Cool Water Treat is an organic liquid corrosion coolant inhibitor with extended life for use in closed cooling water systems. This product offers protection for all commonly used materials in engine cooling water systems, including aluminum. Unlike other coolants, Cool Water Treat does not contain components subject to rapid depletion i.e. Nitrite and Silicate. Based on aliphatic acid technology Cool water Treat Corrosion Inhibitor is stable and hence the test frequency can be reduced. Cool water treat is fully organic and biodegradable.
Cool Water Treat is a highly effective corrosion inhibitor for all common metals in cooling water systems. Testing has shown no detrimental effects on non metallic substances such as seals, glands, packing, hoses, gaskets etc., normally used in these systems. Where most traditional inhibitors react with the metal surface and form oxides that prevent further corrosion, Cool Water Treat applies a thin and durable layer of protective molecules to the metal surfaces. This technology prevents the continuous build-up of insulating layers on heat transfer surfaces. For new builds, RXSOL Ships Service recommends cleaning of the water system before commencing service. The system will always contain small amounts of oil and iron oxides, and this can be removed in one operation. If the system is corroded or is more heavily contaminated, degreasing scale is recommended. For systems previously treated with other products, RXSOL Ships Service recommend to drain and flush the system before refilling with distilled water and Cool Water Treat . The system should be clean and free from scale and corrosion products when starting the treatment. The use of antifreeze is sometimes required if the vessel is to be laid up in cold areas, Cool water treat can be used in conjunction with glycols for frost protection. If used in conjunction with glycols, It is recommended to increase the product concentration to 8%.*
Cool Water Treat should be dosed to a suitable point in the system. If the expansion tank is used, adequate circulation must be assured.
Dosing and Control
Initial dosage for an untreated system is 60 litres of Cool Water Treat Cool water Treat Corrosion Inhibitor / ton of untreated distilled water (6%). This will provide sufficient protection of the system for a period of two to five years under normal conditions. 6% Cool water Treat Corrosion Inhibitor should also be dosed in all make up water added to the system to compensate for lost coolant. The engine manufacturer's recommendations for water quality should always be complied with. Chloride levels should always be as low as possible. Most engine manufacturers recommend a maximum of 50 ppm chlorides. For this reason, RXSOL Service recommends the use of distilled water as make-up.
|
APPEARANCE |
Colorless liquid |
|
Density, g/cm3 at 20°C: |
1.055 |
|
pH |
8.2 |
|
COMPATIBILITY |
|
|
Metal |
All commonly used |
|
Rubber |
No known effect |
- Liquid product, easy to use
- Environmentally friendly, fully organic product, low toxicity
- Effective against cavitation and erosion. Superior heat transfer properties
- Compatible with hoses, gaskets and seals
- Compatible with glycols for frost protection
- Stable product-non depleting
- The product can be used for corrosion inhibition in many types of closed re-circulation system cooling water systems
- Approved by major engine manufacturers
| Product Name | RXSOL-40-4012-020 |
| Product Type | Cool water Treatment chemicals |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock : Mumbai, Kandla, Chennai, Kolkata, Vizag, Fujairah, Muscat
| Phone | +91 22 65113333 / 5555 / 9999 / 27611360 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |
|
Chemical Name |
Concentration |
CAS Number |
EC Number |
R Phrases* |
Symbols Disodium |
|
Ethylhexanoic compound, |
20-35 |
N/A |
205-743-6 |
63 |
Xn |
|
2-sodium salt Tolyltriazole |
1-3 |
29385-43-1 |
29385-43-1 |
22 |
Xn |
|
Non classified ingredients |
60-100 |
|
|
|
*See Section 16
|
Odour |
odourless |
|
Appearance |
Liquid, colourless, soluble in water |
|
Contact with eyes |
Causes redness and irritation |
|
Contact with skin |
In cases of severe exposure, severe irritation may develop |
|
Inhalation |
Vapours or aerosols may cause irritation of eyes, nose and respiratory tract |
|
Ingestion |
The ingestion of significant quantities may cause gastro-intestinal disturbances |
|
Contact with skin |
Wash affected area with plenty of soap and water |
|
Contact with eyes |
If substance has got into eyes, immediately wash out with plenty of water for at least 15 minutes |
|
Ingestion |
|
|
Inhalation |
|
|
General |
In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) (S45) |
|
Fire-fighting measures |
|
|
Personal Precautions |
Wear protective clothing as per section 8 |
|
Environmental Precautions |
Do not allow to enter public sewers and watercourses |
|
Clean Up Actions |
|
|
Handling |
- Wear protective clothing as per section 8 - Avoid contact with skin and eyes (S24/25) - Eyewash bottles should be available |
|
Storage |
- Keep in a cool, dry, well ventilated place - Protect from frost - Protect from heat |
|
Exposure Limits |
There are no recommended or established controls for this product |
|
Exposure controls |
The undiluted product must not be used in a confined space without good ventilation |
|
Occupational exposure controls |
- No respiratory protection is required unless subject to contact with substance mist - Wear suitable protective clothing, including eye/face protection and gloves (plastic or rubber are recommended)
|
Gloves Goggles Suit No_Smoking
|
Odour |
Odourless |
|
Appearance |
Liquid, colourless, soluble in water |
|
pH |
8.2 at 5 % concentration, pH ~ 9.5 at 100 % concentration |
|
Vapour pressure |
not known |
|
Freezing point |
0 °C to 760 °C |
- This article is considered stable under normal conditions
- Avoid overheating, Keep away from frost
- Incompatible with strong oxidizing substances, Contact with acids liberates toxic gas (R31)
- See Section 5
|
Toxicological information |
- Possible risk of harm to the unborn child (R63) - In cases of severe exposure, redness and irritation may develop - The ingestion of significant quantities may cause nausea/vomiting |
|
Contact with skin |
In cases of severe exposure, severe irritation may develop |
|
Contact with eyes |
Causes redness and irritation |
|
Ingestion |
- The ingestion of significant quantities may cause gastro-intestinal disturbances - May cause nausea/vomiting |
|
Carcinogenicity |
No evidence of carcinogenic effects |
|
|
- Do not discharge into drains or the environment, dispose to an authorised waste collection point
- Disposal should be in accordance with local, state or national legislation
- Not classified as hazardous for transport
|
Risk Phrases |
Possible risk of harm to the unborn child (R63) |
|
Safety Phrases Irritant |
- Wear suitable gloves and eye/face protection (S37/39) - If swallowed seek medical advice immediately and show this container or label (S46) |
Text of R and S phrase codes used in this safety data sheet:- R34: Causes burns; R36: Irritating to eyes; R37: Irritating to respiratory system; R41: Risk of serious damage to eyes. The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications - usage in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from manufacturer
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.