Hypersolve -SS Rx is a solvent degreaser based on npropyl bromide as an alternative for traditional Chlorinated solvents. Hypersolve SS Rx has physical properties and cleaning efficacy similar to that of Trichloroethylene (TCE). Hypersolve -SS Rx has a very low ozone depletion potential (0.002) and no flash point. Solvency, handling and drying characteristics are similar to TCE. Applications include metal, electronic, and precision cleaning, cold cleaning and vapor degreasing a variety of contaminants and substrates.Hypersolve -SS Rx cleans difficult contaminants such as oils, greases, adhesives, solder fluxes, and resins.
This product has many application. Some of them as below -
- Adhesive and sealant removal
- Asphalt Extractions (Bituminous Asphalt)
- Automotive parts cleaning
- Carbon soil removal
- Cleaner/degreaser
- Drying agent
- Metal cleaning, hydraulic parts, wheels and brakes
- Non-destructive Inspection
- Precision cleaning
- Printed wiring board cleaning
- Surface wipe cleaning
| Form | Liquid |
| Colour | Colourless |
| Odour | Ethereal and Faintly Sweetish |
| Boiling point | 160° F (71oC) |
| Flash Point | Tag Closed Cup None |
| Percent Volatile | 100% |
| Solubility in Water | 0.25 g/100 g water |
| Specific Gravity | 1.35 @ 25° C |
| VOC Content | 1350 gm/L |
| Vapor Density | (Air=1) ~4.3 |
| Vapor Pressure | 111 mmHg @ 20°C |
Benefit :
- Cleaning performance – ability to remove a broad range of soils with wide applicability
- Compatibility – Minimal production impact and little or no new capital investment with existing equipment and processes.
- Environmentally Friendly – Low ODP, GWP.
- No Flash Point – No flash point exhibited by standard ASTM procedures.
- Metals Compatibility – Properly stabilized, the cleaner is un-reactive toward metals like aluminum, magnesium, titanium, and brass.
- Rapid Drying – Quick dry-to-dry cycle. Can function as a rinse/drying agent for slow drying hydrocarbon solvents.
- Low Solvent Loss – Low latent heat of vaporization allows rapid drying combined with low solvent loss through evaporation.
- Hydrolytic Stability – HyperSolve is stable in the presence of contamination by water a common problem in vapor degreasing operations.
-
Recyclable – Ease of solvent recycle helps reduces costly solvent disposal and increases efficiency.
Safety and Handling Precautions
Good ventilation is a must. Use self contained breathing apparatus if above TLV. Solvent resistant gloves and safety glasses, with splash protection, are required. All used and unused product should be disposed of in conformance with local, state and federal regulations. Keep out of reach of children. Treat this chemical with respect and follow all MSDS instructions.
| Product Name | Hypersolve - SS Rx |
| Part Number | RXSOL-10-4190-025 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Sikka, Dahej, Hazira, JNPT, Goa, Mangalore, Cochin, Tuticorin, Chennai, Kakinada, Vizag, Paradip, Kolkata, UAE, Singapore.
| Phone | +91 22 27815540 / 41 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| 123@rxmarine.com | |
| Website | www.rxmarine.com |
| Component | CAS-No. | Weight % | Exposure |
| n - Propyl Bromide | 106-94-5 | >95% | OSHA -PEL – N/E MREL – 100 PPM 8 hr. TWA* |
| 1,2 - Butylene Oxide | 106-88-7 | 1% | ACGIH-TLV-TWA – N/E OSHA-PEL-TWA – N/E |
| Dimethoxymethane | 109-87-5 | 5% | Y (Hazardous) OSHA-PEL-TWA - 1000 ppm ACGIH TLV TWA -1000 ppm |
| t - Butanol | 75-65-0 | 5% | Y (Hazardous) OSHA-PEL-TWA - 100 ppm ACGIH TLV TWA -100 ppm |
| Flash Point (Method) | None (TCC) |
| Flammable Limits |
LEL ~3.8% |
| Extinguishing Media: | All conventional media are suitable. |
| Special Fire Fighting Procedures: | Keep fire exposed containers cool with water. Fire fighters should wear self-contained breathing apparatus with a full face piece operated in the positive pressure demand mode with appropriate gear and chemical resistant personal protective equipment. |
| Unusual Fire & Explosion Hazards | Material forms a flammable mixture with air in a narrow flammability range (3.8% – 7.5%. by volume). Containers exposed to flame or high heat may explode. In fire, toxic gases may be released. Use water to cool containers exposed to fire. |
| Ingestion | Seek medical attention immediately. If individual is drowsy or unconscious, do not give anything by mouth; place individual on left side with head down. If unconscious, give 1-2 glasses of water. Contact medical facility or poison control center for advice on whether to induce vomiting. |
| Inhalation | Remove to fresh air. If breathing is difficult, give oxygen.If breathing has stopped, perform artificial respiration. Keep person warm and quiet. Seek medical attention. |
| Eyes | Irrigate immediately with water for at least 15 minutes. Get medical attention if irritation persists. |
| Skin | Wash with soap and water. Thoroughly clean contaminated clothes and shoes before re-use. If symptoms persist, seek medical attention. |
| Carcinogen |
NTP – Not Listed IARC Monographs – None OSHA REGS – NOT REGULATED |
| Flash Point (Method) | None (TCC) |
| Flammable Limits |
LEL ~3.8% UEL ~7.5% |
| Extinguishing Media |
All conventional media are suitable. Special Fire Fighting Procedures: Keep fire exposed containers cool with water. Fire fighters should wear self-contained breathing apparatus with a full face piece operated in the positive pressure demand mode with appropriate gear and chemical resistant personal protective equipment. |
| Unusual Fire & Explosion Hazards | Material forms a flammable mixture with air in a narrow flammability range (3.8% – 7.5%. by volume). Containersb exposed to flame or high heat may explode. In fire, toxic gases may be released. Use water to cool containers exposed to fire. |
| Small Spill |
Absorb liquid on vermiculite, floor absorbent, or other inert absorbent material and place in suitable labeled containers for disposal. |
| Large Spill |
Ventilate contaminated area. Eliminate all ignition sources, (flares, flames including pilot lights, electrical sparks). Persons not wearing protective equipment should be excluded from area of spill until clean up has been completed. Stop spill at source. Prevent from entering drains, sewers, streams, etc. If runoff occurs, notify authorities as required. Pump or vacuum transfer spilled product to clean containers for recovery. Transfer contaminated absorbent, soil and other materials to containers for disposal. |
| Waste Disposal Method | HYPERSOLVE™ may be disposed of as an industrial waste in a manner acceptable to good waste management practices and in compliance with applicable local, state and federal regulations. |
| Precautions To Be Taken In Handling & Storing | Materialn should be stored in a cool, dry, well-ventilated area. Aerosol containers may explode when exposed to temperatures at or above 1200F. Since empty containers retain product residues, all hazard precautions given in the data sheet must be observed. All metal pails or drums should be grounded and/or bonded when material is transferred. Any use of this product in elevated temperature processes should be thoroughly evaluated to establish and maintain safe operating conditions. Sudden release of hot organic chemical vapors or mists from process equipment operating at elevated temperatures may result in ignition. Keep containerstightly closed. |
| Other Precautions | Keep this and all chemicals out of the reach of children. |
| HMIS Information: |
Health – 2 / Reactivity – 0 Flammability – 1 Personal Protection – X |
| HMIS Definition |
0 – Minimal 1 – Slight 2 – Moderate 3 – Serious 4 – Extreme “/” in the Health Category denotes material does not target any major organs. “*” in the Health Category denotes material may target certain organs. Personal Protection “X” means “Ask your safety specialist for handling instructions. . |
| Eye Protection | Chemical safety glasses and splash protection required. |
| Protective Gloves | Viton or Norfoil are recommended (contact your local glove supplier.) Nitrile or butyl rubber provide splash protection only. |
| Respiratory Protection | Not required under conditions of normal use when ventilation is adequate. If vapor mist is present, use NIOSH certified organic vapor mask. |
| Ventilation |
Local exhaust/hood or fan may be used; adequate vent lation is extremely important. Other Protective Clothing: None required under normal use. Work Practices: All equipment should be grounded. Proper ventilation is required. Avoid breathing concentrated vapors/fumes. Treat this chemical with respect and follow all MSDS instructions. |
| Primary Routes of Exposure | Oral, Inhalation, & Skin |
| Ingestion | Swallowing large amounts may be harmful by causing gastrointestinal irritation. |
| Inhalation | Breathing large amounts may be harmful by causing nose, throat, and respiratory tract irritation and affecting the central nervous system by causing drowsiness, dizziness, and/or possible unconsciousness. Chemical burns are possible. |
| Eyes | Irritant. Liquid contact will irritate eyes and may cause stinging, tearing, and redness. Chemical burns are possible. |
| Skin or Contact | May cause mild irritation of redness and burning. Chemical burns are possible. |
|
May aggravate pre-existing diseases of the skin, liver, kidney and respiratory system. |
Long-term overexposure may cause effects of the lung, kidney, liver, urinary blood, bone marrow, heart, eye, nervous and reproductive systems. |
| Notes |
This material is a halogenated alkane. Long term overexposure, (without adequate ventilation and/or protective equipment), may cause lung, kidney, liver, urinary, blood, bone marrow, heart, eye, central nervous system, reproductive and fertility effects. The minor ingredient, 1,2-butylene oxide is classified by IARC as a Group 3 material, which exhibits limited evidence of carcinogenicity in experimental animals and no human data. |
Gloves Suit
| Appearance & Odor | Clear, colorless liquid with characteristic odor. |
| Initial boiling point and boiling range | 160° F (71o C) |
| Evapouration rate | (nBuAc=1): 6.0 |
| Percent Volatile | 100% |
| Vapour pressure | 111 mm Hg @ 20°C |
| Vapour density | ~4.3 |
| Specific Gravity | 1.35 |
| Solubility | .25g /100 ml @ 20ºC |
| Stability | Stable |
| Conditions to avoid |
Sources of ignition such as sparks, hot spots, welding, flames and cigarettes. Ignition/flash may result if concentration of product is in the flammable range. (See section IV for LEL and UEL values.) |
| Incompatible materials | Not compatible with certain plastics and rubber. Test all non-metals prior to use. Avoid strong oxidizers, acids and bases, acid chlorides, and anhydrides. |
| Hazardous decomposition products | May form hydrogen bromide, and oxides of carbon. |
| Hazardous Polymerization | Will not occur. |
| Product Information | Oral LD50 Category 3. ATE = 50 - 300 mg/kg. Dermal LD50 Category 3. ATE = 200 - 1000 mg/kg. Vapor LC50 Category 3. ATE = 2 - 10 mg/l. |
| Toxicologically Synergistic Products | No information available |
| Irritation | Causes burns by all exposure routes. |
| Sensitization | May cause sensitization by skin contact |
| Carcinogenicity | The table below indicates whether each agency has listed any ingredient as a carcinogen. |
| Mutagenic Effects | Mutagenic effects have occurred in humans. |
| Reproductive Effects | Experiments have shown reproductive toxicity effects on laboratory animals. |
| Developmental Effects | Developmental effects have occurred in experimental animals. Component substance is listed on California Proposition 65 as a developmental hazard. |
| Teratogenicity | Teratogenic effects have occurred in experimental animals. |
| STOT | Single exposure Respiratory system Central nervous system (CNS) Optic nerve |
| STOT | Repeated exposure Kidney Liver Heart spleen Blood |
| Aspiration hazard | No information available |
| Symptoms / effects,both acute and delayed | Symptoms of overexposure may be headache, dizziness, tiredness, nausea and vomiting: Product is a corrosive material. Use of gastric lavage or emesis is contraindicated. Possible perforation of stomach or esophagus should be investigated: Ingestion causes severe swelling, severe damage to the delicate tissue and danger of perforation: Symptomsof allergic reaction may include rash, itching, swelling, trouble breathing, tingling of the hands and feet, dizziness, lightheadedness, chest pain, muscle pain or flushing |
| Endocrine Disruptor Information | No information available |
| Other Adverse Effects | The toxicological properties have not been fully investigated. |
| Ecotoxicity | Do not empty into drains. The product contains following substances which are hazardous for the environment. |
| Persistence and degradability | Miscible with water Persistence is unlikely based on information available. |
| Bioaccumulative potential | No information available. |
| Mobility in soil | Will likely be mobile in the environment due to its water solubility. |
| Waste Disposal Methods | Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. Chemical waste generators must also consult local, regional, and national hazardous waste regulations to ensure complete and accurate classification. |
DOT
| UN number | UN1198 |
| UN proper shipping name | FORMALDEHYDE SOLUTIONS, FLAMMABLE |
| Hazard Class | 3 |
| Subsidiary Hazard Class | 8 |
| Packing Group | III |
TDG
| UN number | UN1198 |
| UN proper shipping name | FORMALDEHYDE SOLUTIONS, FLAMMABLE |
| Hazard Class | 3 |
| Subsidiary Hazard Class | 8 |
| Packing Group | III |
IATA
| UN number | UN1198 |
| UN proper shipping name | FORMALDEHYDE SOLUTIONS, FLAMMABLE |
| Hazard Class | 3 |
| Subsidiary Hazard Class | 8 |
| Packing Group | III |
IMDG/IMO
| UN number | UN1198 |
| UN proper shipping name | FORMALDEHYDE SOLUTIONS, FLAMMABLE |
| Hazard Class | 3 |
| Subsidiary Hazard Class | 8 |
| Packing Group | III |
| TSCA 12(b) | Notices of Export Not applicable |
| SARA 313 | No data availble |
| SARA 311/312 Hazard Categories See section 2 for more information | Hazard Categories See section 2 for more information |
| CWA (Clean Water Act) | No data availble |
| Clean Air Act | No data availble |
| OSHA | Occupational Safety and Health Administration |
| CERCLA |
This material, as supplied, contains one or more substances regulated as a hazardous substance under the Comprehensive Environmental Response Compensation and Liability Act (CERCLA) (40 CFR 302) |
| California Proposition | 65 This product contains the following proposition 65 chemicals |
| U.S. Department of Transportation |
Reportable Quantity (RQ): Y DOT Marine Pollutant N DOT Severe Marine Pollutant N |
| Other International Regulations | Mexico - Grade Moderate risk, Grade 2 |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |