Very effective cleaner for sticky PU, Gasious,Oily and Greasy mess, Fully active cleaner specially formulated for the removal of tuff oily stains residues, with out the need for Scrubbing or Brushing which can cause mechanical damages to surface and result in poor performance. Field test have shown that this is very gentle with personnel and on metallic colour surface. Should always be used at full strength to obtain maximum benefits.
Same Family PRODUCT ::: www.rxmarine.com/STICKNSOL ( STICK N SOL , RXSOL-15-1017-025 )
This heavy duty cleaner is a biodegradable degreaser (oil dispersant). It disperse and remove all types of oil, grease, wax, and stains, leaving the treated surface cleansed and back to original condition without any short or long term effects. And This cleaner is powerfull substitute of IPA, Methyl Ethyl Ketone , acetone, and other hazardous alcohol and solvents. This product have low evaporation rate and high solvency formula can significantly reduce overall solvent usage. It contains no water and it is 100% reactive proprietory blend.
- Unique chemical formulation for cleaning of graffiti from smooth and rough surfaces
- Non- toxic.
- Extends time between cleans.
- Safe to handle.
- Effective removal of Heavy DEPOSITS.
- Can be applied by all normal methods.
- Formulated to be very cost effective.
- Does not contain chlorinated hydrocarbons.
- Can be used on all metals & most painted surfaces.
- Environmentally friendly.
- Non-Corrosive.
- 100% Active.
- Dries Completely.
- Does not require special feeding equipment for safe application.
- Cleans and flushes painting instrument like spray guns, paint lines, mixing tanks, and general purpose paint jobs
- Removes and cleans wax for surface preparation for paint, glue, and assembly applications
- very effective to remove sticky mess of LABEL ( After peeling off the Label ) Also very usefull for removal of vinyl graphics from boats, signs, trucks, and glass
- Cleans and degreases a variety of parts, tools, and equipment
- Removes soot, grease, oil, grime, and diesel fuel
- Handles tough automotive and transportation cleaning jobs
- Cleans toner, copier equipment, and machinery including printing presses
- Clean heavy duty oily and tar deposits
- Flushes and cleans polyesters, vinyl ester, and epoxy lines
- Removes polyurethanes, varnishes, enamels, and UV curable coatings
- Cleans and prepares material surfaces such as metals
Cleans, degreases and disperse heavy grease and oil build up on surfaces and hard to reach areas. Great for engines overhauling, heavy machinery, industrial equipment maintenance and mechanical parts cleaning.
Depends on usage this product is designed into two types :::
- RXSOL-20-2019-025 Concentrate Heavy duty industrial cleaning job - not suitable for painted or coated surfaces.
- RXSOL-20-2019-025 Tech Medium duty industrial cleaning job - suitable for all surfaces.
Suitable for fast and effective cleaning jobs on huge areas with very minimal scrubbing activity and instant residue removal.
Widely applicable at airports and hangars for its non-volatile, non-corrosive and bio-degradable.
Easy and safe to use for electrical and electronic small sensitive components with hard to reach area. Solutions are non-hazardous and non-abrasive
Machine maintenance and overhauling, tools restoration.
Product Properties:-
|
Product Name |
Bio Sol Cleaner (Wetting Emulsifying Agent ) |
|
|
Active Matter |
100% |
|
|
Consistency |
Liquid |
|
|
Emulsifying Property |
Good for emulsification of Oils , Gum , Wax, Greases , Polymer & Solvents , |
|
|
Wetting Property |
Good Wetting & Emulsifying Property |
|
|
Ionic Nature |
Non-Ionic |
|
|
Colour |
Pale Yellow |
|
|
Appearance |
Clear liquid |
|
|
Odour |
Pine based |
|
|
PACKAGING |
Order No |
Size (in litres) |
|
|
RXSOL-20-2019-025 |
5,25 , 50, 210 |
| Product Name | RXSOL-10-2019-005 |
| Product Type | Bio Sol Green Cleaner , All Purpose Cleaner |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 / 27815540 |
| Fax | +91 22 2781 1318 |
| mail@rxmarine.com | |
| Website | www.rxmarine.com |
|
Chemical Name |
CAS Number |
Percent Range |
Index number |
| Ethoxylated Alcohol | 68439‐46‐3 | 5% | |
| Tetrapotassium Pyrophosphate | 7320‐34‐5 | 5% | |
|
Butoxyethanol |
111-76-2 2 |
5% |
603-014-00-0 |
| Sodium Citrate | 68‐04‐2 | 5% | |
| Ethyl Lactate | 97-64-3 | 7% | |
| Proprietory Blend | ------------- | 80% |
EYE Contact ::: Gives Irritation
Skin Contact::: Under typical condition No adverse effects, Dryness can caused on prolonged exposure.
Ingestion ::: May cause stomach or intestinal irritation if swallowed.
R 20/21/22 Harmful by inhalation, in contact with skin and if swallowed.
R 36/38 Irritating to eyes and skin.
| General information | Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident. |
|
After inhalation |
Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist.In case of unconsciousness place patient stably in side position for transportation. |
|
After skin contact |
Immediately wash with water and soap and rinse thoroughly. |
|
After eye contact |
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor. |
|
After swallowing |
Call for a doctor immediately. |
Suitable extinguishing agents:
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Protective equipment: Mouth respiratory protective device.
Person-related safety precautions: Not required.
Measures for environmental protection: Dilute with plenty of water. Do not allow to enter sewers/ surface or ground water.
Measures for cleaning/collecting: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Dispose contaminated material as waste according to item 13. Ensure adequate ventilation.
Handling:
Information for safe handling: Ensure good ventilation/exhaustion at the workplace.
Information about fire - and explosion protection: No special measures required.
Storage:
Requirements to be met by storerooms and receptacles: No special requirements.
Information about storage in one common storage facility: Not required.
Further information about storage conditions: Keep container tightly sealed.
Additional information about design of technical facilities: No further data; see item 7.
| Ingredients with limit values that require monitoring at the workplace: | |
| 111-76-2 2-butoxyethanol | |
|
PEL (USA)
REL (USA)
TLV (USA) |
240 mg/m³, 50 ppm Skin 24 mg/m³, 5 ppm Skin 97 mg/m³, 20 ppm Short-term value: 246 mg/m³, 50 ppm Long-term value: 98 mg/m³, 20 ppm Skin Short-term value: 50 ppm Long-term value: 25 ppm |
Additional information: The lists valid during the making were used as basis.
Personal protective equipment:
General protective and hygienic measures: Keep away from foodstuffs, beverages and feed. Immediately remove all soiled and contaminated clothing Wash hands before breaks and at the end of work. Avoid contact with the eyes and skin.
Respiratory protection: In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
Protection of hands:Protective gloves The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.
Penetration time of glove material: The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Eye protection: Tightly sealed goggles
|
General Information |
|
|
Phase |
Oily Liq Phase |
|
Colour |
Colourless |
|
Odour |
Characteristic |
|
Change in condition |
|
|
Melting point/Melting range |
Not Applicable |
|
Flash point |
65°C |
| Ignition temperature | 240°C |
| Density at 20°C | 0.9 g/cm³ |
| Solubility in / Miscibility with water at 20°C | 70% |
Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Dangerous reactions No dangerous reactions known.
Dangerous decomposition products: No dangerous decomposition products known.
| Acute toxicity: | |||||
| LD/LC50 values relevant for classification: | |||||
|
Oral Dermal |
LD50 LC50 |
1480 mg/kg (rat) 400 mg/kg (rab) |
|||
| Primary irritant effect: | |||||
| on the skin | Irritant to skin and mucous membranes. | ||||
| on the eye | Irritating effect. | ||||
| Sensitization | No sensitizing effects known. | ||||
100 % Biodegradable, No adverse effects known or suspected. Not listed toxic
Take up with sand or other non-combustible absorbent material and place into container for later disposal. Flush area with water. Dispose in accordance with all applicable Federal, State, and local environmental regulations. Spent product may be offered for fuel blending incineration. Recommendation Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Uncleaned packaging:
Recommendation: Disposal must be made according to official regulations.
Recommended cleansing agents: Water, if necessary together with cleansing agents.
IATA - Non Regulated, Hazardous Substances : Non, Dot Clasification : Combustible Liquid ,
Labelling according to EU guidelines:
The product has been classified and marked in accordance with EU Directives / Ordinance on Hazardous Materials.
• Risk phrases: 20/21/22 Harmful by inhalation, in contact with skin and if swallowed. 36/38 Irritating to eyes and skin.
• Safety phrases: 2 Keep out of the reach of children. 36/37 Wear suitable protective clothing and gloves. 46 If swallowed, seek medical advice immediately and show this container or label.
This information is based on our present knowledge.However, this shall not constitute a guarantee for anys pecific product features and shall not establish a legally valid contractual relationship.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.