LIQUIVAP TREAT

Home / Products / Boiler Chemicals / LIQUIVAP TREAT
IMPA / ISSA CERTIFIED CHEMICAL FORMULATION

LIQUIVAP TREAT

Boiler Chemicals LIQUIVAP TREAT
Express Kolkata & Haldia Port 2-4 Hr Berth Delivery
Boiler Chemicals
Part No. / SKU: RXSOL-60-6001-210

Boiler water treatment product, formulated with polymer scale inhibitors, alkaline compounds, phosphates and condensate protecting amines.

Available Packaging:
Ready stock available in 5 Litre, 20L, 25L, 210 Litre HDPE drums and 1000L IBC Totes.
Get Quote on WhatsApp Request Written RFQ +91 8069976670
Ready Port Stock 25L, 210L Drums & 1000L IBC
IMPA / ISSA Standard MARPOL Compliant Formulations
ISO 9001:2015 QA TDS, MSDS & COA Available

Application & Uses

Procedure Of Use and Dose Rates: POLYELECTROLYTE  polymer  of RXSOL-51-6001-025 reacts with the potential scale forming salts in the water to prevent them from adhering to heat transfer surfaces. These solids are held in suspension and  easily removed  from  the evaporator  line. Finally RXSOL-51-6001-025 also have defoaming properties by which will stop foaming in EVAPORATOR. And by that way Distilled water quality is maintained in side the EVAPORATOR.

Used in both high and low pressure evaporators. 

Dosage & Directions for Use

Dosage :

Daily Out Put Evaporator Daily  RXSOL VT 6001 Requirement
10 -20 MT 100-200 ML
30-40 MT 300-400 ML
50-60 MT 500-600



Setting the Flow Rate: The treatment is added to the dosage tank and mixed with water. Example: With the 0.5 litres of Vaptreat add sufficient water to make up 50 litres of liquid.The standard flow meter is Adjustable-Rate=0-l00ml/minute.Flow rate calculation: Flowrate = 50 Litres/24 x 60= 35 ml/min setting  i.eThis will last 24 hours.

Note: We can remove  existing  mineral scale deposits  by using  A  5-10%  solution of  RXSOL-51-6001-025 Otherwise to save money and cleaning of HARD DEPOSITS which is formed due to not proper treratment of Evaporator, we have specialized Safe Scale Remover with Indicator ( Product code is RXSOL-22-2210-200 ).

Technical Specifications & Properties

CharactersItics   Properties
Appearance Thermal Firmness Clear  yellow liquid 250° C            By keeping heat transfer surfaces free of scale, Ensures that the evaporator works at maximum efficiency.
Density In g/cm3 at 15°C: 1.1

Permits more efficient evaporation.
pH (1 Vol%) 9

Reduces downtime and maintenance costs.
Compatibility   Concentrated, safe liquid, easy and economical dosing.
Metal No known effect

For use in both high pressure and vacuum evaporators
Rubber No known effect The antifoaming properties ensure that distillate quality is high
Packaging

20 / 25 ltr

Improves the quality of distilled water

Recommended Industrial & Shipboard Areas

LIQUIVAP TREAT is an advanced liquid boiler water treatment product, formulated with polymer scale inhibitors, alkaline compounds, phosphates and condensate protecting amines. In addition to combining alkalinity control, scale inhibitors, and deposit control, LIQUIVAP TREAT provides protection from corrosion. It efficiently treats Boiler/Steam Water in System lines and Condensate. It provides an excellent and very practical way of treatment, using only one product. Scale, corrosion and foaming are the main problems in Marine Boilers, due to the fact that when the water evaporates, precipitation of salts occurs rapidly.
 
If these salts were not treated they could be turned into very hard scale deposits, which would reduce the system ability to produce steam. This can result in a low volume of steam, which can delay critical operations
on the vessel where steam is used as the ‘driving force’, and will certainly increase the cost of heating, as more fuel would be required to produce the same result.If the boiler water is not treated properly, this would be rapidly resulting in the whole system deterioration due to corrosion.
 
LIQUIVAP TREAT controls the problems described above by achieving the appropriate chemical concentrations and their correct monitoring will maintain the system in a good working condition. When properly dosed it creates the required Alkalinity and Phosphate concentration levels to avoid the acidic “attack” and salts precipitation respectively.
 
Furthermore, it releases into the system a volatile amine inhibitor that circulates with steam in the tube lines, protecting the steel metallic surfaces and condensate system from Carbonic Acid “attack”. Along with the use of LIQUIVAP TREAT the application of an Oxygen scavenger is required to completely remove the Oxygen dissolved in water, as this is the main cause of corrosion in the system. LIQUIVAP TREAT can be combined  with  Oxygen scavengers and other boiler water treatment chemicals.

Product Description & Chemical Profile

VapourTreatment  For controlling of Scale & Foam ::: Neutral Liquid for prevention of scale in seawater Evaporators
This is a highly Active Antifoulant, Water Scale Inhibitor, Dispersant and Anti-precipitant compound for use in industrial and Marine Water systems, such as cooking systems, Heat Exchangers, air conditioning equipment, etc.

Kolkata & Haldia Port Logistics Desk

Need pricing, bulk volume, or vessel delivery today?

Send us your required quantity, chemical grade, delivery location, or vessel IMO number. Our technical chemical supply team replies within 1 hour.

WhatsApp Us Now Request Fast Quote

Need a quote for this product?

Tell us the grade, packing and quantity you need — we ship across India and to major ports.

Request a quote chemicalkolkata @ gmail.com