Boiler Hydrocarbon Oil Sludge Remover – Effective Boiler & Heating System Cleaner
Boiler Hydrocarbon Oil Sludge Remover is a specialized industrial cleaning chemical designed to remove hydrocarbon oil, sludge, grease, carbonaceous deposits, and oily contaminants from boiler systems, heating equipment, hot-water systems, and associated pipelines.
Oil contamination inside boilers can reduce heat-transfer efficiency, increase fuel consumption, restrict water circulation, and contribute to operational problems. A suitable hydrocarbon sludge remover helps dissolve and disperse these deposits, supporting efficient boiler operation and routine maintenance.
BOILER SLUDGE CONDITIONER is a product to be used in situations where the boiler water is contaminated with oil. This high performance product is applicable to both medium and low-pressure steam boilers in order to prevent sludge deposits.
What is Boiler Hydrocarbon Oil Sludge Remover?
Boiler Hydrocarbon Oil Sludge Remover is a formulated cleaning agent designed to break down and disperse oil-based sludge and hydrocarbon deposits that accumulate on internal surfaces of boilers and heating systems.
It can be used as part of planned boiler cleaning and maintenance programs where oil contamination has entered the boiler water or accumulated in low-flow areas, mud drums, pipelines, heat exchangers, and related equipment.
Depending on the formulation, the cleaner may contain solvents, surfactants, emulsifiers, dispersants, alkaline builders, or other specialty ingredients selected to improve the removal of hydrocarbon contamination.
A. Dosing Procedure Regularly, a volume of 100 ml of the BOILER SLUDGE CONDITIONER should be applied for every ton of water capacity, where oil contamination exists. How ever, in systems where severe oil contamination exists, off-line cleaning is required before the product can be applied. There after, the application should be repeated daily, for a period of two weeks, until oil removal is complete.
B. Feeding Procedure Feed directly to the boiler by using a bypass pot feeder or a suitable chemical injection pump. For low-pressure boilers the solution may be applied to the hot well or the condensate return tank.
Note that BOILER SLUDGE CONDITIONER can be applied as it is or dissolved with other boiler treatment products.
SAFETY AND HANDLING HANDLING Handle with care. Store in a dry, cool and well ventilated environment.
PHYSICAL PROPERTIES BOILER SLUDGE CONDITIONER is a white high molecular weight solution. It is hydrophilic and of low causticity.
Appearance / Color : CLEAR liquid
pH : 8 Odor : Odorless
CHARACTERISTICS, ADVANTAGES & APPLICATIONS -
Drives to the coagulation of the oil droplets and their removal by blow-down. -
May be combined with other boiler water treatment products. -
Efficiently prevents the deposition of sludge. -
Easy to apply and use.
Applications of Boiler Hydrocarbon Oil Sludge Remover
1. Boiler Cleaning
The product can be used for cleaning boilers contaminated with hydrocarbon oil and oily sludge. Proper cleaning can help restore heat-transfer surfaces and improve boiler-water circulation.
2. Oil-Fouled Heat Exchangers
Oil and hydrocarbon deposits can reduce heat-transfer efficiency. Specialized cleaning formulations can help remove oily contamination from suitable heat-exchanger surfaces.
3. Steam Boiler Systems
Industrial steam boilers may require periodic cleaning when oil contamination affects boiler-water quality or internal surfaces.
4. Hot Water Boilers
Hydrocarbon sludge removers can also be used in selected hot-water heating systems where oil contamination has accumulated.
5. Boiler Pipelines and Circulation Systems
Oily deposits can accumulate in circulation lines, low-flow areas, valves, and associated equipment. A suitable chemical cleaning program can help loosen and disperse these contaminants.
6. Marine Boilers
In marine applications, boiler systems can experience contamination from fuel oil, lubricants, and other hydrocarbons. Boiler hydrocarbon sludge remover can be used as part of a planned marine boiler cleaning and maintenance program, subject to equipment and material compatibility.
Sludge Conditoner for Boiler Water manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Sludge Conditoner for Boiler Water at a competitive price from us. We have ready stock of Sludge Conditoner for Boiler Water in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
| Product Name | Boiler Hydrocarbon Oil Sludge Remover RXSOL-40-5026-025 |
| Product Type | SLUDGE Conditioner |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Email : Mumbai, Kandla, Surat, Vizag, Chennai, Kolkata, Fujairah, Muscat
| Phone | 0091 22 65113333 |
| Fax | 0091 22 2781 1318 0091 9821214367 |
| 123@rxmarine.com |
|
Chemical Name |
Concentration |
CAS Number |
EC Number |
R Phrases* |
Symbols |
|
Destillate(petroleum),hydrotreated, light |
5 - 12 |
64742-47-8 |
265-149-8 |
65, 66 |
Xn |
|
Fattyalcoholethoxylate |
10-30 |
34398-01-1 |
500-084-3 |
41 |
Xi |
|
Fatty Alcohol Polyethoxylated Polymer |
5-10 |
formulatory |
Formulatory |
36 |
Xi |
|
Ethoxylate |
1-5 |
26468-86-0 |
polymer |
41 |
Xi |
|
Odour |
Solvent odour. |
|
Appearance |
Liquid, pale yellow, soluble in water. |
|
Contact with eyes |
Risk of serious damage to eyes (R41). |
|
Contact with skin |
Causes irritation, Prolonged skin contact will result in defatting of the skin, leading to irritation, and in some cases, dermatitis . |
|
Inhalation |
Vapours or aerosols may cause irritation of eyes, nose and respiratory tract, In cases of severe exposure, shortness of breath may develop. |
|
Ingestion |
Harmful: may cause lung damage if swallowed (R65). |
|
Contact with skin |
Remove contaminated clothing immediately and drench affected skin with plenty of water. Then wash with soap and water.Seek medical attention if irritation persists |
|
Contact with eyes |
If substance has got into eyes, immediately wash out with plenty of water for at least 15 minutes Irrigate eyes thoroughly whilst lifting eyelids When in doubt or symptoms persist, seek medical attention |
|
Ingestion |
Do not induce vomiting Never give anything by mouth to an unconscious person Give water or milk to drink |
|
Inhalation |
Keep warm and at rest, in a half upright position. Loosen clothing |
|
General |
When in doubt or symptoms persist, seek medical attention.Use good personal hygiene practices |
- Non-flammable
- May give off noxious and toxic fumes in a fire
- Not flammable. In case of fire use extinguishing media appropriate to surrounding conditions
|
Personal Precautions |
Wear protective clothing as per section 8. |
|
Environmental Precautions |
Do not flush spilt material into any public water system. |
|
Immediate Actions |
Use appropriate containment to avoid environmental contamination (S57). |
|
Clean Up Actions |
Absorb spillage in inert material and shovel up Ventilate the area and wash spill site after material pick-up is complete. |
|
Special Precautions |
Wear protective clothing as per section 8. |
|
Handling |
Use good personal hygiene practices Avoid contact with skin and eyes (S24/25) Eyewash bottles should be available |
|
Storage |
Keep only in the original container in a cool, well ventilated place (S3/9/49) |
|
Exposure Limits |
No exposure limits have been set for this substance. |
|
Exposure controls |
No special ventilation is required unless the product is used in a spray form. |
|
Occupational exposure controls |
Wear goggles giving complete eye protection Wear plastic or rubber gloves Wear apron No respiratory protection is required unless subject to contact with substance mist |
Goggles Gloves Suit Respirator
|
Odour |
Solvent odour |
|
Appearance |
Liquid, pale yellow, soluble in water |
|
pH |
9.3 - 10.3 at 100 % concentration |
|
Boiling point |
100 °C at 760 mm /Hg |
|
Vapour pressure |
not known |
|
Vapour density |
not applicable |
|
Freezing point |
0 °C at 760 mm/Hg |
|
Completely soluble in water |
|
|
Specific gravity (water=1) |
0.93 |
|
Non-flammable |
|
- Thisarticleisconsideredstableundernormal conditions
- Avoidoverheating, Keepawayfromfrost
- Decompositionproductsmayincludecarbonoxides
| Toxicological information | No experimental data available |
| Inhalation | By comparison with analogous substances, it is concluded that it may be harmful |
| Contact with skin | May cause redness and irritation |
| Contact with eyes | May cause severe irritation |
| Ingestion | The ingestion of significant quantities may cause damage to lungs |
| Carcinogenicity | No evidence of carcinogenic effects |
|
Toxicological information |
No experimental data available |
|
Inhalation |
By comparison with analogous substances, it is concluded that it may be harmful |
|
Contact with skin |
May cause redness and irritation |
|
Contact with eyes |
May cause severe irritation |
|
Ingestion |
The ingestion of significant quantities may cause damage to lungs |
|
Carcinogenicity |
No evidence of carcinogenic effects |
|
Classification |
|
|
Disposal considerations |
Discharge according local state and fedral regulation. |
- Not classified as hazardous for transport
|
Risk Phrases |
Repeated exposure may cause skin dryness or cracking (R66) Risk of serious damage to eyes (R41) |
|
Safety Phrases |
Do not breathe spray/mists (S23) In case of contact with eyes, rinse immediately with plenty of water and seek medical advice (S26) If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label (S62) Wear suitable protective clothing, eye/face protection and gloves (S36/37/39) |
Text of R and S p hrase codes used in this safety data sheet:- R36: Irritating to eyes;R41:Risk of serious damage to eyes;R65:Harmful:may cause lung damage if swallowed; R66: Repeated exposure may cause skin dryness or cracking . The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications - usage in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from manufacturer .
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.