RXSOL-81-8166-210 Corrosion Inhibitor Intensifier Hytemp O intensifier can be used from ambient temperature up to 400°F in Acidic medium like HCl / HF-based fluids.
RXSOL-81-8166-210 Corrosion Inhibitor Intensifier Hytemp O can be used from ambient temperature up to 400 degree F in HCl. This Inhibitor is highly effective in general purpose for acid corrosion inhabitation.
RXSOL-81-8166-210 Corrosion Inhibitor Intensifier Hytemp O to be used for oil and gas wells acidizing operation with hydrochloric acid concentration upto 32 % and Hydrofluoric Acid & also suitable with blend of of HCL/HF Acids commonly called MUD Acid,for bottom hole Temperature up to 350degree F
RXSOL-81-8166-210 Corrosion Inhibitor Intensifier Hytemp O provides excellent corrosion protection for sufface and down hole tubulaer goods and equipment used in acidizing operation.
| Function | HCl corrosion inhibitor intensifier |
| Form | Non-viscous liquid |
| Color | Clear, colorless |
| Temperature Range or Limit | Ambient up to 400°F (204°C) |
| Freezing Point | -16°F (-27°C) |
| Flash Point | 146°F (63.3°C) |
| Specific Gravity | 1.372 |
| Density | 11.43 lb/gal |
| pH | 0.61 (10% solution) |
| Product Name | RXSOL-81-8166-210 |
| Product Type | Corrosion Inhibitor Intensifier Hytemp O |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Fujairah, Mumbai, Kandla, Chennai, Vizag, Kolkata, Canada BC
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |
| Item | Percentage | Cas Number | Mark |
| Formic Acid | 90-95 | 000064-18-6 | Xn |
| Proprietory | 1-10 | NA | NA |
INHALATION: Inhalation of solution mist may cause respiratory tract irritation. May cause damage to nasal and respiratory passages. Coughing, chest pains, and breathing difficulty may occur. Gross inhalation may cause pulmonary edema.
INGESTION: HARMFUL OR FATAL IF SWALLOWED. Ingestion may cause severe irritation or burns to the mouth, throat and esophagus. May cause severe damage of gastrointestinal tract.
EYE CONTACT: MAY CAUSE EYE BURNS. Vapors are irritating to eyes. Contact with solution or mist may cause severe irritation or permanent eye damage.
SKIN CONTACT: Causes severe burns.
EXPOSURE LIMITS:
| HAZARDOUS COMPONENT | ACGIH TLV | OSHA PEL | LC50 (inhalation) | LD50 (oral) |
| Formic acid | 5 ppm | 5 ppm | 15 g/m3/15 min rat | 1100 mg/kg rat |
INHALATION:
If inhaled, remove to fresh air. If not breathing give artificial respiration, preferably mouth-to-mouth. If breathing is difficult give oxygen. Only trained personnel should administer oxygen. Get medical attention.
INGESTION:
Rinse mouth with water several times. DO NOT induce vomiting. Give victim plenty of water. Obtain medical assistance immediately.
EYES:
In case of contact, or suspected contact, immediately flush eyes with plenty of water for at least 15 minutes and get medical attention immediately.
SKIN:
Rush to the nearest hose or shower where the skin should be flushed with large amounts of water for at least 15 minutes while removing contaminated clothing. Get immediate medical attention.
FLASHPOINT (METHOD): 118-154°F
LOWER EXPLOSION LIMIT (% v/v): 18
UPPER EXPLOSION LIMIT (% v/v): 57
SPECIAL HAZARDS:
May form flammable vapour-air mixture. This product or a component there of can flow along surfaces to reach a distant ignition source and flash back.
EXTINGUISHING MEDIA:
Water fog, carbon dioxide, foam, dry chemical.
SPECIAL FIREFIGHTING PROCEDURES:
Fire-fighters should wear self-contained breathing apparatus and full protective clothing when fighting chemical fires. Cool exposed containers with water spray.
HAZARDOUS COMBUSTION PRODUCTS:
Oxides of carbon.
Wear specified protective equipment. Remove sources of ignition. Small spills - Cover spill with absorbent material. Scoop absorbed material into a suitable container for disposal. Large spills - Dike to contain. Prevent from entering sewers or waterways. Recover product to suitable containers or vessel for reuse, if possible, or for disposal. (Neutralization should be performed only under controlled conditions by specially trained personnel.) Use only explosion proof transfer equipment.
HANDLING:
Use only in a well ventilated area. Wear specified protective equipment. Use only spark-proof and explosion-proof tools and equipment.
STORAGE REQUIREMENTS:
Keep container tightly closed, in a cool, well ventilated place. Keep away from heat. Keep away from ignition sources. Keep away from incompatible materials.
SPECIFIC ENGINEERING CONTROLS:
Use only in a well ventilated area. Local exhaust.
PERSONAL PROTECTIVE EQUIPMENT:
Cartridge respirator. Chemical resistant goggles. Face shield. Butyl rubber gloves. Neoprene gloves. (Resistance to breakthrough > 480 min) Rubber boots. Rubber apron. Coveralls.
| PHYSICAL STATE: | Liquid |
| COLOR: | Colorless/pale yellow |
| ODOR: | Pungent |
| ODOR THRESHOLD: | Not available/applicable |
| SPECIFIC GRAVITY: | 1.2 @ 68 F |
| VAPOR PRESSURE: | 4.67 kPa @ 20°C |
| VAPOR DENSITY (air = 1): | 1.6 |
| EVAPORATION RATE: | 2 (n-butyl acetate = 1) |
| BOILING POINT: | 101 - 105°C |
| FREEZING POINT: | -13°C (85% sol.); +8°C (98% sol.) |
| pH: | 2.2 (1% sol.) |
| SOLUBILITY IN WATER: | Complete |
STABILITY:
Stable under normal conditions of use.
INCOMPATIBILITY/CONDITIONS OF REACTIVITY:
May react violently with strong acids (nitric, sulphuric), bases or oxidizers. Aluminum. Corrosive to steel.
HAZARDOUS THERMAL DECOMPOSITION PRODUCTS:
Carbon monoxide. Carbon dioxide.
HAZARDOUS POLYMERIZATION:
Will not occur.
CHRONIC EFFECTS: Respiratory ailments. Pulmonary edema. Liver and kidney damage.
SENSITIZATION: Not known.
CARCINOGENICITY: None of the components of this product have been listed as carcinogenic by IARC, NTP or OSHA. (IARCInternational Agency for Research on Cancer) (NTP - National Toxicology Program) (OSHA - Occupational Safety & Health Administration (US))
MUTAGENICITY: Not known.
REPRODUCTIVE TOXICITY: Not known.
No specific information available.
WASTE DISPOSAL: Disposal should be made in accordance with national and local regulations. Consult local waste authorities prior to disposal.
LAND TRANSPORT (DOT)
Proper Shipping Name: FORMIC ACID
UN/ID No.: UN 1779
Hazard Class - Primary: 8
Hazard Class - Secondary: 3
Packing Group: II
Reportable Quantity (RQ):
Emergency Response Guide #:
AIR TRANSPORT (ICAO/IATA)
Proper Shipping Name: FORMIC ACID
UN/ID No.: UN 1779
Hazard Class - Primary: 8
Hazard Class - Secondary: 3
Packing Group: II
MARINE TRANSPORT (IMDG/IMO)
Proper Shipping Name: FORMIC ACID
UN No.: UN 1779
Hazard Class - Primary: 8
Hazard Class - Secondary: 3
Packing Group: II
EmS: F-E, S-C
SARA TITLE III:
SECTION 302/304 This product does not contain substances listed in Appendix A and B as an Extremely Hazardous Substance.
SECTION 313 This product does not contain ingredients (at a level of 1% or greater) on the List of Toxic Chemicals.
TSCA INVENTORY: The substances in this product are included on or exempted from the TSCA 8(b) Inventory (40 CFR 710).
CALIFORNIA PROP 65: This product does not contain substances which require warning under California Proposition 65.
PRIORITY POLLUTANTS:None
The information contained herein is based on data considered accurate. However, no warranty is expressed or implied regarding the accuracy of these data or the results to be obtained from the use thereof. Vendor assumes no responsibility for injury to vendee or third persons proximately caused by the material if reasonable safety procedures are not adhered to as stipulated in the data sheet. Additionally, vendor assumes no responsibility for injury to vendee or third persons proximately caused by abnormal use of the material even if reasonable safety procedures are followed. Furthermore, vendee assumes the risk in his use of the material.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.