General Purpose Cleaner 1 Ltr

General Purpose Cleaner provides maximum regulatory compliance without performance compromises. It is best for applications that will not allow butyl, but demand performance and versatility. Formulated with a special polymer that keeps dirt and greas
Category

General Purpose Cleaner provides maximum regulatory compliance without performance compromises. It is best for applications butyl based cleaner doesn't allow but demand performance and versatility. Formulated with a special polymer that keeps dirt and greasy soils from returning to surfaces. General Purpose Cleaner even approaches the cleaning performance of many aqueous cleaners containing butyl. 

Application

It is strong enough to attack and remove tough dirt, dust and grime deposits. Yet its moderate pH formula, biodegradability and zero VOC content make it versatile and safe enough to use daily for all your cleaning tasks. General Purpose Cleaner is non-corrosive (pH < 11.0), biodegradable, concentrated, nonabrasive, safe on most plastics, non-flammable, industrial strength, non-ozone depleting, floor wax safe (when diluted). Contains no phosphates, ammonia or bleach, and is NSF registered category code A1 for use in federally inspected meat & poultry plants.


Specifications 


NSF Registration# 138267, Category Code A1, for use in meat and poultry plants.

 

CONCENTRATED CLEANING FORMULA
 

Concentrated Solution is a biodegradable, caustic-free alkaline cleaner formulated for heavy duty industrial use. It removes oils and a variety of soils from surface. Compatible with aluminum and aluminum alloys as well as copper, brass, and steel substrates. It is particularly effective for removing fabricating oils, cutting oils, and polishing oils.

Dose

Directions


Use full strength or dilute with water.
Before applying, pre-test on a hidden section of surface to be cleaned for color fastness and surface integrity.
Soak, pre-wash, sponge or apply directly to pre-tested surface.
Allow General Purpose Cleaner to penetrate the soil.
Wipe or rinse clean with water or a damp sponge.

Note ::: FOR HEAVY DUTY DEGREASING WHERE BUTYL IS ALLOWED: Our recommends the use of Industrial Strength Cleaner/Degreaser or  All Purpose Cleaner/Degreaser.

MSDS

Product Name
 

 General Purpose Cleaner 1 Ltr

Product Type
 

 RXSOL-10-1701-001

Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Phone +91 22 65113333/ 5555 / 9999 / 27611360 / 27815540
Fax +91 22 2781 1318 :::AOH :0091 9322594669
Email mail@rxmarine.com

Ingredient(s) CAS #                 Weight %                  LD50 Oral - Rat mg/kg) LD50 Dermal -Rabbit LC50 Inhalation -Rat
Alcohol ethoxylates 68439-46-3 10 - 20% 1400 >2 g/kg Not available
Hydrogen peroxide 7722-84-1 1 - 5% 801 2000 mg/kg  2 mg/L (4 h)

EMERGENCY OVERVIEW
CAUTION. CAUSES EYE IRRITATION. MAY BE MILDLY IRRITATING TO SKIN.
 
Principal routes of exposure  : Skin contact. Inhalation. Eye contact.
Eye contact : Moderately irritating to the eyes.
Skin contact : May be mildly irritating to skin.
Inhalation : None known.
Ingestion : May cause irritation to mouth, throat and stomach.

Eye contact
 

:
 

Flush immediately with plenty of water. If irritation persists, get medical attention.

Skin contact
 

:
 

Flush immediately with plenty of water. If irritation develops, get medical attention.

Inhalation

:

No specific first aid measures are required.

Ingestion

:

If swallowed, give a cupful of water or milk.

Aggravated Medical Conditions

:

None known.

Suitable extinguishing media

:
 

The product is not flammable. Extinguish fire using agent suitable for surrounding fire.

Specific hazards

:

Decomposition releases oxygen, which may intensify fire .

Unusual hazards

:

None known.

Specific methods

:

No special methods required.

Special protective equipment for firefighters
 

:

 

As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.

Extinguishing media which must not be used for safety reasons

:
 

No information available.

Personal precautions        

:

Not relevant for the product itself.

Environmental precautions and clean-up methods
 

:

 

Absorb spill with inert material (e.g. dry sand or earth), then place in a chemical waste container. Clean-up methods - large spillage. Use a water rinse for final clean-up.

Handling
 


:

 

Avoid contact with skin, eyes and clothing. Wash thoroughly after handling. FOR COMMERICAL AND INDUSTRIAL USE ONLY.

Storage
 

:
 

Protect from freezing. Keep tightly closed in a dry, cool and well-ventilated place. KEEP OUT OF REACH OF CHILDREN.

Engineering measures to reduce exposure

:
 

No special ventilation requirements General room ventilation is adequate

Personal Protective Equipment

 

Eye protection

:

No special requirements under normal use conditions.

Hand protection

:

No special requirements under normal use conditions

Skin and body protection

:

No special requirements under normal use conditions.

Respiratory protection

:

No special requirements under normal use conditions.

Hygiene measures

:
 

Handle in accordance with good industrial hygiene and safety practice

 

Ingredient(s) CAS # ACGIH OSHA Mexico
Hydrogen peroxide 7722-84-1 1 ppm (TWA)  1 ppm (TWA)
1.4 mg/m3 (TWA) 
2 ppm (STEL) 3 mg/m3 (STEL)
1 ppm (TWA) 1.5 mg/m3 (TWA)

Physical State : Liquid
Appearance : Liquid
Specific gravity : 1.026
Vapor density : No information available
Boiling point/range : Not determined
Decomposition temperature : Not determined
Solubility : Completely Soluble
Solubility in other solvents : No information available
Partition coefficient (n-octanol/water) : No information available
Elemental Phosphorus : 0 % by wt.
pH : 2.0
Explosion limits : Upper: Not determined - lower: Not determined
Bulk density : No information available
Evaporation Rate : No information available
Color : Clear Colorless
Odor : No Odor/Odorless
Melting point/range : Not determined
Autoignition temperature : No information available
Density : 8.56 lbs/gal 1.026 Kg/L
Flash point : > 200 °F > 93.4 °C
Viscosity : No information available
VOC : 0 % *
Dilution pH : 6.2 @ 1:64

Stability : The product is stable
Polymerization : Hazardous polymerization does not occur
Hazardous decomposition products : Oxygen.
Materials to avoid : Bases . Reducing agents.
Conditions to avoid : Do not freeze. Do not mix with any other product or chemical .

Acute toxicity
 

:
 

Oral LD50 estimated to be greater than 5000 mg/kg. Dermal LD50 estimated to be > 2000 mg/kg.

Component Information

:

See Section 3

Chronic toxicity

:

None known

Specific effects

:

 

Carcinogenic effects

:

None known

Mutagenic effects

:

None known

Reproductive toxicity

:

None known

Target organ effects

:

None known

Environmental Information :  No data available                                 

Waste from residues / unused products  
 

:

 

Undiluted product is regulated under environmental and transportation laws as a corrosive waste. Dispose of according to all federal, state and local applicable regulations

RCRA Hazard Class:

:

D002

DOT/TDG/IMDG
 

:
 

Please refer to the Diversey HazMat Library, http://naextranet.diversey.com/dot/,for up to date shipping information.

DOT Bill of Lading Descriptio
 

:
 

CLEANING, WASHING, BUFFING, OR POLISHING COMPOUNDS LIQUID

IMDG Bill of Lading Description

:
 

CLEANING, WASHING, BUFFING, OR POLISHING COMPOUNDS LIQUID

 

International Inventories at CAS# Level
All components of this product are listed on the following inventories: U.S.A. (TSCA), Canada (DSL/NDSL).

U.S. Regulations
California Proposition 65:
 This product is not subject to the reporting requirements under California's Proposition 65

RIGHT TO KNOW (RTK)
Ingredient(s) CAS # MARTK: NJRTK: PARTK: RIRTK:
Sodium xylene sulfonate 1300-72-7        
Alcohol ethoxylates 68439-463        
Hydrogen peroxide 7722-84-1        
Water 7732-18-5        
CERCLA/ SARA
Ingredient(s) CAS # Weight % CERCLA/SARA RQ (lbs) Section 302 TPQ (lbs) Section 313
Hydrogen peroxide 7722-84-1 1 - 5%   1000  

 

SARA 311/312 Hazard Categories
Immediate :  x
Delayed :  -
Fire :  -
Reactivity :  -
Sudden Release of Pressure :  -
Canada :  -
WHMIS hazard class :  D2B Toxic materials

Text of R and S phrase codes used in this safety data sheet:- R34: Causes burns; R36: Irritating to eyes; R37:Irritating to respiratory system; R41: Risk of serious damage to eyes. The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications usage in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from manufacturer.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Need a quote for this product?

Tell us the grade, packing and quantity you need — we ship across India and to major ports.

Request a quote office@kolkatachemical.com