emulsified grease globules bearing dirt can be readly washed with water.

Note

Suitable for cleaning of RIGS and engine components like fuel and Lube oil filters, Injection nozzles, pump components, inlet and exhaust valves & primarily refers to cleaning of hard surfaces, such as Decks, Tanks, Engine-rooms, etc. can be used for all types of cleaning and degreasing and may be applied by brush, handspray, high and low pressure washing machines etc...

Remarks / Precaution

MSDS

Product Name	:	RXSOL-16-1029-020
Product Type	:	M.DET-300

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Phone	:	+91 22 65113333 / 5555 / 9999 / 27611360
Fax	:	+91 22 2781 1318 :::AOH :0091 9821214367
Email	:	mail@rxmarine.com

Name	Cas#	WT.%	TLV.
soap solution. Cleaner with a proprietary composition NOT CONSIDERED HAZARDOUS under the OSHA Hazard Communication Standard CFR Title 29 1910 1200

*See Section 16

Hazardous Polymerization

Hazardous polymerization will not occur.

Routes of Entry	Product may enter the body via eye contact, skin contact and ingestion. See Section 8
Potential Health Effects
Eye	Eye contact may cause irritation. Avoid eye contact with product.
Skin	Skin contact may cause irritation. In case of skin irritation, wash with soap and water and discontinue use.
Ingestion	Swallowing may cause irritation of mouth and throat. It may also cause nausea. Do not taste or swallow product.
FIRST AID MEASURES
Eye Contact	If irritation is noted, IMMEDIATELY flush eyes with a directed stream of water for at least 15 minutes while forcibly holding eyelids apart to ensure complete irrigation of all eye and lid tissue. GE IMMEDIATE MEDICAL ATTENTION IF IRRITATION OCCURS.
Skin Contact	Flush skin with water and wash with soap and water. If clothing is penetrated, immediately remove clothing and flush skin with water. Wash clothes before resuse. GET PROMPT MEDICAL ATTENTION IF IRRITATION OCCURS.
Ingestion	Do not induce vomiting. If spontaneous vomiting is inevitable, PREVENT ASPIRATION by keeping victim's head below the knees. GET IMMEDIATE MEDICAL ATTENTION
Inhalation	Remove to fresh air. If breathing is difficult, have trained person administer oxygen. If respiration stops, have trained person administer mouth-to-mouth resuscitation. GET MEDICAL ATTENTION IMMEDIATELY.

Flammable Properties	Non Flammable
Flash point	N/A
Flammable Limits	Does Not Apply
Hazardous Combustion	None known.
Extinguishing Media	Water fog or fine spray, carbon dioxide, dry chemical, foam.
Fire Fighting Instructions	N/A

Large Spill	Contain spill. Prevent Runoff from entering drains, sewers or streams. Dispose in accordance with all applicable federal, state and local health environmental guidelines.
Spill	Contain spill. Follow same procedures as above for large spill.

Storage Temperature	Store this product below 120º F. (40º C.), preferably below 75º F. (24º C), in a cool, dry, well venailated area away from heat, sparks, flames, oxiders and out of direct sunlight. For best results use within 12 months. Never co-mingle with bactercides or quatemary disinfectants, as they will degrade/inactivate enzymes.
General Precautions	Keep container closed when handling or storage.

Personal Protection
Gloves	Wear Gloves if sensitive
Safety Glasses	Keep out of eyes. Use safety glasses

Vapor Pressure	N/A
Vapor Density (air = 1):	N/A
Specific Gravity	N/A
Solubility in Water	Soluble
Volatile Organic	Negligible
Appearance
pH	Normal
Boiling Point	208º - 210º F.
Flash Point:	N/A
Freezing Point	32º F. (0º C.)
Odor	Pleasant Fragrance

Materials to Avoid	Avoid contact with strong oxidizing and reducing agents.
Conditions to Avoid	See Section 7.
Hazardous Decomposition	Not known. See Section 5.

Toxicological information	The ingestion of significant quantities may cause burning sensation.Can cause damage to the digestive system.
Inhalation	Not regarded as a potential route of exposure. Can cause damage to the respiratory system.
Contact with skin	Causes severe burns (R35)
Contact with eyes	Causes severe burns (R35)
Ingestion	The ingestion of significant quantities may cause damage to digestive system.
Carcinogenicity	No evidence of carcinogenic effects.

Ecotoxicity	May cause acute effects in the aquatic environment.
Mobility	Completely soluble in water.
Persistence and Biodegradability	Degrades by hydrolysis
Bioaccumulation Potential	Bioaccumulation is insignificant
Other Adverse Effects	No environmental problems are expected when the product is used / handled correctly. In its intended use, the product will not be released into the environment.

Classification	This material and/or its container must be disposed of as hazardous waste.EU Waste class: 06 02 02
Disposal considerations	Do not discharge into drains or the environment, dispose to an authorised waste collection point.Disposal should be in accordance with local, state or national legislation

Proper Shipping Name:
UN
	Proper Shipping Name	Sodium hydroxide. solution
	UN NO.	1824
	Hazard Class	8	Packing Group	II
Road/Rail (ADR/RID)
	Proper Shipping Name	Sodium hydroxide. solution
	ADR UN No.	1824
	ADR Hazard Class	8	Termcard	80S1824
Sear (IMDG)
	Proper Shipping Name	Sodium hydroxide. solution
	IMDG UN No.	1824
	IMDG Hazard Class	8	IMDG Pack Group	II
	IMDG EmS	F-A, S-B	IMDG subrisk	NA
Air(ICAO/IATA)
	ProperShippingName:	Sodiumhydroxide, solution
	ICAO UnNo.:	1824
	ICAO HazardClass.:	8	ICAO PackingGroup.:	II
	ICAO subrisk:	N/A	ICAO Labels	8, CAO
	ICAO Flashpoint:	N/A
DOT/CFR(USDepartment ofTransportation
	DOTProperShippingName:	Sodium hydroxide, solution
	HazardousMaterial	Sodium hydroxide
	Hazard Class:	8	IdentificationNumber:	UN1824
	Product RQ (lbs):	3640	DOTsubrisk:	N/A
	DOTLabels:	8	DOTFlashpoint:	N/A

Risk Phrases	Causes severe burns (R35)
Safety Phrases	In case of contact with eyes, rinse immediately with plenty of water and seek medical advice (S26).Wear suitable protective clothing, eye/face protection (S36/39).In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) (S45)

Disclaimer

The statements contained herein are offered for informational purposes only and are based upon technical data that Blulux Laboratories Pvt. Ltd. believes to be accurate. It is intended for use only by persons having the necessary technical skills and at their own discretion and risk. Since conditions and manner of use are outside our control, we make NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY, FITNESS OR OTHERWISE

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

M.DET-300

Characteristics :

Need a quote for this product?