Highly concentrated solvent free and water based degreaser cleaner and degreaser with powerful detergents and surfactants. Water softening agents allow it to work well in hard or soft water. Contains wetting agents to permit deep, penetrating, cleaning action. This is a medium sudsing product that is safe on aluminum and leaves no soap film.
Highly concentrated quick break, . Effective at low concentrations
THIS is Emulsifier based Mixture of , new technology surfactants (With high solvency and emulsification effect),Corrosion inhibitors, Rust preventive. due to free from caustic and Hydrocarbon very gentle on hands & ideal for cleaning Walls Wood works, Metals and all areas . Acts as superior quality cleaner / degreaser.BIO DEGRADABLE
Also containing corrosion inhibitors to prevents the corrosion of metals such as Aluminium, Copper,Brass and Tin. This is designed and Specialized for all types of cleaning and degreasing.may be applied by brush,handspray or used in ultrasonic cleaning tanks,immersion soak tanks and high and low pressure spray appliances.May be used neat or diluted by up to 50 parts of water according to the amount and type of soil to be removed.
BIOCleaner for Oil & Grease
Applications:
-
Engine rooms and machinery spaces
-
Workshop floors and maintenance areas
-
Oil-contaminated surfaces
-
Grease traps and drainage areas
-
Industrial equipment and machinery
-
Marine and offshore facilities
-
Oil and grease wastewater treatment applications
Product Name: BIOCleaner – Biological Oil & Grease Cleaner
BIOCleaner for Oil & Grease is a powerful biological cleaning solution designed to break down and remove oil, grease, fats, and other organic contaminants from industrial and marine surfaces. Its bio-based cleaning action helps reduce heavy oil and grease deposits while supporting environmentally responsible cleaning practices.
Directions:
Dilute concentrate with water for desired effective cleaning: IE: 1:15 (1 part concentrate to 15 parts water)
| Wax Stripping- | 1:15 | Pressure washer/Steam Cleaning- | 1:20 |
| Floor Cleaning- | 1:30 | Car and Truck wash- | 1:20 |
| Spot Remover- | 1:5 | Machinery and Equipment- | 1:10 |
| Aircraft Cleaning- | 1:5 | Carpet and Upholstery Cleaner- | 1:40 |
| Grease- | 1:5 | Hard water deposits | 1:5 |
| Oil film- | 1:5 | General Purpose cleaning- | 1:20-50 |
| For heavy duty degreasing before pressure washing - | 1:5-10 | ||
| For removal of rubber tire marks from concrete use undiluted with agitation. | |||
Apply with a sprayer, sponge, brush or steel wool. Agitate as required. Rinse thoroughly with water. Allow to air dry or wipe dry on smooth surfaces.
CAUTION:
Eye irritant. Contains sodium metasilicate. Avoid contact with eyes. If eye contact occurs, flush with water for 15 minutes. If irritation persists, consult a physician. Do not take internally. If swallowed, do not induce vomiting. Drink large volumes of clear water followed by a weak vinegar solution. If irritation persists, call a physician. KEEP OUT OF REACH OF CHILDREN.
Key Benefits:
-
Effectively breaks down oil and grease contamination
-
Suitable for heavy organic deposits and oily residues
-
Helps reduce manual cleaning effort
-
Supports environmentally responsible cleaning
-
Suitable for marine, industrial, workshop, and wastewater applications
-
Helps control recurring oil and grease contamination
-
Can be used for cleaning floors, machinery, equipment, tanks, and oily surfaces
| Product Name | BIOCleaner for OIL GREASE |
| Product Type | Degreaser RXSOL-10-1717-025 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 / 27611360 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| 123@rxmarine.com |
Oxidation blowing and chemical reaction of Fatty alcohol derivative, non-ionic surfactants,phosphates , EDTA, potassium hydroxide and remaining which is not in the list of hazardous materials . 100% Biodegradable content.
|
Environmental Hazards |
None ( > 90% INGREDIENTS are bio degradable.) |
|
Human Health Hazards |
Moderates |
R 36/38: Irritating to eyes and skin.
|
Inhalation |
supply or remove to fresh air , Not relevant |
|
Skin Contact |
Rinse with running water and soap. Remove contaminated clothes. |
|
Eye Contac |
Flush with running water for at least 15 minutes Immediately |
|
Ingestion |
Seek medical attention , try to drink more fresh water |
|
Suitable |
N.A. can use all extinguishing media like foam dry Co2 , water-spray. |
|
Not suitable |
Not applicable |
|
Special |
Not applicable |
|
Protection of fire Fighter |
Not applicable |
|
Precaution for fire-fighters |
Wear protective equipme |
Non combustible product
|
Enviromental Precaution |
Direct flow into drainage system, surface or ground water is prohibited. |
|
Cleaning Method |
Flush Spill Area with Water and remove with liquid-absorbing material like foam sand,sawdust etc.. |
|
Condition to Avoid |
Non flammable but avoid direct heating |
|
Materials to Avoid |
Do not subject to Acidic / Oxidizing Agents. |
|
Handling |
Keep Container Tightly Closed |
NOTE :Eyewash facilities require at workplace
- The product causes corrosion on skin and mucous membranes Pl. Note that In case of discharge of acidic or alkaline products into the sewerage system the pH must be in the range of 6-10 since higher or lower pH values may damage the sewerage system or impair biological dosage treatment plants. So that for maintaining pH we have to add acidic / basic medium neutaliser . For example if pH is less than 6 basic neutraliser is required and if pH is more than 10 acidic nature neutraliser is required. For details of any guideline pl. Visit our technical website www.rxmarine.com
• Dilute in water (always use plastic jar and RXSOL should be added to water never add water to RXSO
Personal Protection:
|
Respiratory System Protection |
Approved respirator must be worn when spraying. |
|
Eye Protection |
wear eye protection (on possibility of contact ). |
|
Hand protection |
wear PVC chemical resistance protective gloves. |
PRODUCT PROPERTIES :
|
Appearance |
Clear liquid |
|
Density |
In g/cm3 at 20°C: 1.1 |
|
Compatibility |
|
|
Metal |
No known effect |
|
Rubber |
No known effect |
|
pH |
Alkaline ( 12.5 ) . |
|
Flash point |
Not Applicable |
|
Solubility |
100% soluble in water |
|
Hazardous Decomposition Products |
Do not occur if stored and used as directed. In FIRE combustion CO, CO2 , NH3 , SOX etc hazardous gas. |
|
Comment |
Not applicable , Emulsifies in water . Product is giving irritation on skin. |
95 % added surfactants are biodegradable as per by international regulation . But strictly This material must be disposed with local national regulations.
As per guide line of local rules and regulation and before disposal and neutralization pl. refer 07 article.
|
Proper Shipping Name |
EMULSIFIER Solution |
|
Proper Shipping Name: Sodium hydroxide, solution UN No. |
1824 |
|
Hazard Class |
8 Packing Group II |
|
Road/Rail (ADR/RID) |
|
|
Proper Shipping Name |
EMULSIFIER Solution |
|
ADR UN No. |
1824 |
|
ADR Hazard Class |
8 Tremcard: 80S1824 |
HARMFUL
R22 HARMFUL IF SWALLOWED.
R41 RISK OF SERIOUS DAMAGE TO EYES.
S13 KEEP AWAY FROM FOOD, DRINK AND ANIMAL FEEDINGSTUFFS.
S25 AVOID CONTACT WITH EYES.
S39 WEAR EYE/FACE PROTECTION.
S41 IN CASE OF FIRE AND/OR EXPLOSION DO NOT BREATHE FUMES.
(R35: Causes severe burns.
R41: Risk of serious damage to eyes.)
The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications - usage in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from manufacturer .This information is based on our current level of knowledge and relates to the product in the state in which it is delivered. It is intended to describe our products from the point of view of safety requirements and is not intended to guarantee any particular properties.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.