Name: Carbon Remover Cleaner HD
Brand: Kolkata Chemical
Availability: InStock

CARBON REMOVER is a heavy duty solvent based cleaner used undiluted for stubborn carbon deposits, residual combustion products carbon, grease, oil, varnishes and other heavy deposits from diesel engine. Extremely high solvency and penetrating capabilities to remove carbonaceous residue formed by fuel and other petroleuium based product. RXSOL-16-1003-020 is a highly concentrated Wetting Emulsifying Agent.Specifically formulated for removal of completely carbon, grease, oil, varnishes and other heavy deposits from diesel engine
This powerful action is based on a two – Layer mechanism. The top-layer prevents the evaporation of the volatile components in the button-layer. The button –layer removes the deposited substances. This way, the deposits are bind and trapped resulting to complete and safe removal.

Application

For removal of carbon deposits it must be used concentrated ,contained in a steel immersion bath.

SAFETY AND HANDLING:- Completely Avoid contact with eyes as irritation may occur. Do not take internally. In case of contact with eyes, flush eyes immediately and cupiously with clean running water for 15- minutes and seek medical attention.

Dose

Depending upon the contamination deposition either concentrated or diluted.

Dilution : Use 1 part concentrate to 2-10 parts of water to yield a very effective end product. The components and machine parts are then dipped into the solvent / solution for 30 min. to 1 hr. Heavy deposition may need 12-24 hours , parts must be taken out from the bath and washed thoroughly with a high- pressure water supply jet system.

Conncentrated : RXSOL-16-1003-020 Carbon Remover Cleaner is most effective product in its category due to its quick and complete action. Concentrated Carbon Remover can be applied for cleaning of highly soiled components on blocks, gear boxes, pistons, rings, valves, atomizers, pipes, burners, coolers, cylinder heads, injectors, tubes, oil filters , old paint and lacquers ), Finally can be rinse with water or Wipe off.

Technical specifications

Highly concentrate carbon cleaning product manufacturer and supplier for Marine Shipping and heavy Industries. We are one of popular supplier of Carbon Remover in Visakhapatnam - vizag, Gnagavaram, Chennai, Mumbai, GOA, Manglore, Goa, Kandla, Mundra, Sikka, Kolkata, Haldia, Pirpav, Dubai, Sharjah, Fujairah.

Note

Non- evaporation prevents loss of chemical.

CHARACTERISTICS :-

Unique chemical formulation with corroision inhibitor
Non- toxic
Extends time between cleans.
Effective removal of STICKER/CARBON DEPOSITS , completely heavy carbon, grease oil, varnish and other deposits as well as old paints, resins and lacquer coatings
Can be applied by all normal methods.
Formulated to be very cost effective.
Does not contain chlorinated hydrocarbons.
Can be used on all metals & most painted surfaces.
100% Active.
Dries Completely.
Does not require special feeding equipment for safe application.
Reduce downtime and maintenance costs.

Remarks / Precaution

During maintenance Engine decarbonisation is one of important steps. Our Carbon remover fluid products not only saving engine decarbonising cost but also helps to clean all types of sludge deposits.

RXSOL carbon remover is best Solution for Internal Engine Cleaning and Maintenance also helps to clean clog oil passages, and the chemical will also effectively clean piston rings, filter, Disc etc.

The engine room is the heart of any vessel, responsible for the propulsion and essential power systems that keep the ship running smoothly. Proper engine room maintenance is critical to ensuring safety, efficiency, and regulatory compliance. At RXMARINE International, we specialize in providing high-quality marine chemicals that enhance maintenance procedures, keeping vessels in top condition.

Why Engine Room Maintenance Matters

Prevents Downtime & Costly Repairs: Regular inspections help detect early signs of wear and tear, reducing expensive breakdowns.
Enhances Fuel Efficiency: A well-maintained engine operates efficiently, cutting down fuel consumption and operational costs.
Ensures Crew Safety: Proper maintenance minimizes the risk of hazardous incidents such as fires, leaks, or mechanical failures.
Regulatory Compliance: Compliance with international maritime regulations (IMO, SOLAS) is essential to avoid fines and ensure smooth sailing.

Key Aspects of Engine Room Maintenance

1. Cleaning & Degreasing

The accumulation of oil, grease, and dirt can lead to overheating and reduced efficiency. Using RXMARINE’s Engine Room Cleaners & Degreasers, you can effectively remove sludge, carbon deposits, and oil residues.

2. Lubrication System Maintenance

Regular oil changes using high-quality marine lubricants help prevent friction and wear.
Monitoring oil viscosity and contamination is crucial to detect potential engine issues early.

3. Cooling System Efficiency

Scale and corrosion in heat exchangers and cooling lines reduce efficiency. Descaling chemicals like RXMARINE’s RXSCALE help prevent blockages and maintain optimal cooling.
Ensure coolant levels are checked regularly to prevent overheating.

4. Fuel System Treatment

Fuel contamination with water, sludge, and microbial growth can affect engine performance. Using fuel additives and biocides prevents clogging and improves combustion efficiency.
Regularly clean fuel injectors and filters to maintain smooth operation.

5. Bilge Cleaning & Oil Spill Management

The bilge area accumulates oil and sludge, which can pose environmental and safety hazards.
RXMARINE’s Oil Spill Dispersants & Bilge Cleaners effectively break down oil and prevent pollution.

6. Corrosion Prevention

Saltwater exposure accelerates corrosion in pipes, tanks, and metal surfaces.
Apply corrosion inhibitors and protective coatings to extend the life of engine room components.

Best Practices for Engine Room Maintenance

Implement a Routine Inspection Schedule – Daily, weekly, and monthly checks help identify problems early.
Train Crew Members – Ensure engineers and crew are well-trained in maintenance procedures.
Use High-Quality Marine Chemicals – Investing in premium cleaning, degreasing, and protective products ensures longevity and efficiency.
Document Maintenance Activities – Keeping detailed logs helps in audits, repairs, and regulatory compliance.

MSDS

Product Name	RXSOL-16-1003-020
Product Type	CARBON REMOVER-II

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Phone	+91 22 65113333 / 5555 / 9999 / 27611360
Fax	+91 22 2781 1318 :::AOH :0091 9821214367
Email	mail@rxmarine.com

Chemica Name	Concentration	CAS Number	EC Number	R Phrases*	Symbols
1,2-Dichlorobenzene	30-60	95-50-1	202-425-9	22, 36/37/38, 50/53	Xn, N
Emulsified Xylenol	10-30	1300-71-6	215-089-3	24/25, 34, 51/53	T, N
Emulsifiable Liq of Aliphatic & Aromatic, unspecified	10-30	64742-94-5	265-198-5	65, 66, 51, 53	Xn, N
Naphtha(petroleum)hydrosulfurizedheavy	10-30	64742-82-1	265-185-4	65, 66	Xn

*See Section 16

toxic corrosive

Toxic Corrosive

Odour	Unpleasant odour, Strong smell of phenol.
Appearance	Liquid, brown, dispersible in water.
Contact with eyes	Can cause damage to the eyes.
Contact with skin	Causes burns (R34), Toxic in contact with skin and if swallowed (R24/25).
Inhalation	May cause severe irritation, May cause dizziness, confusion, headache or stupor, In cases of severe exposure, anaesthesia may develop.
Ingestion	Toxic if swallowed (R25).
	Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment (R50/53.

Dangerous for the Environment	Remove contaminated clothing immediately and drench affected skin with plenty of water. Then wash with soap and water When in doubt or symptoms persist, seek medical attention.Contaminated clothing should be laundered before reuse.
Contact with eyes	If substance has got into eyes, immediately wash out with plenty of water for at least 15 minutes Irrigate eyes thoroughly whilst lifting eyelids.Seek immediate medical attention Continue flushing with water until medical help arrives.
Ingestion	Never make an unconscious person vomit or drink fluids Give plenty of water to drink Do not induce vomiting Seek immediate medical attention.
Inhalation	Remove patient to fresh air.Keep warm and at rest, in a half upright position. Loosen clothing When in doubt or symptoms persist, seek medical attention.
General	In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) (S45).

-   Flash point >70 deg C (CC)
-   Decomposition products may include phosgene, Decomposition products may include carbon oxides
-   In case of fire use water spray or fog, alcohol resistant foam, dry chemical or carbon dioxide (S43)
-   Substance evolves toxic fumes, wear self-contained breathing apparatus
-   Prevent run off water from entering drains if possible
-   Use water spray or fog to knock down and absorb corrosive fumes
-   Vapours are heavier than air and may travel considerable distances to a source of ignition and flashback

Personal Precautions	Wear protective clothing as per section 8. Vapours are heavier than air and may travel considerable distances to a source of ignition and flashback.
Environmental Precautions	Do not allow to enter public sewers and water courses.
Immediate Actions	Use appropriate containment to avoid environmental contamination (S57).
Clean Up Actions	Absorb spillage in inert material and shovel up. Ventilate the area and wash spill site after material pick-up is complete .
Special Precautions	Wear protective clothing as per section 8 Avoid release to the environment. Refer to special instructions/Safety data sheets (S61) Vapours are heavier than air and may travel considerable distances to a source of ignition and flashback.

Handling	See Section 8 Eye wash bottles should be available Avoid contact with skin and eyes (S24/25)
Storage	Keep only in the original container in a cool, well ventilated place (S3/9/49)

Exposure Limits	TLV (TWA) 20 ppm, 122 mg/m3 (1,2-Dichlorobenzene)
Exposure controls	The undiluted product must not be used in a confined space without good ventilation
Occupational exposure controls	Wear approved respirator if exposure likely to exceed MEL/OES Wear goggles giving complete eye protection Wear suitable protective clothing, including eye/face protection and gloves (neoprene or nitrile are recommended)

respirator gloves goggles

Respirator Gloves Goggles No_Smoking

Odour	Unpleasant odour, Strong smell of phenol
Appearance	Liquid, brown, dispersible in water
pH	10-11 (5% in 50/50 H2O-IPA mix)
Boiling point	> 100 °C at 760 mm /Hg
Vapour pressure	not known
Vapour density	(air = 1) >01
Freezing point	0 °C at 760 mm/Hg
Insoluble in water
Specific gravity	(water=1) 1.02
Flash point	>70 deg C (CC)

-   This article is considered stable under normal conditions, May cause rubber to swell
-   Avoid overheating
-   Incompatible with strong oxidizing substances, Contact with alkaline earth metals may form explosive
    gases, Contact with alkali metals may form explosive gases
-   See Section 5

Toxicological information	No experimental data available Inhalation.Vapours or aerosols may cause irritation of eyes, nose and respiratory tract.
Contact with skin	In cases of severe exposure, redness and irritation may develop.
Contact with eyes	Causes irritation.
Ingestion	May cause gastro-intestinal disturbances.
Carcinogenicity	No evidence of carcinogenic effects.

Ecotoxicity	This product does not contain ingredients which are classified in the EU as dangerous for the environment.
Mobility	Completely soluble in water.
Persistence and Biodegradability	Its main ingredients will either dissolve rapidly and dissociate in water or are readily/inherently biodegradable.
Bioaccumulation Potential	Bioaccumulation of the components in this product is insignificant. Other Adverse Effects. No environmental problems are expected when the product is used / handled correctly.

Classification

This material and/or its container must be disposed of as hazardous waste EU Waste class Disposal considerations Do not discharge into drains or the environment, dispose to an authorised waste collection point Disposal should be in accordance with local, state or national legislation

Proper Shipping Name:
UN
	Proper Shipping Name:	Toxicliquid organic, n.o.s	(Xylenol, 1,2-dichlorobenzene)
	UN NO.	2810
	Hazard Class	6.1	PackingGroup	III
Road/Rail(ADR/RID)
	Proper Shipping Name	Toxicliquid, organic, n.o.s.	(Xylenol, 1,2-dichlorobenzene)
	ADR UN No.	2810
	ADRHazardClass	6.1	Tremcard	61GT1-III
Sear (IMDG)
	Proper Shipping Name	Toxicliquid, organic, n.o.s.	(Xylenol, 1,2-dichlorobenzene)
	IMDG UN No.	2810
	IMDG Hazard Class	6.1	ICAO PackingGroup	III
	IMDG EmS	F-A, S-A	IMDG subrisk:	N/A
	IMDG Labels	6.1+Mar	Pollutant
	IMDG Flashpoint	>70°C
Air(ICAO/IATA)
	ProperShippingName	Toxicliquid, organic, n.o.s.	(Xylenol, 1,2-dichlorobenzene)
	ICAO UnNo	2810
	ICAO HazardClass	6.1	ICAO PackingGroup	III
	ICAO subrisk	N/A	ICAO Labels	6.1
	ICAO Flashpoint	>70°C
DOT/ CFR(USDepartment ofTransportation
	DOTProperShippingName	Toxicliquid, organic, n.o.s.	(Xylenol, 1,2-dichlorobenzene)
	HazardousMaterial	Xylenol,	1,2-dichlorobenzene
	HazardClass	6.1	IdentificationNumber	UN2810
	Product RQ (lbs)	100	DOTsubrisk:	MarinePollutant
	DOTLabels	6.1+Mar	Pollutant
	DOTFlashpoint	>70°C

Risk Phrases	Irritating to eyes (R36)
Safety Phrases Irritant	In case of contact with eyes, rinse immediately with plenty of water and seek medical advice (S26) Wear suitable gloves and eye/face protection (S37/39)

Text of R and S phrase codes used in this safety data sheet:- R34: Causes burns; R36: Irritating to eyes; R37: Irritating to respiratory system; R41: Risk of serious damage to eyes. The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications - usage in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from manufacturer This Safety Data Sheet is provided in compliance with The Dangerous Substances Directive (67/548/EEC) This Safety Data Sheet is provided in compliance with The Dangerous Preparations Directive (88/379/EEC) This Safety Data Sheet is provided in compliance with The Safety Data Sheets Directive (2001/58EC) Composition information in accordance with Regulation (EC) No 648/2004 of the European Parliament and of the Council of 31 March 2004 on detergents: Nonionic surfactants 5-15 % Amphoteric surfactants 5 %

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Carbon Remover Cleaner HD