Corrosion Inhibitor Additives for Water system ::: Alkaline Corrosion Inhibitor blend for multi-metal protection in closed-loop and chilled cooling water CLOSED circulating system.
This is a Highly effective INHIBITOR for closed loop , line chilled water with unique dual control of corrosion and scale from system.
This closed water treatment chemicals are designed to treat hot and chilled water systems. The product contains a combination of molybdate, borate, and silicate formulated to minimize corrosion and deposition. The product comes in a clear and also a variant pink appearance form.
RXSOL-40-4011-020 is a superior multifunctional, molybdate-based chemical treatment used for the control of corrosion in closed cooling systems and chilled water systems. RXSOL-40-4011-020 is a liquid product containing a combination of ferrous and non-ferrous corrosion inhibitors, a non-carbonate buffer, scale inhibitors, dispersants and a leak detection dye.
Cooling water treatment specified corrosion inhibitior for multi-metal containng cooling systems to operate at high or low temperatures
For systems containing no aluminium, RXSOL-40-4011-020 should be dosed at 0.5 to 1% (5 L–10 L/ 1000 L) in order to give a reserve of 50 ppm of sodium molybdate. For systems containing aluminium, the dosage of 1–1.5% should be added in order to maintain a minimum reserve of 100 ppm of sodium molybdate. In certain circumstances it may be necessary to adjust the pH separately by the addition of pH CONDITIONER - your Consultant will advise. In systems requiring significant passivation/higher initial dosages may be required to yield the required inhibitor residual.
Normal treated water control limits
pH 7.0 - 9.0 (Without Aluminium)
pH 7.0 - 8.0 (With Aluminium)
For systems containing aluminium it is important to maintain the system water pH in the range 7.0 - 8.0. Occasionally depending on the water characteristics and system treatment history the pH may rise above pH 8.0 which means that the risk of aluminium corrosion is increased - if this happens then high pH can be reduced by adding an appropriate quantity of pH Conditioner.
◦Very effective to Controls corrosion on brass, aluminum, steel, and stainless steel
◦Extends equipment life & Improves overall equipment efficiency
Keep in a tightly closed container in storage closed area . Recommended storage temperature is 500C
| Product Name | RXSOL-40-4011-020 |
| Product Type | Corrosion Inhibitor Multifunctional closed/chilled systems |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Kolkata, Chennai, Visakhpatnam, Fujairah, Muscat, Nairobi
| Phone | +91 22 65113333 / 5555 / 9999 / 27611360 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |
Substances which give the product
|
HYDROXYPHOSPHONIC ACID |
23783-26-8 |
01-05 |
|
SODIUM HYDROXIDE |
1310-58-3 |
01-04 |
| TOLUTRIAZOLE | 29385-43-1 | 0.5-01 |
| SODIUM Molybdate as Corrosion Inhibitor | 7631-95-0 | 10-20 |
| SODIUM BORATE as pH Buffer | 1303-96-4 | 0.1-0.5 |
| Silicate as a Aluminium Corrosion Inhibitor | 1344-09-8 | 09-10 |
| Azole as a Copper Corrosion Inhibitor | 109-97-7 | 01-02 |
| Properitory Blend of Polymer as a Dispersency Stabilization | --- | 10-20 |
|
Inhalation |
NOT APPLICABLE |
|
Eye Contact |
MAY CAUSE IRRITATION |
|
Skin Contact |
MAY CAUSE IRRITATION |
|
Ingestion |
MAY CAUSE IRRITATION. |
|
Inhalation |
NOT APPLICABLE |
|
Eye contact |
WASH IMMEDIATELY WITH PLENTY OF WATER |
|
Skin Contact |
REMOVE IMMEDIATELY CONTAMINATED CLOTHING AND WASH SKIN |
|
Ingestion |
DRINK PLENTY OF WATER |
| Information to Doctor: | NEAR NEUTRAL SOLUTION CONTAINING ORGANIC PHOSPHONATES |
| Fire and Explosion Hazards |
WATER BASED PRODUCT WITH NO SPECIAL HAZARDS |
| Precautions: | None |
| Extinguishing media: | NO SPECIAL MEDIA REQUIRED |
| Not suitable extinguishing media: | NONE |
ADSORB BY INERT MATERIAL.
FLUSH SPILL AREA WITH PLENTY OF WATER.
THE ALKALINE HAZARD OF THE PRODUCT IS REMOVED BY DILUTION WITH WATER
|
Handling |
WEAR GLOVES, EYE PROTECTION AND OVERALLS. |
|
Storage |
STORES INDOORS AND PREVENT FROM FREEZING. |
|
Exposure Control |
AVOID EYE AND SKIN CONTACT |
|
Personal protection |
WEAR GLOVES, GOGGLES AND OVERALLS WHEN HANDLING THE MATERIAL. |
|
Appearance |
Clear Liquid |
|
Boiling point |
100 C |
|
C Density [kg/m3] |
1.05-1.1 |
|
Flashpoint TCC |
NONE Vapour pressure [mm Hg] |
|
Pour point |
NONE Vapour density [a ir=1]: |
| Auto-ignition temp | NONE Soluble in organic solvent: NONE |
| Expl.omr. [vol%] Solubility in water [w-%]: | 100% |
| pH concentrate: | 11.5 - 12.0 pH |
| Rel. evaporation Rate. | N/A |
| Ether = 1 | Butylacetate = 10 0 |
| Freezing Point | >-20 Degree C |
|
Stability |
THE PRODUCT IS STABLE AND HAS A SHELF-LIFE OF 2 YEARS |
|
Avoid blending with |
ACIDS |
| Dangerous products of degradation | NONE |
| Dangerous products of combustion | NONE |
|
Analysis data |
LD [RAT] >50 00 mg/kg [CALCULATED] 50 CONSIDERED TO BE NON-TOXI |
|
Analysis data: |
LD RAINBOW TROUT > 500 mg/l [CALCULATED] 50 CONSIDERED TO BE OF NO DANGER TO THE ENVIRONMENT |
Remarks:
|
Recommendations: |
ALKALINE PRODUCT WHICH IN USE IS DILUTED DOWN CONSIDERABLY AND ALLOWED TO ENTER THE ENVIRONMENT. |
| UN no |
|
|
Packaging gr |
|
| ADR/RID | |
| IMDG class: Side | |
| EmS no | |
| MFAG no | |
| DGR: | |
| Goods description | |
| Others |
|
Chemical health hazard: |
HARMFUL/IRRITANT |
| Chemical to the environment |
. |
| Infla mmable product | |
| Explosive product | |
| Labelling category [-s]: | HARMFUL/IRRITANT |
| Symbol [-er]: | Xn, Xi |
| R-phrase [-s]: | R21-Harmful in contact with skin, R36-Irritating to eyes, R38-Irritating to skin |
| S-phrase [-s]: | S61-Avoid release to the environment, S45-In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). |
NO CARCINOGENIC PROPERTIES HAS BEEN FOUND WITH ANY INGREDIENTS.
NO EVIDENCE OF MUTAGENIC EFFECTS
EXPOSURE LIMITS NOT ASSIGNED
Legal Disclaimre:-
The above information is based on the present state of our knowledge of the product at the time of publication. It is given in good faith, No warranty is implied with respect to the quality or the specif ication of the product. The user must satisfy himself that the product is entirely suitable for his purpose.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.