Car Shampoo manufacturer, supplier and exporter. We also providing private labeling option to our dealer to maintain there brand and privacy. CAR SHAMPPO not only clean surface with extra foam generation but also leave ion effect to repel dust particle from CAR painted surface.
A new and exciting silicon base product treated for the really tough cleaning problem faced on the proper maintenance of AUTOMOBILES. our shampoo globules keep apart by mutual repulsion and are said to have been emulsified grease globules bearing dirt can be really washed wit water SILICON base cleaner repels dust and soil from returning. for people who take SHINE to QUALITY
CAR CLEANING and maintain the original shining on CAR, is always be demand of car lover. This is only possible to avoid any mechanical action like rubbing, wiping etc... Our CAR shampoo is different from others, as it is free from any solid and salt formation cleaner, which results white stain on dryness.
Use as in Initial Vehicle shampoo in all types of tunnel and in bay automatics, rollovers and self serve brush applications. Highly effective for quick penetration of greasy road film.
Uses of CAR shampoo is very simple and easy. We are manufacturing CAR shampoo since 1995, this long time practices helps to obtain some cleaning tips as follows :::-
First off all spot the area where more cleaning required. And apply neat CAR SHAMPOO which will helps to clean oily greasy surface without any touch or mechanical rubbing action.
Then dilute the car shampoo with salt free water ( Always select soft water in place of Hard water ). And spray on entire surface area to clean. And proceed with succesive water jet / pump to get your shining car.
For GENERAL WASH :
Rinse surface with water. Pour 30ml or 4 capfuls of product into a wash bucket and add one gallon of water. For best results, ensure car is cool to the touch and in the shade. Apply wash and water mixture to the car surface with a clean sponge or wash mitt, such as Meguiar’s Microfiber Wash Mitt. Rinse car thoroughly from the top of the vehicle downwards to promote sheeting action. For best results, immediately wipe off remaining water with cotton or Drying Towel.
|
Appearance/Odour |
: Liquid Green / Yellow, Pleasant odour |
|
pH |
: 8.5 |
|
Boiling point/boiling range |
: 100 ºC |
|
Melting point |
: Not applicable. |
|
Flammability (solid, gas) |
: Not classified |
|
Explosive properties |
: Not classified |
|
Oxidising properties |
: Not classified |
|
Flash point |
: Not applicable. |
|
Relative density |
: 1 |
|
Water solubility |
: Complete |
|
Evaporation rate |
: No data available |

| Product Name |
RXSOL-41-4102-004 |
| Product Type | Car Wash Shampoo |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 27815540 / 41 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |

|
Chemical Name |
Cas Number |
Wt % |
| Cocamide DEA | 68603-42-9 | 20 |
| Sodium Meta Silicate | 10213-79-3 | 2 |

|
Acute Effects |
||
|
|
Eye |
Eye irritant, expect redness, stinging, watering and itching. Possible damage to eye tissue. |
|
|
Skin |
No significant irritation expected from a single short-term exposure. |
|
|
Inhalation |
Irritates respiratory passages very slightly. |
|
|
Oral |
Low ingestion hazard in normal use. |
|
Prolonged/Repeated Exposure Effects |
||
|
Skin |
No known applicable information. |
|
|
Inhalation |
No known applicable information. |
|
|
Oral |
No known applicable information. |
|
Medical Conditions Aggravated by Exposure : No known applicable information. The above listed potential effects of overexposure are based on actual data, results of studies performed upon similar compositions, component data and/or expert review of the product. Please refer to Section 11 for the detailed toxicology information.

| Eye | Immediately flush with water. Consult Doctor. |
| Skin | Rinse thoughly if irritation occurs. Consult Doctor if it persists |
| Inhalation | No first aid should be needed. |
| Oral | Seek medical attention |
| Comments | Treat symptomatically. |

| Flash Point | Non Flammable |
| Auto Ignition | Not Determined |
| Upper Flamability | Limit Not Determined |
| Lower Flamability | Limit Not Determined |
| Extinguishing Media | On large fires use dry chemical, foam or water spray. On small fires use carbon dioxide (CO2), dry chemical or water spray. Water can be used to cool fire exposed containers. |
| Fire Fighting Measures | Self-contained breathing apparatus and protective clothing should be worn in fighting large fires involving chemicals. Determine the need to evacuate or isolate the area according to your local emergency plan. Use water spray to keep fire exposed containers cool. |
| Unusual Fire Hazards | None. |
| Hazardous Decomposition Products | Thermal breakdown of this product during fire or very high heat conditions may evolve the following hazardous decomposition products: Carbon oxides and traces of incompletely burned carbon compounds. Formaldehyde. Metal oxides. |

Determine whether to evacuate or isolate the area according to your local emergency plan. Observe all personal protection equipment recommendations described in Sections 5 and 8. For large spills, provide diking or other appropriate containment to keep material from spreading. If diked material can be pumped, store recovered material in appropriate container. Clean up remaining materials from spill with suitable absorbant. Clean area as appropriate since spilled materials, even in small quantities, may present a slip hazard. Final cleaning may require use of steam, solvents or detergents. Dispose of saturated absorbant or cleaning materials appropriately, since spontaneous heating may occur. Local, state and federal laws and regulations may apply to releases and disposal of this material, as well as those materials and items employed in the cleanup of releases. You will need to determine which federal, state and local laws and regulations are applicable. Sections 13 and 15 of this MSDS provide information regarding certain federal and state requirements.

- Avoid eye contact.
- Use reasonable care.

| Engineering Controls: | ||
| Local Ventilation | None should be needed. | |
| General Ventilation | Recommended. | |
| Personal Protective Equipment for Routine Handling: | ||
| Eyes | Use proper protection - safety glasses as a minimum. | |
| Skin | Washing at mealtime and end of shift is adequate. | |
| Suitable Gloves | No special protection needed. | |
| Inhalation | No respiratory protection should be needed. | |
| Suitable Respirator | None should be needed. | |
| Precautionary Measures | Avoid eye contact. Use reasonable care. | |
| Comments | ||
| When heated to temperatures above 150 degrees C in the presence of air, product can form formaldehyde vapors. Formaldehyde is a potential cancer hazard, a known skin and respiratory sensitizer, and an irritant to the eyes, nose, throat, skin, and digestive system. Safe handling conditions may be maintained by keeping vapor OSHA Permissible Exposure Limit for formaldehyde. | ||

| Physical State | Liquid |
| Color | Blue / Red |
| Odor | Bubblegum |
| pH | 8-9 |
| Specific Gravity | 99 |
| Viscosity | 200 cst |
| Vapor Density (Air=1) | Not Determined |
| Melting Point | °F 25°F |
| Vapor Press | Not Determined |
| Water Solubility | complete |
| VOC Content | .05 lb/gal |

| Stability | Stable |
| Hazardous Polymerization | Not Expected to Occur |
| Conditions to Avoid | Oxidizing materials can cause a reaction |
| Hazardous Decomposition Products: | |
| When heated to temperatures above 150 degrees C in the presence of air, product can form formaldehyde vapors. Safe handling conditions may be maintained by keeping vapor OSHA Permissible Exposure Limit for formaldehyde. | |

Routes of Entry: Dermal Contact, Eye Contact, Ingestion
Acute oral toxicity 438 mg/Kg (LD 50, Rat)

Biodegradable Product

When a decision is made to discard this material, as received, is it classified as a non hazardous waste.
State or local laws may impose additional regulatory requirements regarding disposal.

Not subject to DOT. Not regulated
Not subject to IMDG code.
Not subject to IATA regulations

| TSCA Status | All chemical substances in this material are included on or exempted from listing on the TSCA Inventory of Chemical Substances. |
| EPA SARA Title III Chemical Listings | |
| Section 302 Extremely Hazardous Substances (40 CFR 355) : None. | |
| Section 304 CERCLA Hazardous Substances (40 CFR 302): None. | |
| Section 311/312 Hazard Class (40 CFR 370): | |
| Acute | No |
| Chronic | No |
| Fire | No |
| Pressure | No |
| Reactive | No |
| Section 313 Toxic Chemicals (40 CFR 372): None present or none present in regulated quantities. Supplemental State Compliance Information California | |
| Warning | This product contains surfaxctan chemical under the Safe. But avoid Drinking Water and Food grade product. |

The information and recommendations are offered for the user's consideration and examination, and it is the user's responsibility to satisfy itself that they are suitable and complete for its particular use. If buyer repackages this product, legal counsel should be consulted to insure proper health, safety and other necessary information is included on the container.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.