Hydrochloric Acid Lab Grade

HCl Lab Reagent
Category

Hydrochloric Acid 34% /  Extra Pure Hydrochloric Acid 36% Hydrochloric Acid 33% Exporter from Mumbai , India
Hydrochloric acid is an important and widely used chemical. The largest end uses for hydrochloric acid are steel pickling, oil well acidizing, food manufacturing, producing calcium chloride, and ore processing. 

Also used for catalyst regeneration, pH control, regeneration of ion exchange resins 

Application

Dose

Technical specifications

Product Specification:

Product Number:

258148

CAS Number:

7647-01-0

MDL:

MFCD00011324

Formula:

HCl

Formula Weight:

36.46 g/mol

 

TEST  Specification

Appearance (Clarity)

Clear

Appearance (Color)

Colorless

Appearance (Form)

Liquid

Free from Suspended Matter or Sediment Color Test

<_ 10 APHA

Titration with NaOH

<_ 0.01 ppm

Arsenic (As)

<_ 0.01 ppm

Bromide

<_ 0.005 %

Iron (Fe)

<_ 0.2 ppm

Heavy Metals (as Pb)

<_ 1 ppm

Sulfate

<_ 1 ppm

Residue on Ignition (ppm)

<_ 5 ppm

Extractable Organic Substance  Not Greater Than 5 ppm

Pass

Free Chlorine

<_ 1 ppm

Ammonium

<_ 3 ppm

Sulfite (ppm)

<_ 1 ppm

Meets ACS Requirements 10th Edition

Current ACS Specification

Storage Life

 3 Years

 
Note

Remarks / Precaution

First Aid

Eye Contact - The eyes should be immediately flushed with large amounts of water continuously for at least 15 minutes. Get immediate medical attention. It is necessary to hold the eyelids apart while flushing to ensure complete irrigation of the eye. Washing eyes within several seconds is essential to achieve maximum effectiveness. A delay of a few moments or incomplete washing can result in partial or permanent blindness. Never attempt to neutralize hydrochloric acid in the eyes with chemicals. Do not apply oils or ointments unless specifically prescribed by a physician.

Skin Contact - Flush the area of contact with large amounts of water. Contaminated clothing should be removed while underneath a safety shower. Get immediate medical attention. Do not attempt to neutralize the acid with alkaline solutions. No oils or ointments should be applied unless specified by a physician.

Inhalation Remove individual to fresh air and get immediate medical attention. In cases of severe exposure, humidified oxygen should be administered by someone medically trained to administer oxygen. If respiration or pulse has stopped, have a trained person administer Basic Life Support (Cardio-Pulmonary Resuscitation and/or Automatic External Defibrillator) and CALL FOR EMERGENCY SERVICES IMMEDIATELY.

Ingestion - Get immediate medical attention. If individual is a fully conscious, give large amount of water. Do not use sodium bicarbonate in an attempt to neutralize the acid. Do not induce vomiting. Never give anything by mouth to an unconscious person. 

Packing sizes
500 ml, 1 ltr, 2.5 ltrs.
MSDS

 

Product Name RXSOL-60-6257-500
Product Type Hydrochloric Acid 37%  Lab Grade

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Stock Point ::: Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Fujairah

Phone +91 22 65113333 / 5555 / 9999
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email mail@rxmarine.com

 

SARA 313 Component  CAS Number Percent Comp. Dimension
 
Exposure
 Limits
 
Hydrochloric Acid CAS# 7647-01-0 36.5-38%  W/W

OSHA PEL (C)      5 ppm, (C) 7
mg/mƒ

Water, Deionized ASTM Type II CAS# 7732- 18-5  62-63.5% W/W None
 Established  

Causes severe irritation and burns. May Be harmful if swallowed. Avoid breathing vapor or dust. Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling. Keep container closed.

Emergency Overview: Poison! Danger! Corrosive. Liquid and mist cause severe burns to all body tissue. May be fatal if swallowed or inhaled. Inhalation may cause lung damage.

Inhalation:Corrosive! Inhalation of vapors can cause coughing, choking, inflammation, of the nose, throat, and upper respiratory tract, and in severe cases, pulmonary edema, circulatory failure, and death.

Ingestion: Corrosive! Swallowing hydrochloric acid can cause immediate pain and burns of the mouth, throat, esophagus, and gastrointestinal tract. May cause nausea, vomiting, and diarrhea, and in severe cases, death.

Skin: Corrosive! Can cause redness, pain, and severe skin burns. Concentrated solutions cause deep ulcers and discolor of skin.

Eye Contact: Corrosive! Vapors are irritating and may cause damage to eyes. Contact may cause severe burns and permanent eye damage.

Chronic Exposure: Long-term exposure to concentrated vapors may cause erosion of teeth. Long- term exposures seldom occur due to the corrosive properties of the acid.

Aggravated by Exposure: Persons with pre-existing skin disorders or eye disease may be more susceptible to the Effects to this substance.

 

 

SKIN:

In case of contact, immediately flush skin with water for at least 15 minutes while removing contaminated clothing and shoes. Thoroughly clean clothing and shoes before reuse.

  EYES: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally.
Seek Medical Aid.
  INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen
  INGESTION  Give several glasses of milk or water. Vomiting may occur spontaneously, but DO NOT INDUCE! Never give anything by mouth to an unconscious person.

 

Fire Extinguisher Type:

Any means suitable for extinguishing
surrounding fire

Fire / Explosion Hazards: Thermal decomposition produces highly
 toxic fumes.
Fire Fighting Procedure: Wear self-contained breathing apparatus and protective
clothing to prevent contact with skin and clothing.

Evacuate area. Wear self-contained breathing apparatus and protective clothing. Dispose of in a manner consistent with federal, state, local regulations.

Ventilate area of Leak or Spill. Wear Appropriate Personal Protective Equipment as Specified in Section 8. Isolate Hazard Area. Keep Unnecessary and Unprotected Personnel from Entering. Contain and Recover Liquid when Possible. Neutralize with Alkaline Material (Soda- Ash, Lime), then Absorb with an Inert Material (e.g., Vermiculite,
Dry Sand, Earth), and place in a Chemical Waste Container. Do Not Use Combustible Materials, such as Saw Dust. Do Not Flush to Sewer! US Regulations (CERCLA) Require Reporting Spills and Releases to Soil, Water and Air in Excess of Reportable Quantities.

Store in a cool, dry, well-ventilated place away from incompatible materials. Wash thoroughly after handling.

 

Respiratory Protection

 NIOSH/MSHA-approved respirator

Ventilation  Local 
OTHER Mechanical

Protective Gloves

NIOSH Approved Gloves

EYE PROTECTION Goggles and Face
Shield
Other Protective Equipment Wear appropriate clothing to prevent skin exposure

  

BOILING POINT  51°C
VAPOR PRESSURE  160 mm Hg @ 70°F
 
MELTING POINT -114.3°C
VAPOR DENSITY  1.27
EVAPORATION RATE  Information not available
Appearance /Odors Colorless fuming liquid
Flash Point Information not available
Specific Gravity 1.19
Percent Volatile by >99%
Evaporation Standard  
Auto Ignition Temp

Not applicable

Lower Flamm. Limit in Air

Not applicable

Upper Flamm. Limit in Air Not applicable
Solubility in Water Soluble

 

STABILITY

Stable

CONDITIONS TO AVOID

Avoid contact with incompatible
materials.

MATERIALS TO AVOID

Metals, bases, amines, and water

HAZARDOUS DECOMPOSITION PRODUCTS

HCl fumes and Hydrogen gas

HAZARDOUS POLYMERIZATION

will not occur
Conditions to Avoid  None known

Carcinogenic References: Hydrogen Chloride - IARC Category 3, NTP Carcinogen - Known:
No

Environmental Fate: When Released into the Soil, this Material is Not Expected to Biodegrade.
When Released into the Soil, this Material may Leach into Groundwater.

Environmental Toxicity: This material is expected to be toxic to aquatic life.

Whatever cannot be saved for recovery or recycling should be handled as hazardous waste and
sent to a RCRA approved waste facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.

DOT Classification: UN1789, Hydrochloric Acid, 8, PG II

DOT Regulations may change from time to time. Please consult the most recent D.O.T. regulations.

Chemical Inventory Status –
Part 1:Ingrdient
Hydrogen Chloride (7647-01-0)
Water (7732-18-5)
TSCA     Yes       YES
EC          Yes       YES
Japan      YES     YES
Australia  Yes      YES

Chemical Inventory Status –
Part 2:Ingredient
Hydrogen Chloride (7647-01-0)
Water (7732-18-5)
Korea     Yes     YES
DSL        Yes     YES
NDSL      No       NO
Phil.         Yes     YES

Federal, State & International Regulations –
Part 1: Ingredient.
Hydrogen Chloride (7647-01-0)
Water (7732-18-5)
RQ         5000      No
TPQ         500      No
List          YES      NO
Chemical Catg    No   NO

Federal, State &
International Regulations –
Part 2:Ingredient
Hydrogen Chloride (7647-01-0)
Water (7732-18-5)
CERCLA         5000      NO
261.33              No       NO
8(d)                   No       NO

Chemical Weapons Convention: No
TSCA 12 (b):No
CDTA: YES MIXTURE/LIQUID
SARA 311/312: Acute:YES
Chronic: YES
Fire: No
Pressure: No
Reactivity: No
Australian Hazchem Code: 2R
Poison Schedule:NONE ALLOCATED

Conditions aggravated/target organs: Corrosive! Severe exposure may be fatal. Acute: Severe burns to eyes, skin, respiratory system,GI tract. Chronic: Dermatitis, eye damage, lung damage.

                                                              Flammability

Health                                                                                                      Reactivity

                                                                                         

Revisions

  NFPA
 
 7/30/2010  0.1  updated msds to 16 section from 10 section msds. STN
 
  0

The information herein is believed to be accurate and is offered in good faith for the user's consideration and investigation. No warranty either expressed or implied is made for the completeness or accuracy of the information whether originating from the above mentioned company or not. Users of this material should satisfy themselves by independent investigation of current scientific and medical knowledge that the material

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Need a quote for this product?

Tell us the grade, packing and quantity you need — we ship across India and to major ports.

Request a quote office@kolkatachemical.com