Name: Cement Remover RX Hold
Brand: Kolkata Chemical
Availability: InStock

It is highly concentrated and powerful penetrating agents materials which is effectively react with cement to loosen the bonding strength . Best results can obtain on dry surface of cement. RXSOL'S R & D has developed this molecular cement dissolver as an alternative to using hazardous acids for concrete removal. Back-Set is a one-of-a-kind formula. It uses an active ingredient found in sugar cane syrup, and is completely biodegradable.

RXSOL-22-2202-025 turned this vulnerability into an opportunity. "Back-Set" safely removes hardened concrete from a variety of difficult to clean surfaces. It break down the ionic bond in portland cement, releasing the cement from any surface to which it has adhered.

This liquid mixture specifically designed to deal with hard cases of cement cargo deposits or dry cement stains. Its proven advantage is the provision of immediate penetration and complete dissolution of cement, the result being a thorough cleaning.

Chemically Back-Set converts the positive ions in the hardened matrix into negative ions, which dissolves the cement into mud that can be rinsed away. Because it works chemically, rather than mechanically, Back-Set may be used to remove cured concrete, mortar, grout, and stucco from virtually any surface without harm.

Application

The hardened concrete is saturated with Back-Set, either with a brush or by spraying. After 15-20 minutes, the area is again saturated with the chemical. The concrete typically begins to soften in 20-30 minutes, and can be rinsed off with water.

Dose

Excellent , concentrated and very effective cement remover with powerfull dissolving properties used on cement and bulk carriers.

The hardened concrete is saturated with Back-Set, either with a brush or by spraying. After 15-20 minutes, the area is again saturated with the chemical. The concrete typically begins to soften in 20-30 minutes,and can be rinsed off with water.The amount required for dosage can be obtained BY knowing the deposition composition as well as nature of cement to be removed.5 to 20 % recommended .These are recommended values based on experience. For optimum results dose RXSOL-22-2202-025 directly to the surface .

The amount required for dosage can be obtained BY knowing the deposition composition as well as nature of CEMENT to be removed . 5 to 20 % recommended .These are recommended values based on experience.

For optimum results dose RXSOL-22-2202-025 directly to the surface

Undiluted : In cases where we deal with heavy deposit build–up, CEMENT REMOVER must be applied undiluted.
Diluted : In cases of light deposition, on large surface areas, a solution between 10–40% may be used.

B. Cleaning Procedure

Undiluted/Diluted: In parts such as corner cavities, tank skeleton inlets, etc, Apply RXSOL-22-2202-025 through hard brush, mop, sponge or any other manual method. Let it soak for 15 minutes. Afterwards, wash thoroughly by applying high–pressure water source. In case of deposit persistence, repeat the cleaning procedure.

Refer to technical datasheet.

METHOD :::
1.For heavy deposition and thick layers of cement, a concentrated and stronger cleaner will be necessary to cut through the layers of cement.
2.Use a scraper, metal scrubber or flat head screwdriver to remove as much of the cement as possible.
3.For the remaining cement, apply this chemical
4.Once the cement loosens, scrub the area with a scrubber until it is all removed from the surface.
5.Rinse the area well with clean water.
6.Clean the area with alkaline soap and water
7.Flush system completely.

Technical specifications

Note

Other Valuable Hold Cleaners :::

Cement Remover RX Hold ::: Highly concentrated and powerful penetrating agents materials which is effectively react with cement to loosen the bonding strength . Best results can obtain on dry surface of cement. RXSOL'S R & D has developed this molecular cement dissolver. Part No.- RXSOL-22-2202-025, Part No.- RXSOL-22-2202-020, Part No.- RXSOL-22-2202-050

Part No.- RXSOL-22-2202-035, Part No.- RXSOL-22-2202-210

Slip Barrier Coat RXSOL HOLD BLOCK ::: Polymer EMULSION BASED non reactive coating materials which makes thin film barrier on surface after dry. Due to formation of RXSOL THIN barrier film on surface, the cleaning operation after unloading becomes quicker and easier with optimum results. Part No.- RXSOL-22-2210-210, Part No.- RXSOL-22-2210-025, Part No.- RXSOL-22-2210-050

BARRIER HOLD COAT ::: Highly effective ecofriendly Product blending of natural ingredients which is provide thin temprory film on Hold Surface to protect corrosion. This is making barrier between corrosive cargo like Sulphur, Salt, Petcoak, Cement etc and Hold surface. Part No.- RXSOL-22-2211-210

COAL REMOVER rx hold ::: A powerful penetrating mixed chemical products to remove heavy coal deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems. Part No.- RXSOL-22-2215-210, Part No.- RXSOL-22-2201-025, Part No.- RXSOL-22-2201-050

Hold Wash Concentrate RX ::: RXSOL hold wash is a versatile all purpose marine cleaning solution it can be used as a powerful stand alone cleaner for Petroleum oily stains and residues, vegetable and animal fats, as well as dirt, proteins, soils, coal, ore, coke or in combination. Part No.- RXSOL-22-2204-210, Part No.- RXSOL-22-2204-025, Part No.- RXSOL-22-2204-050

Rock Phosphate Cleaner rx hold ::: A powerful penetrating mixed chemical products to remove heavy Rock Phospate deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems. Part No.- RXSOL-22-2201-210

PCS Hold Clean ::: RXSOL PCS is an innovative, concentrated liquid product specifically engineered to attack, penetrate and remove Coal Carbon, pet coke, lime deposition accumulations from cargo and storage tanks, Also Developed for cargo hold cleaning to remove stains. Part No.- RXSOL-22-2208-210

HBI CARGO Hold Wash Concentrate RX::: RX HBI CARGO Hold Wash Concentrate RX is a versatile all-purpose QUALITY marine cleaning solution. It can be used as a powerful stand-alone cleaner for HBI CARGO . it can be used as a powerful\ stand alone cleaner for HBI CARGO dust and deposition. Part No.- RXSOL-22-2216-210, Part No.- RXSOL-22-2216-025

Remarks / Precaution

MSDS

Product Name	RXSOL-22-2202-210
Product Type	CEMENT REMOVER RX HOLD

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Stock Point : Mumbai, Kandla, Kolkata, Chennai, Visakhapatnam, Fujairah, Muscat

Phone	+91 22 27815541 / 42
Fax	+91 22 2781 1318 :::AOH :0091 9821214367
Email	mail@rxmarine.com

Chemical Name	Concentration	CAS Number	EC Number	R Phrases*	Symbols
Proprietory Blend	20-40	........................	......................	34, 37	C
Corrosion Inhibitor	5-10	NA	NA	NA	-
Capryliminodipropionate	6-8
Hordaphos MDGB Phosphate ester, Clariant AG	5-9
Phosphoric Derivative	11-18

*See Section 16

Odour	Strong smell of hydrogen chloride.
Appearance	Liquid, pale yellow, soluble in water.
Contact with eyes	Can cause damage to the eyes.
Contact with skin	Prolonged skin or eye contact may cause chemical burns.
Inhalation	Causes severe irritation, May cause breathing difficulty.
Ingestion	Not regarded as a potential route of exposure.,Causes burning sensatio.

Contact with skin	Remove contaminated clothing immediately and drench affected skin with plenty of water. Seek medical advice if necessary Contaminated clothing should be laundered before use
Contact with eyes	If substance has got into eyes, immediately wash out with plenty of water for at least 15minutes.Irrigate eyes thorough lywhilst lifting eyelids Can cause damage to the eyes Obtain immediate medical attention
Ingestion	Do not induce vomiting Never give anything by mouth to anunconscious person.Give plenty of water to drink Obtain immediate medical attention
Inhalation	Remove patient to fresh air Seek medical attention if ill effects.occur
General	In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible)

-Non combustible
-Smoke from fires is corrosive, Hydrogen chloride may be formed
-Not flammable. In case of fire use extinguishing media appropriate to surrounding conditions
-Substance evolves toxic fumes, wear self-contained breathing apparatus
-Use water spray or fog to knock down and absorb corrosive fumes

Personal Precautions	Wear protective clothing as persection8.
Environmental Precautions	Do not allow to enter public sewers and water courses.
Clean Up Actions	Absorb spillage in inert material and shovel up Ventilate the area and wash spill site after material pick-up is complete.
Special Precautions	Wear protective clothing as persection 8.

Handling	Avoid contact with skin and eyes(S24/25) Do not breathe vapour/fumes(S23) Eye wash bottles should be available Wear protective clothing as per section8 Ensure adequate ventilation Inuse, may form flammable/explosive vapour-air mixtur(R18)
Storage	Keep only in the original container in a cool, well ventilated place(S3/9/49) Keep in acid store

Exposure Limits	TLV(TWA)1mg/m3(HCl).
Exposure controls	The undiluted product must not be used in a confined space with out good ventilation.
Occupational exposure controls	Wear suitable protective clothing, including eye/face protection and gloves(plastic or rubber are recommended) Respiratory protectionmay be required under exceptional circumstances when excessive air contamination exists Eye wash bottles should be available.

Odour	Pungent smell
Appearance	Liquid, pale yellow, soluble in water
PH	1.5at 100%concentration
Boiling point	~100°Cat 760mm/Hg
Vapour pressure	105.5at 20degC
Vapour density	(air=1)1.26
Freezing point	~-30°Cat 760mm/Hg
soluble in water	Completely soluble in water
Specific gravity	(water=1)1.16
Non combustible

This articleis considered stable under normal conditions, In use, may form flammable / explosive vapou r-airmixture(R18), Reaction products
may include hydrogen.Avoid over heating.In compatible with alkalis(strong bases).Contact with nitrite(e.g. Diesel guard NB, Cooling Water treatment)
liberates toxic gas.

Toxico logical information	Prolonged skin or eye contact may cause chemical burns.
Inhalation	Can cause damage to the respiratory system.
Contact with skin	Prolonged skin or eye contact may cause chemical burns.
Contact with eyes	Prolonged skin or eye contact may cause chemical burns.
Ingestion	Can cause damage to the digestive system.
Carcinogenicity	No evidence of carcinogenic effects.

Ecotoxicity	This product contains watersoluble and bio degradable composition.
Mobility	Emulsifies in water.
Persistence and Biodegradability	Most components in this product are not readily biodegradable.
Bioaccumulation Potential	Hydrocarbon solvents have the potential to bioaccumilate.
Other Adverse Effects	No environmental problems are expected when the product is used / handled correctly.In its intended use, the product will not be released into the environment.

Classification	This material and/or its container must be disposed of as disposal waste procedure.
Disposal considerations	Obtain the consent of pollution control authorites before discharging to waste water treatment plants(S54) Disposl should be in accordance with local, state or national legislation

Proper Shipping Name
UN
	Proper Shipping Name	Acidic solution
	UN NO.	1789
	Hazard Class	8	PackingGroup	II
Road/Rail(ADR/RID)
	Proper Shipping Name	Acidic solution
	ADR UN No.	1789
	ADRHazardClass	8	Tremcard	80GC1789-II
Sear (IMDG)
	Proper Shipping Name	Acidic Solution
	IMDG UN No.	1789
	IMDG Hazard Class	8	ICAO PackingGroup	II
	IMDG EmS	F-A, S-B	IMDG subrisk	N/A
	IMDG Labels	8	IMDG Flashpoint	N/A
Air(ICAO/IATA)
	ProperShippingName	Acidic solution
	IMDG UNNo	1789
	IMDG HazardClass	8	IMDG PackGroup	II
	ICAO subrisk	N/A	ICAO Labels	8+CAO
	ICAO Flashpoint	N/A
DOT/ CFR(USDepartment ofTransportation
	DOTProperShippingName	Acidic solution
	HazardousMaterial	Acidic Solution
	HazardClass	8	IdentificationNumber:	UN1789
	Product RQ (lbs)	N/E	DOTsubrisk	N/A
	DOTLabels	8	DOTFlashpoint	N/A

- Forbiddenonpassengeraircraft

Risk Phrases	Causes burns(R34) Irritating to respiratory system(R37)
Safety Phrases	In case of contact with eyes, rinse immediately with plenty of water and seek medical advice(S26). Wear suitable protective clothing, eye/face protection and gloves(S36/37/39) In case of accident or if you feel un well, seek medical advice immediately (show the label where possible)(S45)

Text of R and S phrase codes used in this safety data sheet:

R34

Causes burns;

R37

Irritating to respiratory system

The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituent The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's propertiesThe data given here only applies when product used for proper applicat-ion(s).The product is not sold as suitable.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Cement Remover RX Hold

Need a quote for this product?