RXSOL CTL COIL TUBING LUBRICANT is an organic polymer lubricant for water based drilling fluids as well as for Olefin enhanced muds OEM. It is a blend of non-ionic and anionic surfactants in an aqueous solution. It is a nano technology based reactive fluid system that has the ability to penetrate friction surfaces shielded at the molecular level. This proprietary blend is specifically engineered for dispersion. RXSOL CTL allows the formulation of muds with exceptional friction reduction properties where steel-to-steel and steel-to-formation contact is present. Its creates a unique type of drilling fluid showing both excellent dynamic and static performance that is indicated by low friction factors and improved rheology values. Return permeability tests show no formation damage and in some cases an improvement in return permeability.
RXSOL Coil Tubing Lubricant is a high-performance water-soluble anionic polymer-based lubricant specifically formulated to reduce friction and torque during coil tubing operations in oilfield and industrial applications.
The product forms a thin, lubricious polymer film on metal surfaces, significantly minimizing drag, wear, and energy consumption. It is particularly effective in extended reach wells, deviated drilling, and high-friction environments.
RXSOL CTL (COIL TUBING LUBRICANT) is an proprietary cosolvent and surfactant blend that is highly effective as a brine and drilling fluid lubricant and friction reducer in all water-base completion fluids and drilling fluids.
Horizontal Drilling: Using RXSOL CTL in drilling fluids is ideal for horizontal and deviated wells. When drilling horizontally with conventional fluids, friction may occur as torque, drag and stacking up of weight causing “slide” problems for the drill string. The problems with “sliding” will be minimized since RXSOL CTL has a high affinity for metal surfaces and forms a lubricating film on the coil and drillpipe that adheres tenaciously.Therefore, due to the superior friction reduction properties of RXSOL CTL , horizontal and deviated wells will be drilled faster at a lesser cost due to the reduction of torque, drag and a better control of bit weight. PDC bits may be used more frequently instead of tricone bits, as bit weight and stall outs can be controlled in a better manner.
Multilateral Wells: RXSOL CTL (COIL TUBING LUBRICANT) will give you the best friction reduction due to its extremely high attraction to metal surfaces. This (polar) attraction increases the efficiency of RXSOL CTL as it initially adheres to metal instead of other surfaces such as drill solids. This metal affinity allows the bottom hole assembly and drill pipe to coat much quicker than standard water soluble or dispersible lubricants. This allows for a more effective and efficient lubricating process.
Liner Operation: RXSOL CTL will improve friction conditions when running liners with minimum tolerances and/or slotted production liners. Simply place the pill with RXSOL CTL inside the casing shoe and run the liner through the pill. ECONOLUBE will reduce the friction drastically, aid installation of the liner and obtain rotation prior to cementing.
What is the use of coil tubing friction drag reducer?
Coil Tubing Friction Reducer is used widely in Oil and Gas Applications. Some of the key areas of application are:
- Coil tubing operations
- Horizontal and directional drilling
- Workover and completion fluids
- Pipeline pigging and cleaning
- Wireline and downhole tool lubrication
- High-friction fluid systems
RXSOL CTL (COIL TUBING LUBRICANT) works well in both oil and water-based drilling systems. If intended for use solely as a lubricant, dilute the product to 0.5 to 3.0% for the entire system. Running RXSOL CTL as a concentrated pill sweep is an excellent way to clean the hole and come up to the desired concentration of lubricant at the same time. RXSOL CTL can remove sand or build mud as high as 20 lb/gal.
| Application Condition | Dosage Range |
|---|---|
| Normal operations | 0.5 – 1.5 % v/v |
| High friction conditions | 1.5 – 3.0 % v/v |
| Severe conditions | Up to 5.0 % v/v |
- Add directly to the fluid system through mixing hopper or circulation system
- Ensure uniform distribution by adequate agitation
- Compatible with most additives used in water-based systems
- Brines (NaCl, CaCl₂, KCl)
- Common drilling and completion additives
- Polymers and viscosifiers
- Corrosion inhibitors
|
Form |
Liquid |
|
Flash Point |
>98.3° C |
|
Odor |
Characteristic |
|
pH |
6 – 8 |
|
Sp. Gravity |
1.05-108 |
| Solubility | Completely Water Soluble |
Features & Benefits
- Drill longer horizontal sections - HTHP operational to Max. 270°C
- Increased (improved) rate of penetration - Wells turn cost effective with water
- Cut total drilling cost based muds (Replaces OBM)
- Reduce pump pressure by more than 15% - Will keep your shale shaker screens
- Reduced rotating torque inside casing and clean and reduce screen costs.
- Reduced friction problems to drill in oriented -
- It is stable to 165 deg.C
- Compatible with nitrile elastomers
- Has been used in both oil and gas wells
- Has been premixed with diesel
- Used successfully in drilling fluids
- In coiled tubing, wireline, snubbing and completion installation operations
- May be used as a well clean-up spacer
What are the advantages of using Coil Tubing Lubricant
- Excellent friction reduction and drag control
- Improves rate of penetration (ROP)
- Enhances tubing life by reducing wear
- Compatible with most water-based fluid systems
- Effective in fresh water, brine, and hard water
- Low foaming characteristics
- Easy to mix and handle
- Stable under wide temperature and pressure conditions
- Environmentally acceptable (non-hydrocarbon based)
| Product name | RXSOL-81-8153-210 |
| Product type | Coil Tubing Lubricant |
Company Details
RX MARINE INTERNATIONAL
105 , A-wing, BSEL TECH PARK
VASHI , NEW BOMBAY 400705
INDIA
Stock Branch ::: Mumbai, Kandla, Chennai, Ennore, Visakhapatnam, Gangavaram, Kolkata, Haldia, Surat, Fujairah, Muscat
| Phone | +91 22 20871200 / 20871300 / 201871400 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |
| Chemical Name | CAS No. |
|---|---|
| Proprietory polymer blend | Trade Secret |
|
Odour |
Odourless |
|
Appearance |
Liquid, clear |
|
Contact with eyes |
Can cause damage to the eyes |
|
Contact with skin |
Can cause damage to the skin |
|
Inhalation |
Vapours or aerosols may cause irritation of eyes, nose and respiratory tract |
|
Ingestion |
The ingestion of significant quantities may cause damage to stomach lining |
|
Environmental Hazards |
None |
|
Human Health Hazards |
Moderates |
|
General |
In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) (S45) |
|
Inhalation |
Harmful,. supply or remove to fresh air and seek medical advice attention |
|
Skin Contact |
May cause irritation Rinse with running water and soap. Skin care. Remove contaminated clothes. Remove contaminated clothing immediately and drench affected skin with plenty of water. Then wash with soap and water Seek medical advice if necessary Contaminated clothing should be laundered before reuse |
|
Eye Contact |
If substance has got into eyes, immediately wash out with plenty of water for at least 15 minutes ( Flush with running water for at least 15 minutes Immediately . ) Obtain immediate medical attentionContinue flushing with water until medical help arrives |
|
Ingestion |
Vomiting is dangerous , seek medical attention. ( Do not induce vomiting ) Never give anything by mouth to an unconscious person Give plenty of water to drink Obtain immediate medical attention |
Non combustible Decomposition products may include toxic and irritant fumes Not flammable. In case of fire use extinguishing media appropriate to surrounding conditions
|
Suitable |
N.A. can use foam dry Co2 , water-spray. |
|
Not suitable |
Not applicable |
|
Special |
Not applicable |
|
Protection of fire Fighter |
Not applicable |
|
Flashpoint |
> 250º C |
|
Special protective equipment for fire-fighters |
Wear protective equipment. |
|
Personal Precautions |
Wear protective clothing as per section 8 |
|
Environmental Precautions |
Do not allow to enter public sewers and watercourses |
|
Immediate Actions |
Contain spillage by any means possible |
|
Clean Up Actions |
Absorb spillage in inert material and shovel up Ventilate the area and wash spill site after material pick-up is complete |
|
Special Precautions |
Wear protective clothing as per section 8 |
|
Enviromental Precaution |
Direct flow into drainage system, surface or ground water is prohibited. |
|
Cleaning Method |
Flush Spill Area with Water andremove with liquid-absorbing material like foam sand,sawdust etc.. |
|
Handling |
The usual precautions for handling chemicals should be observed See Section 8 Eyewash bottles should be available. |
|
Storage |
Keep only in the original container in a cool, well ventilated place (S3/9/49) Protect from frost. |
| Condition to Avoid | Non flammable but avoid direct heating |
| Materials to Avoid | Do not subject to Acidic / Oxidizing Agents. |
| Handling | Keep Container Tightly Closed |
NOTE : Eyewash facilities require atworkplace The product causes corrosion on skin and mucous membranes Pl. Note that In case of discharge of acidic or alkaline products into the sewerage system the pH must be in the range of 6-10 since higher or lower pH values may damage the sewerage system or impair biological dosage treatment plants. So that for maintaining pH we have to add acidic / basic medium neutaliser . For example if pH is less than 6 basic neutraliser is required and if pH is more than 10 acidic nature neutraliser is required. For details of any guideline pl. Visit our technical website www.rxmarine.com
- Dilute in water (always use plastic jar and RXSOL should be added to water never add water to RXSOL.)
|
Exposure Limits |
There are no recommended or established controls for this product |
|
Exposure controls |
No special ventilation is required unless the product is used in a spray form |
|
Occupational exposure controls |
Wear suitable protective clothing, including eye/face protection and gloves (plastic or rubber are recommended) During fumigation/spraying wear suitable respiratory equipment (S42) |
|
Personal protection |
|
|
Respiratory System Protection |
Approved respirator must be worn when spraying |
|
Eye Protection |
wear eye protection (on possibility of contact ) |
|
Hand protection |
wear PVC chemical resistance protective glove |
| Parameter | Specification |
| Appearance | Clear to slightly hazy viscous solution |
| Odour | Odourless |
| Solubility | Soluble in water; produces highly viscous solution |
| Boiling Point (°C) | No Data Available |
| Melting Point (°C) | No Data Available |
| Vapour Pressure (mmHg) | No Data Available |
| Percent Volatiles (vol %) | No Data Available |
| Evaporation Rate | No Data Available |
| pH (1% solution) | 6 - 8 |
| Specific Gravity | 1.0 min |
| First Aid Measure | Description |
|---|---|
| Eye Contact | Rinse immediately with plenty of water for at least 15 minutes. Seek medical attention if irritation persists. |
| Skin Contact | Wash with soap and water. Remove contaminated clothing and wash before reuse. |
| Inhalation | Move to fresh air. If breathing difficulty occurs, seek medical attention. |
| Ingestion | Do not induce vomiting. Rinse mouth and seek medical attention immediately. |
|
Toxicological information |
No experimental data available. |
|
Inhalation |
Vapours or aerosols may cause irritation of eyes, nose and respiratory tract. |
|
Contact with skin |
Prolonged skin or eye contact may cause chemical burns. |
|
Contact with eyes |
Prolonged skin or eye contact may cause chemical burns. |
|
Ingestion |
The ingestion of significant quantities may cause burning sensation. |
|
Carcinogenicity |
No evidence of carcinogenic effects. |
|
Inhalation |
Vapours or aerosols may cause irritation of eyes, nose and respiratory tract. |
|
LD50 (oral) |
> 2000 mg/kg - (Polyvinyl alcohol, partly saponified). |
No components of this material are toxic to aquatic organisms, product are readily biodegradableas by mixing with water.
|
Disposal considerations |
Non hazardous. Disposal should be in accordance with local, state or national legislation. |
Transport over land ADR/RID : Not classified as hazardous for transport
|
Classification and labelling |
Not classified as hazardous for users- S2 : Keep out of reach of children S26 : Incase of contact with eyes, rinse immediately with plenty of water and seek medical advice. S28 : After contact with skin, wash immediately with plenty of water. S37/39 : Wear suitable gloves and eye/face protection. |
This information is based on our current level of knowledge and relates to the product in the state in which it is delivered. It is intended to describe our products from the point of view of safety requirements and is not intended to guarantee any particular properties Text of R and S phrase codes used in this safety data sheet
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.