Heavy DUTY and fast effective Descaler for any type of metal (except for soft metal like aluminium and zinc). This scales remover for sewage pipe lines and evac systems . It contains special inhibitors to make its after on most metals, concrete and plastic surfaces. Drain Blaster cuts down the need to plumb or rod, or excavate when the build-ups occur.
OTHER NAME : BLOCKED PIPE CLEANER, PIPE-CLEAN, DRAIN PIPE CLEANER
Other Details:
- The cleaning and maintenance of pipes of washbasin and sinks is a strenuous and difficult task, but Drainup Drain Cleaner makes your work easy.
- It effectively cleans blockage of the pipes of washbasins and sinks.
- Frequently chopped food particles gets jammed and clogged in the entrance of the pipes and produces wreckage that effects the regular flow of water resulting in foul smell, but drainup drain cleaner removes the blockage very easily without costing much of your time.
- Drainup Drain Cleaner is your instant solution to remove oil and dirt materials from drainpipes.
- One time use pack.
- 3 action instant drain clean.
Application:
- Remove excess water from blocked kitchen sink, wash basin or tub.
- Pour the content into the blocked sink.
- Add a cup of water and leave for approximately 30min.
- Flush well with water.
- Repeat application for stubborn blocks.
Features:
- Clears clogged drains
- Melts grease and hair
- Keeps drain germs free
| Product Name | RXSOL-16-1057-005 |
| Product Type | Drain Pipe sewer Cleaner |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Kolkata, Chennai, Vizag, Fujairah, Muscat
| Phone | +91 22 65113333 / 5555 / 9999 / 27611360 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |
|
Chemical Name |
CAS Number |
SARA-III LIST |
OSHA PEL |
ACGIH |
Carcinogen |
| ACID Derivative | Proprietory Blend | Yes | 1mg/M3 | 1mg/M3 | d |
| Corroision Inhibitor Blend | Proprietory Blend | ||||
| Cationic Emulsifier Propritory | Proprietory Blend | ||||
|
Appearance |
Colorless, clear to cloudy liquid |
|
Odour |
no odor to mild acrid odor. |
|
Contact with eyes |
Corrosive. |
|
Contact with skin |
Corrosive. |
|
Inhalation |
May cause respiratory irritation. Liquid is corrosive. |
|
Ingestion |
Corrosive. |
|
Eye Contact: |
Flush with water for 15 minutes. Seek medical attention. |
|
Skin Contact: |
Flush wi th water for 15 minutes . Seek medi cal at tent ion. |
|
Ingestion |
DO NOT INDUCE VOMI T ING. Drink large volumes of water. Get immediate medical attention. |
|
Inhalation |
Remove victim to fresh air. Get medical attention. |
- FLASH POINT AND METHOD USED:-None
- EXTINGUISHER MEDIA:-CO2 or dry chemical . Use water fog to knock down vapors.
- SPECIAL FIRE FIGHTING PROCEDURE S : Use NIOSH / MSHA approved positive pressure self-contained breathing apparatus when any material is
involved in a fire. DO NOT allow water to enter containers. Violent reaction results.
|
Respiratory Protection ( specify type) : |
Not needed in normal use and handling of product. |
|
Protective Gloves : |
Rubber |
|
Eye Protection: |
Chemical goggles and faceshield |
|
Other Protective Clothing & Equipment : |
Coveral ls, rubber apron and boots. Eyewash stat ion and safety shower . |
|
Hygienic WorkPractices : |
Avoid contact with liquid & breathing of mists or vapors. Upon contact with eyes or skin, wash off with water immediately. |
|
Ventilation Requirements : |
Normal room ventilation is usually adequate. As required to keep air concentration below PEL |
|
Steps To Be Taken If Material Is Spilled Or Released: |
Dike spill & soak up with inert absorbent. Shovel or sweep & place in properly labeled approved DOT container & seal for disposal in authorized legal manner. Neutralize area with soda ash & dispose of material properly. |
| Waste Disposal Methods: | Dispose of material according to local, state or federal regulations. |
|
Storage |
Store in original shipping containers. Keep closed when not in use. Follow label directions when using. Shelf life one year. |
| Other Precautios & / or Special Hazar s : | KEEP OUT OF REACH OF CHILDREN |
|
FLASH POINT AND
METHOD USED |
None |
|
EXTINGUISHER MEDIA: |
CO2 or dry chemical . Use water fog to knock down vapors. |
|
SPCIAL FIRE FIGHTING PROCEDURES : |
Use NIOSH / MSHA approved positive pressure self-contained breathing apparatus when any material is involved in a fire. DO NOT allow water to enter containers. Violent reaction |
|
Appearance: |
Colorless, clear to cloudy liquid |
|
Odor |
no odor to mild acrid odor. |
|
Boiling Point: |
338ºC |
|
Vapor Pressure: |
N/A |
| Vapor Density (Air = 1): | 3.38 Ev |
|
Solubility in Water: |
Complete |
|
Specific Gravity (H2O=1): |
1.835 |
|
Evaporation Rate |
N/A |
| Water Reactive: |
Violently |
- Incompatibility (Mat. to avoid)(Mat. to avoid):Solvents,oxidizers,reducing agents,combustible materials,organic materials, alkalis,powdered
metals,amines,carbides,fulminates chlorates,nitrates,picrates.
- Conditions to Avoid: Heating. Water on sulfuric acid will cause splattering, fuming and evolution of heat
|
Toxicological information |
No experimental data available. |
|
Inhalation |
May cause respiratory irritation. Liquid is corrosive. |
|
Contact with skin |
Corrosive. |
|
Contact with eyes |
Corrosive. |
|
CHRONIC EFFECTS: |
Dermat i t is or secondary ef fects of burns, chronic over -exposure may cause tooth erosion, chronic cough. |
|
Ingestion |
Corrosive. |
| Medical Conditions General ly Ag gravated by Exposure | N/A |
| Toxicity | LC50 (Crustaceans): 40.4 mg/l/48h WGK: 1. |
| Persistence and degradability |
Not applicable. |
| Bioaccumulative potential | The product has no potential for bioaccumulation. |
| Mobility in soil | No information available. |
| Results of PBT and vPvB assessment |
Not classified as PBT or vPvB. |
| Other adverse effects |
No information available. |
Contaminated adsorbent must be removed in sealed, plastic lined drums and disposed. Or can be diluted with plenty of water before disposal.
| Transport hazard class(es) | 8 |
| Packing Group | III |
| Environmental hazards | Not classified as a Marine Pollutant. |
| Special precautions for user | Corrosive. |
Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code
R35- Causes severe burns. S26- In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S37/39- Wear suitable gloves and eye/face protection. S45- In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
HMIS :
Health Hazard: 3
Fire Hazard: 0
Reactivity: 2
Personal Protection: j
Protective Equipment:
Gloves. Synthetic apron. Vapor and dust respirator. Be sure to use an approved/certified respirator or equivalent. Wear appropriate respirator when ventilation is inadequate. Splash goggles.
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall Rx Marine International be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.