RXSOL Lube Oil Cleaner removes lube oil, oil mixed with hard deposit, like rust and lime. Rxsol Lube Oil Celaner can also remove deposits from glycol and similar products. This Cleaner is a multi purpose product that can handle several different applications as well as solve and clean complex contaminations.
RXSOL Lube Oils Celaner can be used for cleaning of lube oil, Lube and fuel oil separators, heat exchangers , Lube oil Tanks and pipe systems. RXSOL Lube Oil Celaner can be used for manual cleaning and Cleaning In Place with cleaning equipment.
Manual Cleaning
For manual cleaning of separator parts and machinery parts.Make a solution between 5-20% concentration depending on how dirty Tank and equipment to be cleaned is. Both oil and lime will be solved with time, let soak for at least 2 hours. After 2 hours the parts can be cleaned using by High Pressure Machine rinsing or brushing.
Cleaning In Place of Separator
For the lube oil separator use a 20% solution
For the fuel oil separator use a 10% solution
Recommended cleaning temperature is 70-90oC (158-194oF). A normal cleaning cycle is between 1 to 3 hours depending on the dirtiness and character. If the separator has very hard deposits the cleaning cycle may have to be repeated with new cleaning fluid.
Lube Oil Tank :
- Instead of recirculation cleaning the RXSOL Lube Oils Cleaner can injected into the Butter worth system . Kindly make the solution 0.5 -5% and inject same. Depending on the tank size and height fill the necessary amount of freshwater or seawater into the service tank .
- Butter worth all tanks to be cleaned 1-1,5 hour using the water from the service tank .
- Heat the water by means of heating coils, cargo heat exchanger or going via the Butter worth heater.
- The pre-cleaning temperature should be between 70 and 80°C.
- Pump the waste water from the tanks to be cleaned back to service tank (overtop).
- Odour: Characteristic odour
- Appearance: Liquid, colourless to yellow
- Vapour pressure - not known
- Freezing point 0 °C
- Completely soluble in water
- Auto-ignition point >150 deg C at 760 mm Hg- Odour: Characteristic odour
- Appearance: Liquid, colourless to yellow
- Vapour pressure - not known
- Freezing point 0 °C
- Completely soluble in water
- Auto-ignition point >150 deg C at 760 mm Hg
Features
- The product is readilly water soluble
- Does not contain nonyl phenol ethoxylates or other estrogenic compounds.
- Non-flammable.
- Remove heavy tenacious deposits.
- Cleans down to metal surfaces.
- Leaves no film or residue.
- Reduces down time.
- Allows cleaning of dics without dismantling the separator.
- Cleans all types of separator discs.
- The product is self splitting.
- Product is tested and approved by Marinfloc.
This is VERY IMPORTANT after circulation of this materials, FLUSH SYSTEM completely till clear water will comes, And circulation with neutraliser RXSOL-20-2005-025 ( rxmarine.com/alkaleen-liquid-heavy-duty-25-ltr )
Exchange of Heat in between Shell side and lube oil of coolers are directly effecting output of cooling effect. Regular chemical cleaning of Heat Exchanger baffles and fins for enhanced heat exchange into the system.
RXSOL Lube Oil Cleaner is a powerful multi-purpose cleaner formulated to remove lube oil, oil mixed with hard deposits such as rust and lime.
It also effectively dissolves residues originating from glycol and similar process fluids.
The product is designed to tackle complex and mixed contaminations across multiple industrial applications.
It is suitable for manual cleaning as well as Cleaning-in-Place (CIP) of separators, heat exchangers, tanks and piping systems.
Key Features of Lube Oil Cleaner
- Removes lube oil, oil-based sludge, rust and lime scale deposits
- Effective on glycol and mixed-fluid contamination residues
- Suitable for separators, heat exchangers, lube oil tanks and pipelines
- Compatible with both manual cleaning and CIP systems
| Product Name | RXSOL-20-2050-025 |
| Product Type | Lube Oils Cooler Cleaner |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Kolkata, Chennai, Visakhapatnam, Muscat, Fujairah, Nairobi
| Phone | +91 22 65113333 / 5555 / 9999 / 27611360 |
| Fax | +91 22 2781 1318 AOH :0091 9821214367 |
| mail@rxmarine.com |
|
Chemical Name |
Concentration |
CAS Number |
EC Number |
R Phrases* |
Symbols |
|
Emulsifiable Liq of Aliphatic & Aromatic, unspecified |
10-30 |
95-50-1 |
202-425-9 |
65, 66 |
Xn |
|
Fattyalcoholethoxylate |
10-30 |
34398-01-1 |
500-084-3 |
41 |
Xi |
|
2-,2(butoxyethoxy)ethanol |
5-10 |
112-34-5 |
203-961-6 |
36 |
Xi |
|
2-ethylhexanolethoxylate |
1-5 |
26468-86-0 |
polymer |
41 |
Xi |
| Emulsified Xylenol | 10-30 | 1300-71-6 | 215-089-3 | 24/25, 34, 51/53 | T, N |
*See Section 16
Harmful
|
Odour |
Solvent odour |
|
Appearance |
Liquid, pale yellow, soluble in water |
|
Contact with eyes |
Risk of serious damage to eyes (R41) |
|
Contact with skin |
Causes irritation, Prolonged skin contact will result in defatting of the skin, leading to irritation, and in some cases, dermatitis |
|
Inhalation |
Vapours or aerosols may cause irritation of eyes, nose and respiratory tract, In cases of severe exposure, shortness of breath may develop |
|
Ingestion |
Harmful: may cause lung damage if swallowed (R65) |
|
Contact with skin |
Remove contaminated clothing immediately and drench affected skin with plenty of water. Then wash with soap and water Seek medical attention if irritation persists |
|
Contact with eyes |
If substance has got into eyes, immediately wash out with plenty of water for at least 15 minutes Irrigate eyes thoroughly whilst lifting eyelids When in doubt or symptoms persist, seek medical attention |
|
Ingestion |
Do not induce vomiting Never give anything by mouth to an unconscious person Give water or milk to drink |
|
Inhalation |
Keep warm and at rest, in a half upright position. Loosen clothing |
|
General |
When in doubt or symptoms persist, seek medical attention Use good personal hygiene practices |
- Non-flammable
- May give off noxious and toxic fumes in a fire
- Not flammable. In case of fire use extinguishing media appropriate to surrounding conditions
|
Personal Precautions |
Wear protective clothing as per section 8. |
|
Environmental Precautions |
Do not flush spilt material into any public water system. |
|
Immediate Actions |
Use appropriate containment to avoid environmental contamination (S57) |
|
Clean Up Actions |
Absorb spillage in inert material and shovel up Ventilate the area and wash spill site after material pick-up is complete. |
|
Special Precautions |
Wear protective clothing as per section 8. |
|
Handling |
Use good personal hygiene practices Avoid contact with skin and eyes (S24/25) Eyewash bottles should be available. |
|
Storage |
Keep only in the original container in a cool, well ventilated place (S3/9/49). |
|
Exposure Limits |
No exposure limits have been set for this substance. |
|
Exposure controls |
No special ventilation is required unless the product is used in a spray form. |
|
Occupational exposure controls |
Wear goggles giving complete eye protection Wear plastic or rubber gloves Wear apron No respiratory protection is required unless subject to contact with substance mist. |
Goggles Gloves Suit No_Smoking
|
Odour |
Solvent odour |
|
Appearance |
Liquid, pale yellow, soluble in water |
|
pH |
9.3 - 10.3 at 100 % concentration |
|
Boiling point |
100 °C at 760 mm /Hg |
|
Vapour pressure |
not known |
|
Vapour density |
not applicable |
|
Freezing point |
0 °C at 760 mm/Hg |
|
Completely soluble in water |
|
|
Specific gravity |
(water=1) 0.93 |
|
Non-flammable |
|
- This article is considered stable under normal conditions.
- Avoid over heating, Keep away from frost.
- Decomposition products may include carbon oxides.
|
Toxicological information |
No experimental data available |
|
Inhalation |
By comparison with analogous substances, it is concluded that it may be harmful |
|
Contact with skin |
May cause redness and irritation |
|
Contact with eyes |
May cause severe irritation |
|
Ingestion |
The ingestion of significant quantities may cause damage to lungs |
|
Carcinogenicity |
No evidence of carcinogenic effects |
|
Mobility |
Completely soluble in water. |
|
Persistence and Biodegradability |
The components in this product are readily biodegradable. |
|
Bioaccumulation Potential |
Bioaccumulation of the components in this product is insignificant. |
|
Other Adverse Effects |
No environmental problems are expected when the product is used / handled correctly. |
|
Classification |
This material and/or its container must be disposed of as hazardous waste. EU Waste class: 07.01 |
|
Disposal considerations |
Do not discharge into drains or the environment, dispose to an authorised waste collection point |
- Not classifiedashazardousfortransport
- Repeated exposure may cause skin dryness or cracking (R66)
- Risk of serious damage to eyes (R41)
Safety Phrases:
- Do not breathe spray/mists (S23)
- In case of contact with eyes, rinse immediately with plenty of water and seek medical advice (S26)
- If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label (S62)
- Wear suitable protective clothing, eye/face protection and gloves (S36/37/39)
Text of R and S p hrase codes used in this safety data sheet:- R36: Irritating to eyes; R41: Risk of serious damage to eyes; R65: Harmful: may cause lung damage if swallowed; R66: Repeated exposure may cause skin dryness or cracking .The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications - usage in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from manufacturer Composition information in accordance with Regulation (EC) No 648/2004 of the European Parliament and of the Council of 31 March 2004 on detergents:
| Aliphatic hydrocarbons | 15-30 % |
| Anionic surfactants | 15-30 % |
| Amphitricha surfactants | 5 % |
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.