| Porduct Name | EUROFLOC EMULSION A |
| Part Number | RXSOL-40-4195-220 |
Company Details:....
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA
| Phone | +91 22 20871200 - 1400 |
| Fax | +91 22 27612100 :::AOH :0091 9821214367 |
| mail@rxmarine.com | |
| Website | www.rxmraine.com |
Mixtures
Contains:
| Identification | x = Conc. % | Classification 1272/2008 (CLP) |
| Hydrocarbons, C12-C15, nalkanes, isoalkanes 2% aromatics | ||
| CAS - | 30 ≤ x 40 | Asp. Tox. 1 H304, EUH066 |
| EC 920-107-4 | 001097 | |
| INDEX - | ||
| Reg. no. 01-2119453414-43-XXXX | ||
| Isotridecanol, ethoxylated | ||
| CAS 9043-30-5 | 3 ≤ x 4 | Acute Tox. 4 H302, Eye Dam. 1 H318 |
| EC 500-027-2 | ||
| INDEX - |
The full wording of hazard (H) phrases is given in section 16 of the sheet.
| Classification of the substance or mixture |
The product is not classified as hazardous pursuant to the provisions set forth in EC Regulation 1272/2008 (CLP).
However, since the product contains hazardous substances in concentrations such as to be declared in section no. 3, it requires a safety data sheet with
appropriate information, compliant to (EU) Regulation 2015/830.
Hazard classification and indication:
|
|
Label elements
Hazard pictograms: - Signal words: - |
Hazard labelling pursuant to EC Regulation 1272/2008 (CLP) and subsequent amendments and supplements
|
|
Hazard statements: EUH066 EUH210 |
Repeated exposure may cause skin dryness or cracking. Safety data sheet available on request. |
| Precautionary statements: | |
| Other hazards | On the basis of available data, the product does not contain any PBT or vPvB in percentage greater than 0,1%. |
| Description of first aid measures | No episodes of damage to personnel assigned to the use of the product are known. In case of necessity, the following general measures are adopted: INHALATION: Bring the subject into the open air. If breathing stops, apply artificial respiration. Consult a doctor immediately. INGESTION: Immediately rinse the mouth with plenty of water. Induce vomiting only as directed by your doctor. Do not give anything by mouth if the subject is unconscious. EYES and SKIN: Wash with plenty of water and soap. In case of persistent irritation, consult a doctor. |
| Most important symptoms and effects, both acute and delayed | No episodes of damage to health attributable to the product are known. |
| Indication of any immediate medical attention and special treatment needed | Information not available |
| Extinguishing media |
SUITABLE EXTINGUISHING EQUIPMENT
The extinguishing equipment should be of the conventional kind: carbon dioxide, foam, powder and water spray.
UNSUITABLE EXTINGUISHING EQUIPMENT
None in particular.
|
| Special hazards arising from the substance or mixture |
HAZARDS CAUSED BY EXPOSURE IN THE EVENT OF FIRE
Do not breathe combustion products.
Do not breathe combustion products.HAZARDS CAUSED BY EXPOSURE IN THE EVENT OF FIRE
Do not breathe combustion products.
|
| Advice for firefighters |
Highly flammable liquid and vapor. Runoff to sewer may create fire or explosion hazard.
In a fire or if heated, a pressure increase will occur and the container may burst, with the
risk of a subsequent explosion. The vapor/gas is heavier than air and will spread along
the ground. Vapors may accumulate in low or confined areas or travel a considerable
distance to a source of ignition and flash back.
Highly flammable liquid and vapor. Runoff to sewer may create fire or explosion hazard.
In a fire or if heated, a pressure increase will occur and the container may burst, with the
risk of a subsequent explosion. The vapor/gas is heavier than air and will spread along
the ground. Vapors may accumulate in low or confined areas or travel a considerable
distance to a source of ignition and flash back.
Highly flammable liquid and vapor. Runoff to sewer may create fire or explosion hazard.
In a fire or if heated, a pressure increase will occur and the container may burst, with the
risk of a subsequent explosion. The vapor/gas is heavier than air and will spread along
the ground. Vapors may accumulate in low or confined areas or travel a considerable
distance to a source of ignition and flash back.
GENERAL INFORMATION
Use jets of water to cool the containers to prevent product decomposition and the development of substances potentially hazardous for health. Always
wear full fire prevention gear. Collect extinguishing water to prevent it from draining into the sewer system. Dispose of contaminated water used for
extinction and the remains of the fire according to applicable regulations.
SPECIAL PROTECTIVE EQUIPMENT FOR FIRE-FIGHTERS
Normal fire fighting clothing i.e. fire kit (BS EN 469), gloves (BS EN 659) and boots (HO specification A29 and A30) in combination with self-contained
open circuit positive pressure compressed air breathing apparatus (BS EN 137)
|
| Personal precautions, protective equipment and emergency procedures |
Block the leakage if there is no hazard.
Wear suitable protective equipment (including personal protective equipment referred to under Section 8 of the safety data sheet) to prevent any
contamination of skin, eyes and personal clothing. These indications apply for both processing staff and those involved in emergency procedures.
|
| Environmental precautions | The product must not penetrate into the sewer system or come into contact with surface water or ground water.. |
| Methods and material for containment and cleaning up | Collect the leaked product into a suitable container. Evaluate the compatibility of the container to be used, by checking section 10. Absorb the remainder with inert absorbent material. Make sure the leakage site is well aired. Contaminated material should be disposed of in compliance with the provisions set forth in point 13. |
| Reference to other sections | Any information on personal protection and disposal is given in sections 8 and 13. |
| Precautions for safe handling | Before handling the product, consult all the other sections of this material safety data sheet. Avoid leakage of the product into the environment. Do not eat, drink or smoke during use. Remove any contaminated clothes and personal protective equipment before entering places in which people eat. |
| Conditions for safe storage, including any incompatibilities | Store only in the original container. Store the containers sealed, in a well ventilated place, away from direct sunlight. Keep containers away from any incompatible materials, see section 10 for details. |
| Specific end use(s) | Information not available |
| Control parameters | Information not available |
Exposure controls
Individual protection measures:
| Hand protection | Wear chemical-resistant Nitrile or PVC gloves (EN 374). |
| Eye protection | Wear work glasses with lateral protection (standard EN 166). |
| Skin protection | Wear suitable protective clothing according to EN 344, 465-466-467 |
| Respiratory protection |
Not normally required, but wear approved respirator when airborne exposure is likely.
Environmental exposure controls: Use according to good working practices and avoid dispersing the mixture in the environment.
|
ENVIRONMENTAL EXPOSURE CONTROLS
The emissions generated by manufacturing processes, including those generated by ventilation equipment, should be checked to ensure compliance with environmental standards.
| Appearance | viscous liquid |
| Colour | white |
| Odour | lighty |
| Odor Threshold | Not available. |
| pH | 5,5-8,5. |
| Melting point / freezing point | Not available |
| Initial boiling point | > 100 °C |
| Boiling range | Not available |
| Flash point | > 60 °C |
| Evaporation rate | Not available. |
| Flammability of solids and gases |
Not available
materials.Extremely flammable in the presence of the following materials or conditions: oxidizing
materials.
|
| Lower inflammability limit |
Not available |
| Upper inflammability limit | Not available |
| Lower explosive limit | Not available |
| Upper explosive limit | Not available |
| Vapour pressure | 2,3 kPa |
| Vapour density | Not available |
| Relative density | 1-1,2 |
| Solubility | Not available |
| Partition coefficient: n-octanol/water | Not available |
| Auto-ignition temperature | Not available |
| Decomposition temperature | Not available |
| Viscosity | >20,5 mm2/sec (40°C) |
| Explosive properties | Not available. |
| Oxidising properties | Not available |
Other information
| Total solids (250°C / 482°F) | 3,00 % |
| VOC (Directive 2010/75/EC) | 0 |
| VOC (volatile carbon) | 0 |
| Water solubility | complete |
| Reactivity | There are no particular risks of reaction with other substances in normal conditions of use. |
| Chemical stability | The product is stable in normal conditions of use and storage. |
| Possibility of hazardous reactions | No hazardous reactions are foreseeable in normal conditions of use and storage |
| Conditions to avoid |
None in particular. However the usual precautions used for chemical products should be respected.
Hydrocarbons, C12-C15, n-alkanes, isoalkanes 2% aromatics
Avoid exposure to: naked flames,high temperatures. |
| Incompatible materials |
Hydrocarbons, C12-C15, n-alkanes, isoalkanes 2% aromatics
Avoid contact with: strong oxidising agents.
|
| Hazardous decomposition products | Information not available |
In the absence of experimental data for the product itself, health hazards are evaluated according to the properties of the substances it contains, using the criteria specified in the applicable regulation for classification. It is therefore necessary to take into account the concentration of the individual hazardous substances indicated in section 3, to evaluate the toxicological effects of exposure to the product.
Information on toxicological effects
| Metabolism, toxicokinetics, mechanism of action and other information | Information not available |
| Information on likely routes of exposure | Information not available |
| Delayed and immediate effects as well as chronic effects from short and long-term exposure | Information not available |
| Interactive effects | Information not available |
| ACUTE TOXICITY |
LC50 (Inhalation) of the mixture:
Not classified (no significant component)
LD50 (Oral) of the mixture:
>2000 mg/kg
LD50 (Dermal) of the mixture:
Not classified (no significant component)
Hydrocarbons, C12-C15, n-alkanes, isoalkanes 2% aromatics
LD50 (Oral) > 15000 mg/kg rat (equivalent or similar to OECD Guideline 401, GLP)
LC50 (Inhalation) > 4,951 mg/l/4h RAT (equivalent or similar to OECD Guideline 403)
Isotridecanol, ethoxylated
LD50 (Oral) > 1900 mg/kg
|
| SKIN CORROSION / IRRITATION | Repeated exposure may cause skin dryness or cracking |
| SERIOUS EYE DAMAGE / IRRITATION | Does not meet the classification criteria for this hazard class |
| RESPIRATORY OR SKIN SENSITISATION | Does not meet the classification criteria for this hazard class |
| GERM CELL MUTAGENICITY | Does not meet the classification criteria for this hazard class |
| CARCINOGENICITY | Does not meet the classification criteria for this hazard class |
| REPRODUCTIVE TOXICITY | Does not meet the classification criteria for this hazard class |
| STOT - SINGLE EXPOSURE | Does not meet the classification criteria for this hazard class |
| STOT - REPEATED EXPOSURE | Does not meet the classification criteria for this hazard class |
| ASPIRATION HAZARD | Does not meet the classification criteria for this hazard class Viscosity: >20,5 mm2/sec (40°C) |
| Toxicity |
Isotridecanol, ethoxylated
EC50 - for Crustacea > 1 mg/l/48h daphnia magna
|
| Persistence and degradability | Information not available |
| Bioaccumulative potential | Information not available |
| Mobility in soil | Information not available |
| Results of PBT and vPvB assessment | On the basis of available data, the product does not contain any PBT or vPvB in percentage greater than 0,1%. |
| Other adverse effects | Information not available |
Waste treatment methods
| UN number | Not applicable |
| UN proper shipping name | Not applicable |
| Transport hazard class(es) | Not applicable |
| Packaging group | Not applicable |
| Environmental hazards | Not applicable |
| Special precautions for user | Not applicable |
| Transport in bulk according to Annex II of Marpol and the IBC Code | Information not relevant |
Safety, health and environmental regulations/legislation specific for the substance or mixture
Seveso Category - Directive 2012/18/EC: None
| Restrictions relating to the product or contained substances pursuant to Annex XVII to EC Regulation 1907/2006 | None |
| Substances in Candidate List (Art. 59 REACH) | On the basis of available data, the product does not contain any SVHC in percentage greater than 0,1%. |
| Substances subject to authorisationNone | None |
| Substances subject to exportation reporting pursuant to (EC) Reg. 649/2012 | None |
| Substances subject to the Rotterdam Convention | None |
| Substances subject to the Stockholm Convention | None |
| Healthcare controls | Information not available |
Chemical safety assessment
A chemical safety assessment has not been performed for the preparation/for the substances indicated in section 3.
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |