Stop Gelling, Increase Lubricity PREVENTS DEPOSITION and Separates water is main principal of RXSOL COLD FLOW IMPROVER. Highly effective flow improver for heating oil, diesel and super diesel. This is an excellent product for cold weather operability with distillate fuel. The product help to improve the cold flow properties of a distillate fuel and reduce the operational temperatures of Pour Point and Cold Filter Plugging Point. RXSOL CFID help to reduce the size of waxes formed and reduce the risk of wax sedimentation in fuel tanks and pipe lines.
Suitable for all diesel engines, Tank and facility use. Also for all heating oil tanks. Helps to prevent cold start and cold running problems in low temperature climate circumstances by anti-gel performance. With Diesel Cold Flow Improver, it is possible to lower the temperature at which the wax crystals will block the filters (Cold Filter Plugging Point) and the temperature at which the diesel freezes (Pour point).
Operating instructions
In diesel : Add to fuel tank before it reaches the 0 °C limit.
With heating oil: Add to tank before it reaches the 0 °C limit.
Dose ::
RXSOL CFID should be dosed to the fuel tank prior to filling. Recommended dosage is one liter to one thousand liter of fuel (1:1000 or 1000 ppm). In case of poor response dosage can be increased to one liter to five hundred liter of fuel (1:500 or 2000 ppm)
Please note: The dosing temperature should always be at least 5oC above the measured cloud point of the fuel.
| Dosage of product | 1 ton fuel / Diesel | 10 ton fuel / Diesel | 50 ton fuel / Diesel | 100 ton fuel / Diesel |
| 1000 ppm | Dose 1 ltr | Dose 10 ltr | Dose 50 ltr | Dose 100 ltr |
| 2000 ppm | Dose 2 ltr . | Dose 20 ltr | Dose 100 ltr | Dose 200 ltr |
| Form | Liquid |
| Colour | Clear to Light Yellow |
| Odour | Hydrocarbon-like. |
| Specific Gravity20 °C | 0.90 |
| pH | Not Applicable |
| Pour Point | -6°С |
| Flush Point | > 60°С |
| Solubility | Soluble in Hydrocarbon and Aromatic Solvents |
Features
- Cold flow improver and pour point depressant
- Delays the onset of paraffin crystallization to improve cold flow properties
Benefits
- Enables you to handle the fuel at lower temperatures
- Adds safety in handling of the fuel by reducing the pour point and the Cold Filter Plugging Point of the fuel
- Keep the wax in suspension preventing wax sedimentation and accumulation
| Product Name | : | RXSOL 70-7017-025 |
| Product Type | : | Cold Flow Improver Middle Distillates Diesel FUEL TREATMENT |
| Revised Date | : | 5th Jan'23 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch Stock Point : Koltkata, Mumbai, Chennai, Visakhapatnam, Kandla - Gandhidham, Fujairah, Kenya, Nairobi, Canada
| Phone | : | +91 22 27815541 / 42 |
| Fax | : | +91 22 2781 1318 :::AOH :0091 9821214367 |
| : | mail@rxmarine.com |
|
Chemical Name |
Concentration |
CAS Number |
EC Number |
R Phrases* |
Symbols |
|
Naphtha(Petroleum) |
30-40 |
64742-82-1 |
265-185-4 |
65, 66 |
Xn |
| Xylenes (o-, m-, p- isomers) | 0.1 - 1 | 1330-20-7 | |||
| Distillates, petroleum, hydrotreated light naphthenic | 30 - 40 | 64742-53-6 | |||
|
Iron Carboxylate |
1-5 |
61788-81-6 |
N/A |
65 |
Xn |
| Stoddard solvent | 10-20 | 8052-41-3 | |||
|
Fuel Diesel |
5-10 |
68334-30-5 |
269-822-7 |
40 |
Xn |
| Solvent naphtha, petroleum, heavy aromatic | 0.1 - 1 | 64742-94-5 | |||
| Petroleum distillates, hydrotreated light | 10-20 | 64742-47-8 | |||
| Benzene, 1,2,4-trimethyl | 1-5 | 95-63-6 | |||
|
N-Oleyl-1,3diaminopropane |
0-1 |
7173-62-8 |
230-528-9 |
22 34 50 |
C,N |
| Solvent naphtha, petroleum, light aromatic | 1-5 | 64742-95-6 | |||
| Ethylbenzene | 0.1-1 | 100-41-4 | |||
|
Aminoethylpiperazine |
0.05 |
140-31-8 |
205-411-0 |
21/22, 34,43, 52/53 |
C |
| Nonane | 0.5-1.5 | 111-84-2 | |||
| Naphthalene | 0.1-1 | 91-20-3 |
|
Odour |
Smells of hydrocarbon. |
|
Appearance |
Liquid, dark, brown, insoluble in water. |
|
Contact with eyes |
Causes redness and irritation. |
|
Contact with skin |
Prolonged skin contact will result in defatting of the skin, leading to irritation, and in some cases, dermatitis. |
|
Inhalation |
In cases of severe exposure, anaesthesia may develop, May cause chronic pneumonitis, May cause coughing. |
|
Ingestion |
Harmful: may cause lung damage if swallowed (R65).Limited evidence of carcinogenic effect (R40). |
|
Contact with skin |
Remove contaminated clothing immediately and drench affected skin with plenty of water Contaminated clothing should be laundered before reuse.Seek medical attention if irritation persists |
|
Contact with eyes |
If substance has got into eyes, immediately wash out with plenty of water for at least 15 minutes Irrigate eyes thoroughly whilst lifting eyel.When in doubt or symptoms persist, seek medical attention |
|
Ingestion |
Do not induce vomiting because of risk of aspiration into the lungs. If aspiration is suspected obtain immediate medical attention.If vomiting occurs turn patient on side.Obtain immediate medical attention |
|
Inhalation |
Remove patient to fresh air.Seek medical attention if ill effects occur |
|
General |
In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) (S45). |
- Auto-ignition point 250 deg C at 760 mm Hg
- Flash point >62 deg C (CC)
- Carbon oxides may be formed
- In case of fire use water spray or fog, alcohol resistant foam, dry chemical or carbon dioxide (S43)
- Do not use water jets
- Prevent run off water from entering drains if possible
- Vapours are heavier than air and may travel considerable distances to a source of ignition and flashback
|
Personal Precautions |
Wear protective clothing as per section 8. |
|
Environmental Precautions |
Do not allow to enter public sewers and watercourses. |
|
Immediate Actions |
Contain spillage by any means possible |
|
Clean Up Actions |
Absorb spillage in inert material and shovel up.Ventilate the area and wash spill site after material pick-up is complete. |
|
Special Precautions |
Do not allow to enter public sewers and watercourses.Wear protective clothing as per section 8. |
|
Handling |
Avoid contact with skin and eyes (S24/25).Eyewash bottles should be available.Wear protective clothing as per section |
|
Storage |
Keep only in the original container in a cool, well ventilated place (S3/9/49).Keep container tightly closed (S7).Keep away from open flames, hot surfaces and sources of ignition. |
|
Exposure Limits |
TLV (TWA) 275 mg/m3 (Naphtha, low boiling, hydrogen treated) |
|
Exposure controls |
No special ventilation is required unless the product is used in a spray form |
|
Occupational exposure controls |
No respiratory protection is required unless subject to contact with substance mist.During fumigation/spraying wear suitable respiratory equipment (S42).Wear suitable protective clothing, including eye/face protection and gloves (neoprene or nitrile are recommended) |
|
Odour |
Smells of hydrocarbon |
|
Appearance |
Liquid, dark, brown, insoluble in water |
|
pH |
Not applicable |
|
Boiling point |
170 °C to 210 °C at 760 mm /Hg |
|
Vapour pressure |
Not known |
|
Vapour density |
(air = 1) >1 |
|
Freezing point |
unknown |
|
Insoluble in water |
|
|
Specific gravity (water=1) |
0.835 |
|
Flash point > |
62 deg C (CC) |
|
Auto-ignition point |
250 deg C at 760 mm Hg |
|
Lower explosive limit |
0.5 % (in air) |
|
Upper explosive limit |
7 % (in air) |
- This article is considered stable under normal conditions
- Keep away from naked flames, incandescent or hot surfaces
- See Section 5
|
Toxicological information |
No experimental data available. |
|
Inhalation |
Inhalation of solvent vapours may give rise to nausea, headaches and dizziness |
|
Contact with skin |
Prolonged skin contact will result in defatting of the skin, leading to irritation, and in some cases, dermatitis.Contains Aminoethylpiperazine. May produce an allergic reaction. |
|
Contact with eyes |
Causes irritation. |
|
Ingestion |
Aspiration hazard , Harmful: may cause lung damage if swallowed (R65). |
|
Carcinogenicity |
Limited evidence of carcinogenic effect (R40). |
|
Ecotoxicity |
May cause acute effects in the aquatic environment.This product contains components which are classified in the EU as dangerous for the environment. |
|
Mobility |
Insoluble in water |
|
Persistence and Biodegradability |
The components in this product are readily biodegradable. |
|
Bioaccumulation Potential |
Hydrocarbon solvents have the potential to bioaccumilate. |
|
Other Adverse Effects |
No environmental problems are expected when the product is used / handled correctly.In its intended use, the product will not be released into the environment. |
|
Classification |
EU Waste class: 07.01.This material and/or its container must be disposed of as hazardous waste |
|
Disposal considerations |
Do not discharge into drains or the environment, dispose to an authorised waste collection point.Disposal should be in accordance with local, state or national legislation |
Not classified as hazardous for transport.
|
Classification and labelling |
Contains Aminoethylpiperazine. May produce an allergic reaction. |
|
Risk Phrases |
Limited evidence of carcinogenic effect (R40).Harmful: may cause lung damage if swallowed (R65).Repeated exposure may cause skin dryness or cracking (R66).Contains Dimethylpiperazine. May produce an allergic reaction. |
|
Safety Phrases |
Wear suitable protective clothing, eye/face protection and gloves (S36/37/39).In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) (S45).If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label (S62). |
Text of R and S phrase codes used in this safety data sheet:- R21/22: Harmful in contact with skin and if swallowed; R22: Harmful if swallowed; R34: Causes burns; R40: Limited evidence of carcinogenic effect; R43:May cause sensitisation by skin contact; R50: Very toxic to aquatic organisms; R52/53: Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment; R65: Harmful: may cause lung damage if swallowed; R66: Repeated exposure may cause skin dryness or cracking.The information provided about the product on this Safety Data Sheet has been compiled from knowledge ofthe individual constituents The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications - usage in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from manufacturer.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.