Degreaser Aqueous pH Conc. B F E Conc

Multipurpose concentrate cleaner and can be diluted as per requirement...
Category

Aqueous pH Degreaser Conc.  BFE Conc   is a multipurpose concentrate cleaner and can be diluted as per requirement . Its unique concentrated formulation & superior performance in hot or cold water makes it very popular to remove Remove difficult or hard deposits from all kinds of surface.

RXSOL-10-1741-025 Concentrated degreaser for the elimination of mineral and hydrocarbon oil and grease from all surfaces. Suitable for manual and automatic scrubber applications, both highand low-pressure.
 

Application

Shop Floors:

This multi-purpose cleaner and degreaser contains a high quality butyl combined with special detergents and builders for superior performance in hot or cold water. Aqueous pH Degreaser Conc.  B F E Conc  contains a special rinse additive and special anti-depositing agents to clean and rinse without leaving a residue. When using Aqueous pH Degreaser Conc.  B F E Conc  dilute in warm or hot water for best performance. Spray brush or mop on, and allow the cleaner to penetrate and loosen deposits, then flush away with a clean water rinse.Aqueous pH Degreaser Conc.  B F E Conc may be diluted from 1 part Aqueous pH Degreaser Conc.  B F E Conc  to 200 parts water. For greasy shop floors dilute 1 part to 5 parts water. If using a floor machine -Aqueous pH Degreaser Conc.  B F E Conc  may be diluted 1 part to 25 parts water. Remove difficult or hard deposits by allowing the Aqueous pH Degreaser Conc.  B F E Conc  solution to saturate for approximately five minutes, rub gently with stiff brush and rinse.

Equipment :

For degreasing equipment and greasy parts dilute Aqueous pH Degreaser Conc.  B F E Conc 1 part to 15 parts water.  Spray on surface and let product work for 5 to 8 minutes then rinse with high pressure wash or steam cleaner. Aqueous pH Degreaser Conc.  B F E Conc also works well in a hot soak tank. This product is an amazing cleaner / degreaser.

When using Aqueous pH Degreaser Conc.  B F E Conc. use though a proportioning device if possible. This will make the product go farther because it will always be used properly.  Try this product! It is a labor saver and cost cutter, and people are amazed at the cleaning properties of Aqueous pH Degreaser Conc.  B F E Conc.

Use a solution of DEGREASER HEAVY DUTY in kerosene or other suitable petroleum solvent for a light cleaning operation, or use neat for heavily soiled parts. Soak items to be cleaned for at least 20 minutes and then rinse off with hot water.

Dose

For Daily and conventional uses it can be diluted  0.5 to 2%  while for Occasional use dilute from 2 to 5%

 

Dilution Rates:

Degreasing action          :-  Make dilution 500 ml to 1 Ltr      with     4 to 5 Ltr WATER  ( This can be used as HEAVY DUTY DEGRESER )

Rigwash                        :-  Make dilution 500 ml to 1 Ltr   with         8 to 10 Ltr WATER ( This can be used as HEAVY DUTY RIG WASH  )
                                          And for General Purpose Rigwash dilution can be done up to 20 Ltrs

Dispersant                    :-  Make dilution 500 ml to 1 Ltr       with      20-25 Ltr WATER ( This can be used as Oil spill Dispesant )

Cutting Oil                    :-  Make dilution 500 ml to 1 Ltr     with   70 to100 Ltr WATER ( This can be used as Cuttings Wash Fluid  )

Garment / Laundry wash:-  Make dilution 500 ml to 1 Ltr  with 200 to 250 Ltr WATER ( This can be used as Laundry Wash  ) 
 

Soaking and impregnation of the surfaces with the solution at the dosage recommended below with mechanical cleaning action (automatic scrubber – low- and high-pressure systems) Can also be applied in automatic scrubber washing in direct passage - the equipment for the machine will have to be selected according to the type of floor (discs or brushes)

Technical specifications
Product Propertes
Appearance / odour .............................. Clear yellowish liquid / Mild Perfumed
Chemical Nature .................................... Mixture of Cationic Anionic
pH .........................................................  On 2% Dilution 7.8 to 8.5
Boiling point ........................................... >NA
Ignition temp .......................................... >NA
SOLUBILITY .......................................... Emulsifiable with water / soluble in most solvents
Note

Can be diluted with fresh / Sea water

Handling: For the complete recommendations relating to the product handling and elimination precautions, please consult the corresponding Safety Data Sheet. For use by trained professional staff only.
  • Storage: Keep the product in its original closed. 
  • packaging. Do not expose the product to extreme cold.
Remarks / Precaution

Concentrate Industrial Cleaner cum degreaser. is most popular in Navy, Railaways and heavy industries to clean heavy deposited grease mud and carbon.

Packing sizes
5, 10, 20, 25, 50, 210 Ltr export quality standard. Concentrate Industrial Cleaner cum degreaser.
MSDS

Product Name RXSOL-10-1741
Product Type Aqueous pH Degreaser Conc.  B F E Conc

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

STOCK available at Mumbai, Kandla, Chennai, Kolkata, Visakhapatnam, Fujairah

Phone +91 22 27815541 / 42
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email mail@rxmarine.com

Name EC No. CAS-No. Content Classification (67/548)
Chemical characterization : VERY POWERFULL Bio Degradable CLEANER MIXTURE
Description:
Mixture contains: Carrier liquid of  PETRA   ( 20 to 30% )  Along with 2-BUTOXYETHANOL 203-905-0 111-76-2 10-30% Xn;R20/21/22 Xi;R36/38, Linear - Alkyl  delivative  Emulsifiable  products  ,Emulsifying  agents ETHANEDIOL 203-473-3 107-21-1 10-30% Xn;R22 as surfactants, FattyAcid & alcohal derivative ( biodegradable substance 85 to90%) and Ethoxylate FATTY ALCOHOL SURFACTANT Proprietary 30-60% Xn;R22. Xi;R41, FATTY ALCOHOL SURFACTANT #1 Proprietary 30-60% Xi;R38,R41,  And with harmless addition.
*See Section 16


  

       Irritant

Human Health  R 36/38 : Causes Irritation / Inhalation may cause headache & dizziness . Keep away from food, children , animal .

Inhalation

Supply fresh air on irritation  medical attention require & show this MSDS to physician.

Skin Contact 

In case of contact with skin , wash immediately with plenty of water and soap   Remove contaminated clothes. On extra irritation use ointement on Doctor advice.

Eye Contact

Flush with running water on open eyelids for at least 15 minutes, Immediately medical attention require.

Ingestion

Seek medical attention , don’t try to drink more water / milk because too much water increase the danger of vomiting . ( on vomiting always keep head low to prevent inhalation of airways )

Suitable


This product is not flammable. Use fire-extinguishing media appropriate for surrounding materials. , Water , fog or mist, alcohol-resistant foam, on small fires dry chemical, carbon dioxide (CO2) also can used.

Not Suitable 

Alcohol foam / and high pressure of water jet may cause splitting of excess materials.

Special

Container close to fire cooled immediately then remove to other place.

Precaution for fire-fighters Self contained breathing apparatus or apparatus should attached to air supply.

Note:Fired materilas vapours are heavier than air and may travel along the ground for.

Enviromental Precaution

Direct flow into drainage system, surface or ground water is  prohibited

Cleaning Method

for preventing the spreading of  materials remove spill mechanically or with absorbent materials and dispose of in accordance with section 13.Flush with large amounts of water to clean the area.Ventilate well. Personal: During usage of chemical personal should use all normal protective equipment and avoid contact with eye and skin and for use in close environment personnel should use respiratory breathing apparatus

Storage Ensure Adequate Ventilation

Condition to Avoid  

Flammable but product is stable under normal condition , take precaution as industrial chemical .

Materials  to Avoid

Do not subject directly to ALKALINE / Acidic medium.

Handling

Keep Container Tightly Closed in the original container and keep away from open flames / ignition sources.

Note

Eyewash facilities require at workplace

The product causes corrosion on skin and mucous membranes GENERALLY Pl. Note that In case of discharge of acidic or alkaline products into the sewerage system the pH must be in the range of 6-10 since higher or lower pH values may damage the sewerage system or impair biological dosage treatment plants. So that for maintaining pH we have to add acidic / basic medium neutaliser . For example if pH is less than 6 basic neutraliser is required and if pH is more than 10 acidic nature neutraliser is required. For details of any guideline pl. Visit our technical website www.rxmarine.com
• Dilute in water (always use plastic jar and RXSOL should be added to  water  never add water to RXSOL.)

Product Properties  

Respiratory System Protection

Approved respirator must be worn when spraying otherwise normally not required

Eye Protection 

If there is possibility to contact wear goggles for eye protection

Hand protection

Wear PVC chemical resistance protective gloves

Other Information   

Smoking in store / work area is prohibited.

2-BUTOXYETHANOL WEL 25 ppm 50 ppm Sk
ETHANEDIOL WEL 10 mg/m3 104 mg/m3 Sk
WEL = Workplace Exposure Limit.
Sk = Can be absorbed through skin.
ENGINEERING MEASURES
Provide adequate general and local exhaust ventilation.
RESPIRATORY EQUIPMENT
No specific recommendation made, but respiratory protection may still be required under exceptional circumstances when excessive air
contamination exists.
HAND PROTECTION
Use protective gloves.
EYE PROTECTION
Wear approved safety goggles.
OTHER PROTECTION
Wear suitable protective clothing as protection against splashing or contamination.
HYGIENE MEASURES
When using do not eat, drink or smoke. Wash promptly with soap & water if skin becomes contaminated. Wash at the end of each work
shift and before eating, smoking and using the toilet.

Appearance / odour        

Clear yellowish liquid / Mild

Density                  

g/cm3 at 15°C: 0.99

pH        
Flash Point
Boiling point             
Ignition temp                  

Neutral
76 ºC
>NA
>NA

SOLUBILITY       

Emulsifiable with water / soluble in most solvents

Avoid contact with acids and oxidising substances , Stable under normal condition  on access of heat Vapour/gas may form explosive mixtures with air.Hazardous Decomposition Products: No decomposition if stored  and used as directed.  In FIRE combustion CO, CO2 , NH3 , SOX etc hazardous gas produced.Note : MATERIALS TO AVOID Hydrocarbons and their derivatives may attack certain types of plastic, rubber and pain

Skin Irritation

Gives irritation may causes dryness. And prolonged contact with skin can cause degreasing effect.

Eye Irritat        

Cause severe irritation

Sensitization

Sensitizing properties not known

ChronicToxicity                      

Not Identified

Carcinogencity

Not regulated. ( prolonged inhalation of solvents may cause chronic  solvent intoxication.

RXSOL-10-1741 emulsifies in water and degradable ,  DEGRADABILITY
The surfactant(s) contained in this preparation complies(comply) with the biodegradability criteria as laid down in Regulation (EC)
No.648/2004 on detergents. 

 As per guide line of local rules and regulation and before disposal and neutralization pl. refer 07 article.

Goods classified for road /rail /

Sea transport

YES with

UN-no

3082

Proper shipping name

Environmentally hazardous liquid

contains  

(Alkyl (C3-C8) Benzenes)

 

Hazard identification no

90  Product identification

 

(UN) no

 3082

TREMCARD no.

CEFIC

90G01

 

 

Marine pollutant

Yes

 

 

 

Flash point

76 ºC

 

 

 

Labelcolour

White./Black.

 

 

 

Marine pollutant: No

Transport/Additional information

Contains: Aromatic Hydrocarbons, Alkyl (C3-C8)

R

phrases

R

51/53 Toxic to aquatic organisms/may cause long term adverse effects in the Environment

R

52 Marine Pollutant

R

65 Harmful: May cause lung damage if swallowed

S

phrases

S

23 Do not breathe vapour

S

24 Avoid contact with skin

S

60 This material and its container must be disposed of as hazardous waste

S

61Avoid spillage to the environment. Ask for special instructions/safety Datasheet

S

62 If swallowed, do not induce vomiting; seek medical advice immediately

S

36/37/39 Wear suitable protective clothing, gloves and eye/face protection.

REFERENCES Classified according to European directive on classification of dangerous preparations 90/492/EEC and accordance with EU directive 88/379. .
 

on the basis of information and experience as well as our present knowledge this guidelines is only  safe for  handling, use, processing, storage, transport, disposal and discharge; this is not a guarantee or quality of specification. And combination with other products will lost the properties. It is always the responsibility of the user to take all necessary steps  to ensure that information given here is read and understood by all who use, handle, dispose of or in any way come in contact with the product. It is not to be considered as a guarantee of the products properties. Disclaim: The information in this MSDS is meant as a description of  the safety requirements of our product.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Need a quote for this product?

Tell us the grade, packing and quantity you need — we ship across India and to major ports.

Request a quote office@kolkatachemical.com