Lac Alka Liquid HD

Well balanced alkaline cleaner. It is free hydrocarbon solvents.Gentle & sutable for tank cleaning operation. A very strong alkaline cleaner, which can be used to soften up / remove baked on drying oils and also used after animal and vegetable oils,
Category

Well balanced heavy duty alkaline tank cleaner. A very strong alkaline lac cleaner, which can be used to soften up and cleaning of drying / non drying fats oils and also used after animal and vegetable oils, fish oils, tall oils, tung oil etc. It is free hydrocarbon solvents.Gentle & sutable for tank cleaning operation.   It's natural based detergent product have an exceptional solvency power on soil & oily  matter. It is free from Hydrocarbon solvents , Biodegradable and minimizes the extreme hazards to personnel in handling materials.

Application

It can be used as a general purpose cleaner to remove oil and grease deposits.First of all flush the system with cold water to prevent evaporation rates and polymerization then the most economical method of using RXSOL-20-2015-025 is by direct injection followed by recirculation washing, using tank cleaning machines. Spraying Method  - Using LAC as delivered in drums, spray onto areas where residue remains following rough washing leave for 10-45 minutes (but do not allow to dry), then butterworth at maximum pressure and warm water 60oC for at least 3 hours, checking that there is no foam remaining in the final stages.  Inspects tanks(s) and if desired result has been achieved fresh water rinse and dry.

** Make sure to take all safety precautions are followed when handling / spraying RXSOL-20-2015-025

Injection Method – not applicable.

Dose

Refer to technical datasheet
LAC Liquid Alkaline Cleaner is low foaming cleaning detergent. LAC Tank Cleaner may be used by spray method, soak method, or Re-circulation cleaning methods. LAC Liquid Alkaline Cleaner is a silcate based low foam cleaning liquid with a chartacteristic odor. 

Technical specifications
  • Removes grease, oil, carbon deposits, soil and grime.
     
  • Keeps loosened deposits in suspension preventing re-deposition.
     
  • Low toxic.  , Non-flammable.
     
  • Free from hydrocarbon solvents.
     
  • Effective and economical in use , Water-based cleaner.
     
  • RXSOL-20-2015-025 has numerous cleaning applications including removal of greases, waxes,
     
  • oil, sludge, soot, carbon   deposits and general dirt and grime.
     
  • Non-corrosive to ferrous metals.  Suitable for all tank-coatings.
     
  • Can be used for gas and hydrocarbon freeing of tanks.
     
  • Can be used for deodorizing
     
  • Contains wetting agents.


NOTE : Acts as an acid-neutralizing agent.

Note

Re-circulation Method :
Fill tank with fresh water and heat up to warm 50 oC .IF a drop line is available on the tank line system, then start to circulate the water and add the required amount of Caustic flakes and LAC to make a 2.5% solution.  A stronger solution can be made, but be advised that too much Caustic and too high temperature will result in white powder all over the tank.  Under normal circumstances, between 2.5% and 4.5% will be sufficient strength.  If there is no drop line, then lower butterworth hoses into the tank from the pump stack header without machines attached and circulate through these hoses while you fill the solution material.

* Use a strainer at the pump stack when circulating any solution.*
  Tank Lining – Stainless / Epoxy / Phenolic

 

ALKALINE. SAFE. EFFECTIVE.
KEY FEATURES

RXSOL-20-2015-025 is well-balanced alkaline cleaner with integrated water softeners. Free from hydrocarbon solvents, making it gentle and suitable for tank cleaning operations. It is a high-strength alkaline degreaser, ideal for softening and removing baked-on drying oils, and is especially effective after cleaning animal fats, vegetable oils, fish oils, tall oils, tung oil, and similar residues.

The product is low in toxicity and offers exceptional solvency power for removing soil and oily contaminants.

  • Powerful Alkaline Cleaner - Effectively removes heavy grease, baked-on oils, and tough organic residues
  • Hydrocarbon-Free Formula - Free from harmful solvents - safe for sensitive environments and operators
  • Safe for Tank Cleaning - Gentle yet highly effective for marine, industrial, and food-grade tank cleaning operations
  • Effective on Multiple Oil Types - Removes animal fats, vegetable oils, fish oils, tall oil, tung oil, and more
  • Built-in Water Softener - Ensures consistent cleaning performance even in hard water conditions

 

Remarks / Precaution

LAC Liquid Alkaline Cleaner is a blend of Silicate, alkaline detergents, water conditioners, and biodegradable wetting and penetrating agents.


We are LAC Alkaleen liquid Tank Cleaners manufacturers in india. And holding no-1 position for LAC Alkaleen liquid Tank Cleaners suppliers in kandla, mundra, chennai, ennore, vizag, kakinada, jnpt, manglore, kolkata, haldia, paradip, dubai, fujairah, sharjah.  Alkaleen Liquid Heavy Duty concentration makes surface clean easily and effectively.

MSDS

Product Name                 RXSOL-20-2015-025
Product Type Lac Alka Liquid HD  Industrial and Institututional cleaner

Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Stock Point : Mumbai, Kandla, Kolkata, Chennai, Surat, Vizag, Fujairah, Muscat Barka, Nairobi

Phone +91 22 65113333 / 5555 / 9999 / 27611360
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email mail@rxmarine.com

Alkaline cleaner Declaration according to recommendation 89/542/EEG.

Blend of SURFACTANT ANIONIC NON-IONIC, LAB

Proprietory Blend

40-50
Butoxydiglycol  112-34-5  1-5

Sodium Nitrite 

7632-00-0

0.1-1

C9-11 Pareth-6  

68439-46-3 1-5

Butoxyethanol

111-76-2 

1-5
Sodium Xylenesulfonate   1300-72-7 1-5
Sodium Hydroxide  1310-73-2  1-5
Tetrasodium EDTA  64-02-8  0.1-1
CI 15620   1658-56-6 0.1
Sodium Metasilicate 6834-92-0 2 - 5

Environmental Hazards

None

Human Health  Hazards

Moderates

R 35:Causes skin burning effects
                                                                                                   

Inhalatin

Harmful,. supply or remove to fresh air and seek medical advice attention.

Skin Contact

Rinse with running water and soap. Skin care. Remove contaminated clothes.

Eye  Contact

Flush with running water for at least 15 minutes Immediately.

Ingestion

Vomiting is dangerous , seek medical attention.

Non Combustible Porduct

Suitable

N.A. can use  foam dry Co2 , water-spray.

Not suitable

Not applicable

Special

Not applicable

Protection of fire Fighter

Not applicable  

Special protective equipment for fire-fighters:  Wear protective equipment.

Enviromentel Precaution

Direct flow into drainage system, surface or ground water is  prohibited.

Cleaning Method

Flush Spill Area with Water and remove with liquid-absorbing material like foam sand, sawdust etc..

Condition to Avoid

Non-flammable but avoid direct heating

Materials  to Avoid

Do not subject to Acidic / Oxidizing Agents

Handling

Keep Container Tightly Closed

Note:Eyewash facilities require at workplace The product causes corrosion on skin and mucous membranes Pl. Note that In case of discharge of acidic or alkaline products into the sewerage system the pH must be in the range of 6-10 since higher or lower pH values may damage the sewerage system or impair biological dosage treatment plants. So that for maintaining pH we have to add acidic / basic medium neutaliser . For example if pH is less than 6 basic neutraliser is required and if pH is more than 10 acidic nature neutraliser is required. For details of any guideline pl. Visit our technical website www.rxmarine.com
•Dilute in water (always use plastic jar and RXSOL should be added to  water  never add water to RXSOL.)
 

Personal protection :

Respiratory System Protection 

Approved respirator must be worn when spraying

Eye Protection

Cear eye protection (on possibility of contact )

Hand protection

Cear PVC chemical resistance protective glove

 Product Properties:

Appearance

Pale clear liquid   

Density

In g/cm3 at 20°C: 1.21  

Compatibility    

 

Metal

No known effect

Rubber

No known effect   

pH  

Alkaline ( 13 )

Flashpoint

Not Applicable  

Solubility

100% soluble in water 

Packaging 

Size (in Litres)

Hazardous Decomposition Products

Do not occur if stored and used as directed. n FIRE combustion CO, CO2 , NH3 , SOX etc hazardous gas produced

NOTE : Avoid Contact With Acid

  Comment -  Not applicable , Emulsifies in water

95 % added surfactants are biodegradable as per by international regulation. This material must be disposed of with local national regulations.

As per guideline of local rules and regulation and before disposal and neutralization pl. refer 07 article.

Proper Shipping Name
UN        
  Proper Shipping Name

Sodium hydroxide, solution

  UNNo. 1824    
  Hazard Class 8 PackingGroup II
Road/Rail(ADR/RID)
  Proper Shipping Name

Sodium hydroxide, solution

  ADR UN No. 1824    
  ADR Hazard Class 8 Tremcard

80S1824

Sea(IMDG)

  Proper Shipping Name

Sodium hydroxide, solution

  IMDG UN No. 1824    
  IMDG Hazard Class. 8 IMDG Pack Group. II
  IMDG EmS F-A, S-A IMDG subrisk

N/A

  IMDG Labels

8

IMDG Flash point

N/A

Air(ICAO/IATA)

  Proper Shipping Name

Sodium hydroxide, solution

  ICAO Un No. 1824    
  ICAO Hazard Class 8 ICAO Packing Group. II
  ICAO subrisk

N/A

ICAO Labels

8, CAO

  ICAO Flashpoint N/A    

DOT/ CFR (US Department of Transportation)

  DOT Proper Shipping Name

Sodium hydroxide, solution

  Hazardous Material

Sodium hydroxide

   
  Hazard Class 8 Identification Number UN 1824
  Product RQ (lbs) 3640 DOT subrisk N/A
  DOT Labels 8 DOTFlashpoint 

N/A




 Classification and labelling according to Chemicals Hazard Information and Packaging Regulations (CHIP). Symbols of danger:- C Corrosive

R phrases

R 35: Causes severe burns

S-phrases

S2: Keep out of reach of children S26: In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S28: After contact with skin, wash immediately with plenty of water. S37/39: Wear suitable gloves and eye/face protection.



This information is based on our current level of knowledge and relates to the product in the state in which it is delivered. It is intended to describe our product from the point of view of safety requirements and is not intended to guarantee any particular properties    

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.                                                                 
 

Need a quote for this product?

Tell us the grade, packing and quantity you need — we ship across India and to major ports.

Request a quote office@kolkatachemical.com