RXSOL GTC 1000 GAS TURBINE CLEANER is a concentrated, neutral, environmentally friendly, biodegradable, waterbased detergent cleaning fluid for cleaning and corrosion inhibition of gas turbine compressors. One operation cleans and protects the engine -and also inhibits corrosion.
Blend of non-ionic surfactants, corrosion inhibitors, organic solvents and demineralised water.
Gas Turbine Compressor Cleaning.
CRANK WASH COMPRESSOR CLEANER
BALANCED BLEND OF SOLVENTS, SURFACTANTS, LUBRICANTS AND CORROSION INHIBITORS TO CLEAN COMPRESSOR BLADES OF INDUSTRIAL MARINE AND AVIATION GAS TURBINE ENGINES WHILE THE ENGINE REMAIN AT NORMAL SPEED AND LOAD.
By spray ring or lance in either starter-driver (off-line) or fired (on-line) wash as directed by the engine manufacturers, in the quantities recommended in the engine manual. It is essential during hot wash that the cleaner should leave as little ash residue as possible to avoid blocking turbine blade cooling holes. RXSOL GTC 1000 GAS TURBINE CLEANER has a maximum ash content of <0.01%, as part of the compliance with OEM specifications for compressor washing fluid.
The unique corrosion inhibitor allows engines to be left ready for an instant restart, even in salty offshore conditions.
|
pH |
: |
7.5 - 8.5 |
|
Specific gravity |
: |
1.01 |
|
Total alkali metals |
: |
<0.5ppm after dilution |
|
Ash |
: |
<0.01% |
|
Aromatic compounds |
: |
None |
|
Alkyl phenol ethoxylates |
: |
None |
|
Halogens (measured as total Chlorine) |
: |
<10 ppm for concentrate |
|
pH |
: |
7.5 - 8.5 |
|
Specific gravity |
: |
1.01 |
|
Total alkali metals |
: |
<0.5ppm after dilution |
|
Ash |
: |
<0.01% |
|
Aromatic compounds |
: |
None |
|
Alkyl phenol ethoxylates |
: |
None |
|
Halogens (measured as total Chlorine) |
: |
<10 ppm for concentrate |
|
pH |
: |
7.5 - 8.5 |
|
Specific gravity |
: |
1.01 |
|
Total alkali metals |
: |
<0.5ppm after dilution |
|
Ash |
: |
<0.01% |
|
Aromatic compounds |
: |
None |
|
Alkyl phenol ethoxylates |
: |
None |
|
Halogens (measured as total Chlorine) |
: |
<10 ppm for concentrate |
|
pH |
: |
7.5 - 8.5 |
|
Specific gravity |
: |
1.01 |
|
Total alkali metals |
: |
<0.5ppm after dilution |
|
Ash |
: |
<0.01% |
|
Aromatic compounds |
: |
None |
|
Alkyl phenol ethoxylates |
: |
None |
|
Halogens (measured as total Chlorine) |
: |
<10 ppm for concentrate |
|
pH |
: |
7.5 - 8.5 |
|
Specific gravity |
: |
1.01 |
|
Total alkali metals |
: |
<0.5ppm after dilution |
|
Ash |
: |
<0.01% |
|
Aromatic compounds |
: |
None |
|
Alkyl phenol ethoxylates |
: |
None |
|
Halogens (measured as total Chlorine) |
: |
<10 ppm for concentrate |
|
pH |
: |
7.5 - 8.5 |
|
Specific gravity |
: |
1.01 |
|
Total alkali metals |
: |
<0.5ppm after dilution |
|
Ash |
: |
<0.01% |
|
Aromatic compounds |
: |
None |
|
Alkyl phenol ethoxylates |
: |
None |
|
Halogens (measured as total Chlorine) |
: |
<10 ppm for concentrate |
|
pH |
: |
7.5 - 8.5 |
|
Specific gravity |
: |
1.01 |
|
Total alkali metals |
: |
<0.5ppm after dilution |
|
Ash |
: |
<0.01% |
|
Aromatic compounds |
: |
None |
|
Alkyl phenol ethoxylates |
: |
None |
|
Halogens (measured as total Chlorine) |
: |
<10 ppm for concentrate |
|
pH |
: |
7.5 - 8.5 |
|
Specific gravity |
: |
1.01 |
|
Total alkali metals |
: |
<0.5ppm after dilution |
|
Ash |
: |
<0.01% |
|
Aromatic compounds |
: |
None |
|
Alkyl phenol ethoxylates |
: |
None |
|
Halogens (measured as total Chlorine) |
: |
<10 ppm for concentrate |
Appearance
Clear pale straw coloured liquid with a mild pleasant odour.
Solubility
Completely soluble in water. No agitation required.
Compatibility
Not corrosive or detrimental to any of the materials normally used in gas turbine engines or aircraft components. No adverse effect on synthetic turbine oils.
| Product Name | RXSOL-16-1927-210 |
| Product Type | RXSOL GTC 1000 GAS TURBINE CLEANER |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Kolkata, Vizag, Chennai, Fujairah, Muscat, Nairobi
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| care@rxmarine.com |
This product contains no hazardous ingredients ( Blend of non-ionic surfactants, Corrosion Inhibitors, Organic solvents and demineralised water.)
| Skin contact | Irritant |
| Eye contact | Irritant |
| Ingestion |
Not toxic by ingestion, may cause mild lung or throat irritation at high concentrations, prolonged or repeated contact may cause drying of skin |
|
INHALATION |
If irritation occurs, remove person to fresh air |
|
EYE CONTACT |
Immediately flush eye with clean water for at least 15 minutes, get medical attention |
|
SKIN CONTACT |
Remove contaminated clothing and shoes, flush area with copious amounts of clean water and soap, seek |
|
INHALATION |
If irritation occurs, remove person to fresh air |
|
INGESTION |
Do NOT induce vomiting, do not give anything by mouth to an unconscious person, seek medical attention immediately |
|
FLASH POINT |
>100°C / 212 °F (PMCC) |
|
CONDITIONS OF FLAMMABILITY |
Non-flammable, water based |
|
EXTINCTION MEDIA |
Use dry chemical, CO2, alcohol-proof foam, sand or fine water spray |
|
FIRE AND EXPLOSION HAZARD |
Oxides of nitrogen, carbon monoxide, carbon dioxide. Fumes are acrid and irritating |
|
METHODS FOR CLEANING UP SMALL SPILLS |
Absorb with sand or vermiculite, sweep up and place in container for later disposal. |
|
METHODS FOR CLEANING UP LARGE SPILLS |
Dike for later salvage or disposal. In water, divert flow to prevent spread of product, remove for disposal |
|
ENVIRONMENTAL PRECAUTIONS |
Do not allow product or run off to enter any sewer or other water source. |
|
HANDLING |
Use in well ventilated area, wear recommended personal protective equipment and wash after handling |
|
STORAGE |
Store in dry, cool well ventilated area out of direct sunlight and away from ignition sources. The product has a shelf life of 5 years. |
|
ENGINEERING MEASURES |
Use mechanical ventilation if used in a confined area or at elevated temperatures |
|
EYES PROTECTION |
Goggles should be worn |
|
HAND PROTECTION |
Impermeable gloves such as butyl rubber, wash after handling |
|
SKIN PROTECTION |
Long sleeves and long pants to prevent skin contact and closed toe footwear to prevent skin contact |
|
PHYSICAL STATE |
Liquid |
|
APPEARANCE |
Clear, pale straw color |
|
ODOR |
Mild, pleasant |
|
SPECIFIC GRAVITY |
1.01 |
|
DENSITY |
8.35 lbs/gal |
|
PH |
7.2-7.5 |
|
FREEZING POINT |
0 °C / 32 °F |
|
BOILING POINT |
≥100ºC / 212 °F |
|
STABILITY |
Product is stable under normal temperature and pressure |
|
MATERIALS TO AVOID |
Product is incompatible with strong oxidizing or reducing agents |
| Skin contact | irritant |
| Eye contact | irritant |
| ingestion |
Not toxic by ingestion, may cause mild lung or throat irritation at high concentrations, prolonged or repeated contact may cause drying of skin |
|
INHALATION |
If irritation occurs, remove person to fresh air |
WATER HAZARD CLASS:- slightly hazardous for water when discharged in large volumes
DISPOSAL :- Dispose of by methods in compliance with local, state and federal regulations.
MOBILITY :- May penetrate the soil as it is biodegradable.
SEWAGE TREATMENT PLANTS :- Not toxic to sewage organisms at concentrations expected to be found in sewage treatment
plants .
Transport over land ADR/RID : Not classified as hazardous for transport.
A non-hazardous organic surfactant based product.
N/A
The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.