Lime Scale Remover

Lime eater dissolves hard and old lime scale deposits from your appliances. It extends the life of the appliance and saves running cost.
Category
MSDS

 

Product Name : Lime Scale Remover
Part Number : RXSOL-11-1052-025

Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.

VASHI ,NEW BOMBAY 400703 INDIA

Branch : Kandla, Sikka, Dahej, Hazira, JNPT, Goa, Mangalore, Cochin, Tuticorin, Chennai, Kakinada, Vizag, Paradip, Kolkata, UAE, Singapore.

 

 

Phone +91 22 27815540 / 41 / 42
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email 123@rxmarine.com
Website www.rxmarine.com

 

 

Name     of        Substance                          Cas Number EINECS No Wt.% Symbol
PHOSPHORIC ACID 7664-38-2 231-633-2 10 -30 %  Xi
ALKYL BENZYL DIMETHYL AMMONIUM CHLORIDE 68424-85-1 270-325-2  10 - 30%  Xn
Quaternary Ammonium Chloride 68391-01-5 269-919-4 10 - 30%  C
Propan-2-ol 67-63-0 200-661-7 1 - 5 %  Xi

 

Classification (EC 1272/2008)
Physical hazards         
Not Classified
Health hazards  Skin Corr. 1B - H314 Eye Irrit. 2 - H319
Environmental hazards Aquatic Chronic 3 - H412
 Label elements

Pictogram

Signal word  Danger
Hazard statements  H314 Causes severe skin burns and eye damage. H319 Causes serious eye irritation. H412 Harmful to aquatic life with long lasting effects
Precautionary statements  P280 Wear protective clothing, gloves, eye and face protection. P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P302+P352 IF ON SKIN: Wash with plenty of water. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P313 Get medical advice/ attention. P501 Dispose of contents/ container in accordance with national regulations.
Contains  PHOSPHORIC ACID
Detergent labelling 5% cationic surfactants, 5% non-ionic surfactants, Contains ALPHAISOMETHYLIONONE, CITRONELLOL, LIMONENE
Supplementary precautionary
statements
P362+P364 Take off contaminated clothing and wash it before reuse.
Other hazards
 
None

  

Description of first aid measures Inhalation
If spray/mist has been inhaled, proceed as follows. Move affected person to fresh air and
keep warm and at rest in a position comfortable for breathing. Get medical attention if any discomfort continues
Ingestion Never give anything by mouth to an unconscious person. Do not induce vomiting. Rinse mouth thoroughly with water. Get medical attention immediately.
Skin contact     
Remove affected person from source of contamination. Remove contaminated clothing. Wash
skin thoroughly with soap and water. Get medical attention promptly if symptoms occur after washing.
Eye contact
Remove affected person from source of contamination. Remove any contact lenses and open
eyelids wide apart. Continue to rinse for at least 15 minutes. Get medical attentio immediately. Continue to rinse.
Most important symptoms and effects, both acute and delayed Inhalation This is unlikely to occur but symptoms similar to those of ingestion may develop.
Ingestion May cause chemical burns in mouth and throat. May cause stomach pain or vomiting.
Skin contact This product is strongly corrosive.
Eye contact Causes serious eye damage
Notes for the doctor
Treat symptomatically.
 

Suitable extinguishing media The product is not flammable. Use fire-extinguishing media suitable for the surrounding fire.
 Hazardous combustion
products   
None known.
 
Protective actions during firefighting  No specific firefighting precautions known.
Special protective equipment
for firefighters
 Firefighter's clothing conforming to European standard EN469 (including helmets, protective
boots and gloves) will provide a basic level of protection for chemical incidents.

Personal precautions Wear protective clothing as described in Section 8 of this safety data sheet.
Enviromental  Precaution 
Avoid discharge to the aquatic environment. The product may affect the acidity (pH) of water
which may have hazardous effects on aquatic organisms. Collect and dispose of spillage as indicated in Section 13
Methods and materials for
containment and cleaning up
Do not touch or walk into spilled material. Stop leak if possible without risk. Absorb in vermiculite, dry sand or earth and place into containers. Flush contaminated area with plenty of water.
Reference to other sections  For personal protection, see Section 8.

Precautions for safe handling Usage precautions Avoid spilling. Avoid contact with skin and eyes.
Storage precautions Store in closed original container at temperatures between 0°C and 30°C. Store away from incompatible materials (see Section 10).
Specific end use(s) The identified uses for this product are detailed in Section 1.2.

PHOSPHORICACID Long-term exposure limit (8-hour TWA): WEL 1 mg/m³ Short-term exposure limit (15-minute): WEL 2 mg/m³ WEL = Workplace Exposure Limit
Ingredientcomments WEL = Workplace Exposure Limits
DNEL  Workers - Inhalation; Long term local effects: 1 mg/m³ Workers - Inhalation; Short term local effects: 2 mg/m³ General population - Inhalation; Long term local effects: 0.73 mg/m³
ALKYL BENZYL DIMETHYL AMMONIUM CHLORIDE (CAS: 68424-85-1) DNEL Workers - Inhalation; Long term systemic effects: 3.96 mg/m³ Workers - Dermal; Long term systemic effects: 5.7 mg/kg/day General population - Inhalation; Long term systemic effects: 1.64 mg/m³ General population - Dermal; Long term systemic effects: 3.4 mg/kg/day General population - Oral; Long term systemic effects: 3.4 mg/kg/day
PNEC  - Fresh water; 0.0009 mg/l - Marine water; 0.00096 mg/l - Intermittent release; 0.00016 mg/l - STP; 0.4 mg/l - Sediment (Freshwater); 12.27 mg/kg - Sediment (Marinewater); 13.09 mg/kg - Soil; 7 mg/kga
Personal   Protection Eye protection : Eyewear complying with an approved standard should be worn if a risk assessment indicates eye contact is possible. The following protection should be worn: Chemical splash goggles or face shield.
Hand protection : Chemical-resistant, impervious gloves complying with an approved standard should be worn if
a risk assessment indicates skin contact is possible. The most suitable glove should be chosen in consultation with the glove supplier/manufacturer, who can provide information about the breakthrough time of the glove material. It is recommended that gloves are made of the following material: Rubber (natural, latex).  
Appropriate engineering controls  Avoid inhalation of vapours. Observe any occupational exposure limits for the product or ingredients.
Other skin and body
protection
 
Wear appropriate clothing to prevent any possibility of skin contact.
Hygiene measures
Provide eyewash station and safety shower. Wash promptly if skin becomes contaminated.
Promptly remove any clothing that becomes contaminated. Do not eat, drink or smoke when using this product.
Respiratory protection No specific recommendations

       gloves                suit                

            Gloves                       Suit                          

  

  Appearance Liquid.
    Colour Blue.
    Odour Perfume.
 Odour threshold  Not determined.
    pH pH (concentrated solution): 1.3
Melting point Not determined.
Initial boiling point and rangea
Not determined.
 
Flash point Not applicable
Evaporation rate Not determined
Upper/lower flammability or
explosive limits
Not applicable
Vapour density Not determined.
Relative density Not determined.
Vapor pressure No data available
Relative vapor density No data available
Relative density Not applicable
Solubility(ies) Soluble in water
Partition coefficient Not determined.
Auto-ignition temperature  Not applicable
Decomposition Temperature  Not determined.
Viscosity Not determined.
Explosive properties Not applicable.
Oxidising properties Does not meet the criteria for classification as oxidising.
Other information None

Recativity                                             The following materials may react with the product: Alkalis. Chemically-active metals. Inorganic halides. Oxidising agents. Isocyanates
Stability Stable at normal ambient temperatures and when used as recommended.
Possibility of hazardous reactions Not known
Incompatible materials Strong oxidising agents. Acid-reactive materials. Alkalis. Inorganic halides. Isocyanates. chlorine-based bleaching agents
Hazardous decomposition
products

No known hazardous decomposition products.

Condition to Avoid
Avoid excessive heat for prolonged periods of time. Avoid contact with the following materials:
Strong alkalis. Oxidising materials.

Acute toxicity - oral
ATE oral (mg/kg)
8,693.69
 
Acute toxicity - dermal
Notes (dermal LD₅₀)          

Based on available data the classification criteria are not met.

Acute toxicity - inhalation
Notes (inhalation LC₅₀)
Based on available data the classification criteria are not met.
Skin corrosion/irritation
Skin corrosion/irritation
Corrosive to skin.
Serious eye damage/irritation
Serious eye damage/irritation
Risk of serious damage to eyes.
Respiratory sensitisation
Respiratory sensitisation
Based on available data the classification criteria are not met.
 
Skin sensitisation
Skin sensitisation
Based on available data the classification criteria are not met.
 
Germ cell mutagenicity  
Genotoxicity - in vitro Does not contain any substances known to be mutagenic
Carcinogenicity
Carcinogenicity
Does not contain any substances known to be carcinogenic.
Reproductive toxicity
Reproductive toxicity - fertility
Does not contain any substances known to be toxic to reproduction.
Specific target organ toxicity - single exposure
STOT - single exposure
No information available
Specific target organ toxicity - repeated exposure
STOT - repeated exposure 
No information available.
Aspiration hazard
Aspiration hazard 
Based on available data the classification criteria are not met.
Inhalation May cause damage to mucous membranes in nose, throat, lungs and bronchial system
Ingestion May cause chemical burns in mouth, oesophagus and stomach.
Skin contact This product is corrosive.
Eye contact  May cause chemical eye burns.
Acute toxicity oral (LD₅₀
mg/kg)
795.0
Species Rat Rat
ATE oral (mg/kg) 795.0
Acute toxicity dermal (LD₅₀
mg/kg)
1,560.0
Species Rata
ATE dermal (mg/kg)
1,560.0
 
Skin corrosion/irritation
Animal data
Primary dermal irritation index: 6.29


Ecotoxicity
Because of the low pH of this product, it would be expected to produce significant ecotoxicity upon
exposure to aquatic organisms and aquatic systems.
Persistence and degradability No data is available on the degradability of this product
Bioaccumulative potential No data available
Other adverse effects       No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation potential, endocrine disruption, global warming potential) are expected from this component.

 

Disposal instructions Collect and reclaim or dispose in sealed containers at licensed waste disposal site. Do not allow this material to drain into sewers/water supplies. Dispose of contents/container in accordance with local/regional/national/international regulations.
Hazardous waste code
The waste code should be assigned in discussion between the user, the producer and the waste
disposal company
Waste from residues / unused
products
Dispose of in accordance with local regulations. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe manner (see: Disposal instructions)

 DOT                  Not regulated as dangerous goods.
IATA
Not regulated as dangerous goods.
 
IMDG                                                                                                    Not regulated as dangerous goods.

Regulations In accordance with REACH Regulation (EC) No 1907/2006 as last amended with respect to SDS provisions by Commission Regulation (EU) 2015/830.
COMMISSION REGULATION (EU) No 453/2010 of 20 May 2010 amending Regulation (EC) No 1907/2006 of the European Parliament and of the Council on the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency, amending Directive 1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC.
Chemical safety assessment No data available.

 

 

Other Information  

The information above is believed to be accurate and represents the  best information   currently    available  to us.  However,   we   make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and  we assume  no liability resulting from its use. Users should make  their  own  investigations  to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International  has been advised of the possibility of such damages.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Need a quote for this product?

Tell us the grade, packing and quantity you need — we ship across India and to major ports.

Request a quote office@kolkatachemical.com