RXSOL -16-1007-025 is a specially product formulated by strong emulsifying agents, surfactants and powerful solvents to treat metal and ceramic oil filters, which suffer from oil depositions, carbonized oil accumulation and sludge. Heavy duty liquid , which is Extremely and effectively removes tenacious carbon deposits, burnt grease, Oily residues and lacquers , from fuel oil and lube oil purifiers, filters, separators. Very usefull to clean fuels recipitation of paraffin and asphalt or with lubricating oils mixing of different types of oil can form solid encrustations on the mesh. It is heavy duty emulsifying liquid , which is Extremely and effectively removes tenacious carbon deposits, burnt grease, Oily residues and lacquers , from fuel oil and lube oil purifiers, filters, separators. Effective cleaning of fine meshes is achieved by soaking in RXSOL-16-1074-025 followed by blasting with compressed air using a cleaning gun.
The Rxsol -16-1007-025 to be used depends on two factors: the volumetric capacity of the filter to be cleaned and the degree of deposition/contamination in the filter. In the first case, the dosage must equal the filter capacity. In the second case, the dosage must be corresponding to the desired degree of cleaning.
Application and use :
The RXSOL -16-1007-025 to be used depends on two factors: the volumetric capacity of the filter to be cleaned and the degree of deposition/contamination in the filter. In the first case, the dosage must equal the filter capacity. In the second case, the dosage must be corresponding to the desired degree of cleaning.
RXSOL -16-1007-025 use by the circulation or immersion method. If using the circulation method, determine the filter capacity and circulate at a constant rate for 6–20 hours. If using the immersion method, let the filter soak in enough quantity of Rxsol -16-1007-025, analogous to the degree of contamination, for a time of 6–20 hours. The Temperature of Cleaning solution should not be allowed to exceed 60 °C.
Cleaning process and requirement of time depends on the type of the contamination. With fuels recipitation of paraffin and asphalt or with lubricating oils mixing of different types of oil can form solid encrustations on the mesh.
RXSOL -16-1007-025 can be undercooled or overheated during storage but remains fully usable when returned to normal temperature.
MESH CONTAMINATED WITH HEAVY OIL:
Elements contaminated with heavy oil must be soaked in a standard commercial aromatic solvent. After soaking the elements are cleaned by high pressure Cleaning Device using RXSOL-16-1095-025 solution.
May be used directly or diluted in the ratio of 1 part concentrate to 5 parts water, ( or 1 . Ratio of any solvent like diesel ).Rxsol -16-1007-025 use by the circulation or immersion method. If using the circulation method, determine the filter capacity and circulate at a constant rate for 6–20 hours. If using the immersion method, let the filter soak in enough quantity of Rxsol -16-1007-025, analogous to the degree of contamination, for a time of 6–20 hours. The Temperature of Cleaning solution should not be allowed to exceed 60 °C.
PHYSICAL PROPERTIES
Rxsol -16-1007-025 is a concentrated hydrocaron based liquid mixture, non–corrosive with strong emulsifying agents and surfactants.
Appearance / Color : Clear, colorless liquid
Specific gravity : 0.85 gr/cm3 at 15°C
Flash Point : > 70°C
Odor : Aromatic Solvent
Feature and Benifit
• Non–corrosive and safe to use in all types andkinds of filters.
• Preserves, protects and maintains the operational capabilities of the filter by thorough and complete cleaning.
• Provides quick and efficient action.
• Its pure, high quality components readily remove oil and grease deposits, even when dry.
• Can be combined with a specific range of products.
• Safe to use on all metals and their alloys as well as those with inorganic clay finishes.
• Attacks and dissolves water/oil emulsions and concentrations.
• Cost effective, easy to apply and use.
INSTRUCTIONS FOR USE:
Use of RXSOL-16-1095-025 is not restricted to a particular method of cleaning. Depending on the operating conditions, RXSOL-16-1095-025 can be used in a dip bath, in a spraying plant, in steam jetting or in manual application using a cloth, brush or sponge. It can be used warm or cold. RXSOL-16-1095-025 is miscible with water - even seawater.
Concentration for mesh cleaning: 1 : 2,5
Temperature: up to a maximum of 60 °C
The concentration depends on the type and thickness of the adhesive substance to be removed. When used in concentration below 1 : 30 rinsing is usually not required. No visible film remains on the surface
NOTE ::: Drained the automatic filter by automatic back-flushing (i.e. all filter chambers).
1 Then soak the filter element assembly, with the openings of the candle elements facing down in a suitable tank filled with RXSOL-16-1095-025 solvent.
2 The soaking time is completely depends on cleaning method :
a)In cold RXSOL-16-1095-025 cleaner the maximum soaking time is 24 hours.
b)In hot solution the maximum soaking time is 12 hours.
3. After soaking remove the whole filter element assembly from the tank and for dry to keep all parts on place it on a suitable perforated sheet metal.
4. Then you may blow compressed air through the candles from the inside to the outside.
5. After this procedure the complete filter element assembly should be immersed in fresh cleaner, with the candle element opening down-wards, and rinsed through with an up and down motion.
6 Allow the filter element assembly to drain again and dry it by blowing compressed air through it again from the inside to the outside. The manual cleaning procedure described here has produced adequate results (ca. 60 % clean) in similar applications.
Note : CLEANING of filter can be enhance with high pressure machine.
RXSOL-16-1095-025 is a fluid cleaning and degreasing agent with a wide range of application. It can be used for practically all cleaning and degreasing purposes.
RXSOL-16-1095-025 cleans rapidly, thoroughly and extremely economically.
Use of RXSOL-16-1095-025 renders safety precautions superfluous.
RXSOL-16-1095-025 has these outstanding characteristics without exhibiting the
isadvantages of solvent cleaners.
RXSOL-16-1095-025 is non-flammable and free from caustic
This product is biologically degradable
RXSOL-16-1095-025 can be undercooled or overheated during storage but remains fully usable when returned to normal temperature.
Future and Benifit
• Non–corrosive and safe to use in all types andkinds of filters.
• Preserves, protects and maintains the operational capabilities of the filter by thorough and complete cleaning.
• Provides quick and efficient action.
• Its pure, high quality components readily remove oil and grease deposits, even when dry.
• Can be combined with a specific range of products.
• Safe to use on all metals and their alloys as well as those with inorganic clay finishes.
• Attacks and dissolves water/oil emulsions and concentrations.
• Cost effective, easy to apply and use.
Effectively removes tenacious carbon deposits, burnt grease, Oily residues and lacquers , from fuel oil and lube oil purifiers, filters, separators
| Product Name | RXSOL-16-1074-025 |
| Product Type | Filter Cleaner |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 / 27611360 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |
Chemical Nature:
| Ingredients | CAS Number | Proportion | Classification |
| Medium Aliphatic Solvent Naphtha | 64742-88-7 | 5-20% | Xn: R65 |
| Solvent Naphtha Light Aromatic | 64742-95-6 | 70-90% |
Xn, N: R65 |
| Fatty Alcohol 5 moles Ethoxylate | Polymer Exemption | 1-10% | Xi: R41 |
Colorless liquid, with characteristic odour (petroleum like). Flammable. Harmful: may cause lung damage if swallowed. Repeated exposure may cause skin dryness or cracking. Vapours may cause drowsiness and dizziness. Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
| INHALATION | Remove immediately the affected person to fresh air. If breathing has stopped, administer artificial respiration. Contact physician or emergency medical facility immediately. |
|
SKIN |
Promptly flush the contaminated skin with soap and water. If this chemical penetrates the clothing promptly remove the clothing and wash. |
|
EYES |
Immediately wash the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately. Contact lenses should not be worn when working with this chemical. |
| INGESTION | Contact a physician or emergency medical facility immediately. Never give anything to an unconscious person. |
| EXTINGUISH MEDIA | Use foam, water spray of fog. Dry chemical powder, carbon dioxide, sand or earth may be used for small fires only. |
| FIRE FIGHTING PROCEDURES | Fire fighters should wear self contained breathing apparatus and full protective clothing. Keep unnecessary people away, isolate hazard area and deny entry. Dike area to prevent run off and contamination of water sources. Persons who have been exposed to contaminated smoke should be immediately examine by a physician and checked for symptoms of poisoning. |
|
HAZARDOUS COMBUSTION PRODUCTS |
Possible formation of toxic Carbon Monoxide when combustion takes place in lack of oxygen. |
| PERSONAL PRECAUTIONS | Avoid contact with skin and eyes. Do not breathe vapor. Extinguish naked flames. Remove ignition sources. No smoking. Avoid sparks. Evacuate the area of all non-essential personnel. Take precautionary measures against static discharge. |
| ENVIRONMENTAL PRECAUTIONS | Prevent contamination of soil and water. Prevent from spreading or entering into drains, ditches or rivers by using sand or other appropriate barriers. |
|
METHODS FOR CLEANING UP |
Absorb liquid with sand, earth or spill control material. Shovel up and place in a labeled, sealable container for subsequent safe disposal. Put leaking containers in a labeled drum. Scrum contaminated surfaces with detergent solution. |
| OTHER INFORMATION | Risk of explosion. Inform the emergency services if liquid enters surface water drains. Vapors may form an explosive mixture with air. |
| HANDLING | Avoid prolonged or repeated contact with skin. Do not breathe vapor, spray mists. Extinguish any naked flames. Remove ignition sources. Avoid sparks. Do not smoke. Take precautionary measures against static discharges. Earth all equipment do not empty into drains. |
|
STORAGE |
Keep container tightly closed and in a well ventilated place. Keep away from direct sunlight and other sources of ignition. Do not smoke in storage areas. |
EXPOSURE LIMITS
Solvent Naphtha (petroleum), Light Aromatic
As the product contains the following substances it is recommended the following exposure standards
| Material | Source | Type | ppm | mg/m3 |
Notation |
| Stoddard Solvent | EU HSPA |
TWA (8 h) |
100ppm |
||
| 1,2,4 – Trimethyl benzene |
ACGIH |
TWA | 25 ppm |
Medium Aliphatic Solvent Naphtha (petroleum)
| Material | Source | Type | ppm | mg/m3 | Notation |
| Aromatic solvents 160 – 185 | EU HSPA | TWA (8 h) | 100 mg/m3 |
Fatty Alcohol 5 moles Ethoxylate
OSHA: N/R
ACGIH: N/R
PERSONAL PROTECTION
| Eye and face protection: | Wear safety glasses. Contact lenses should not be worn. Chemical goggles and face shield should be worn where splashing is a possibility. |
| Skin protection: | Wear solvent resistant gloves such as Viton, polyvinyl alcohol or equivalent and solvent resistant boots, safety shower and eyewash station should be available. |
| Respiratory protection: |
Wear self a self contained breathing apparatus or air line respirator, with full face piece is required for vapour concentrations and for spills. |
| Appearance: | Liquid |
| Color: | Colorless |
| Odor: | Characteristic aromatic solvent odor |
| Initial Boiling Point: | >1450C |
| Final Boiling Point: | 1800C |
| Flash Point: | 460 C |
| Autoignition Temperature: | >450oC |
| Lower Explosion Limit (vol %): | >0.6 % (v/v) |
| Upper Explosion Limit (vol %): | 60 % (v/v) |
| Vapour Pressure: | 0.2-0.6 kPa at 20oC |
| Relative vapor density (air=1): | Not available |
| Density (gr/ml): | 0.85 at 15oC |
| Bulk Density (kg/m3): | Not available |
| Viscosity: | Not available |
| STABILITY | Stable under normal use conditions. |
| CONDITIONS TO BE AVOIDED | Avoid contact with open flame, sparks and heating. |
| MATERIALS TO BE AVOIDED | Keep it away far from strong oxidant materials. |
| HAZARDOUS DECOMPOSITION PRODUCTS | Possible the formation of toxic Carbon monoxide when no proper combustion takes place. |
TOXICOLOGICAL DATA
EXPOSURE LIMITS
Solvent