Name: BARRIER HOLD COAT
Brand: Kolkata Chemical
Availability: InStock

BARRIER HOLD COAT is a highly effective ecofriendly Product blending of natural ingredients which is provide thin temprory film on Hold Surface to protect corrosion. This is making barrier between corrosive cargo like Sulphur, Salt, Petcoak, Cement etc and Hold surface.

RXSOL Bilge Coat (Sulphur Acid Neutralizer) Acts as Acid Neutralizer formed during sulphur voyages.

Application

The cargo hold surfaces should be as clean and dry as possible before treatment. Barrier Hold Coat is supplied at ready-to use concentration and may be applied directly from the drum. Spray the liquid on the cargo hold surfaces by the use of suitable low-pressure spraying equipment. As soon as the surface appears water wet, a proper film is created; do not apply more than necessary. Barrier Hold Coat will cover 15-20 m2 / Ltrs. Allow the film to dry completely before loading the cargo. Depending on air temperature and humidity this will take 1 to 2 hours. After reloading, apply a 2 – 5% solution of a cleaning agent in water to avoid re-deposition of contaminants, and finally flush with clean, high pressure water. Suitable cleaning agents like Rxtuff, Rxtuff High Foam or Aquabreak Rx.

After flushing with water, let the surfaces dry and then repeat the treatment with applying Barrier Hold Coat before next cargo.

Dose

Barrier Hold Coat be direct use on clean and Dry surface. 1 Ltrs Hold Barrier Coat will be cover 15-20 m2.

It can be easily applied by vessel crew before loading. BARRIER HOLD COAT is effectively prevents stains and footprints of cargoes adhering to the surfaces of cargo holds and causing corrosion and are difficult to clean. Therefore, cargo holds can be kept clean with much less effort and cost. The main advantage of BARRIER HOLD COAT is that it forms a water soluble cargo hold barrier that can be removed very easily, even with the use of cold sea water. BARRIER HOLD COAT is safe to the environment and to the personnel handling it, and will not contaminant the cargo. It is non-corrosive and safe on all coatings. BARRIER HOLD COAT acts as a barrier and release agent between the cargo hold surface and the next cargo. It should be applied on clean surfaces.

Technical specifications

• Water soluble cargo hold barrier – easily removable with water
• Saves cleaning time and cleaning chemicals
• Ideal when cleaning after coal, pet coke and other difficult cargoes.
• Completely safe on all coatings.
• Prevents even the most difficult cargo to adhere to the coating
• Easy to apply – easy to remove
• Provides temporary protection against corrosion
• Water based - free from hydrocarbon solvents.
• Complies with all environmental regulations

Note

This Emulsion is safe to use , But as a precaution goggles & Protective gloves with mask require before use of this materials.

Precaution : 1 > Deposition of previous cargo / Lime wash should be removed .
2 > Newly Painted surface should be fully cured.

Other Valuable Hold Cleaners :::

Cement Remover RX Hold ::: Highly concentrated and powerful penetrating agents materials which is effectively react with cement to loosen the bonding strength . Best results can obtain on dry surface of cement. RXSOL'S R & D has developed this molecular cement dissolver. Part No.- RXSOL-22-2202-025, Part No.- RXSOL-22-2202-020, Part No.- RXSOL-22-2202-050

Part No.- RXSOL-22-2202-035, Part No.- RXSOL-22-2202-210

Slip Barrier Coat RXSOL HOLD BLOCK ::: Polymer EMULSION BASED non reactive coating materials which makes thin film barrier on surface after dry. Due to formation of RXSOL THIN barrier film on surface, the cleaning operation after unloading becomes quicker and easier with optimum results. Part No.- RXSOL-22-2210-210, Part No.- RXSOL-22-2210-025, Part No.- RXSOL-22-2210-050

BARRIER HOLD COAT ::: Highly effective ecofriendly Product blending of natural ingredients which is provide thin temprory film on Hold Surface to protect corrosion. This is making barrier between corrosive cargo like Sulphur, Salt, Petcoak, Cement etc and Hold surface. Part No.- RXSOL-22-2211-210

COAL REMOVER rx hold ::: A powerful penetrating mixed chemical products to remove heavy coal deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems. Part No.- RXSOL-22-2215-210, Part No.- RXSOL-22-2201-025, Part No.- RXSOL-22-2201-050

Hold Wash Concentrate RX ::: RXSOL hold wash is a versatile all purpose marine cleaning solution it can be used as a powerful stand alone cleaner for Petroleum oily stains and residues, vegetable and animal fats, as well as dirt, proteins, soils, coal, ore, coke or in combination. Part No.- RXSOL-22-2204-210, Part No.- RXSOL-22-2204-025, Part No.- RXSOL-22-2204-050

Rock Phosphate Cleaner rx hold ::: A powerful penetrating mixed chemical products to remove heavy Rock Phospate deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems. Part No.- RXSOL-22-2201-210

PCS Hold Clean ::: RXSOL PCS is an innovative, concentrated liquid product specifically engineered to attack, penetrate and remove Coal Carbon, pet coke, lime deposition accumulations from cargo and storage tanks, Also Developed for cargo hold cleaning to remove stains. Part No.- RXSOL-22-2208-210

HBI CARGO Hold Wash Concentrate RX::: RX HBI CARGO Hold Wash Concentrate RX is a versatile all-purpose QUALITY marine cleaning solution. It can be used as a powerful stand-alone cleaner for HBI CARGO . it can be used as a powerful\ stand alone cleaner for HBI CARGO dust and deposition. Part No.- RXSOL-22-2216-210, Part No.- RXSOL-22-2216-025

Remarks / Precaution

BARRIER HOLD COAT provide transparent polymer film layer on the hold surface.

Other Important materials , which help to control corrosion on metal surface. Chemically SULPHUR producing STRONG acid in presence of moisture under excess of temperature, Freshly prepared acid during the reaction rapidly damaging steel surface. This can be prvented by ACID neutralisation method. RXSOL BILGE COAT is specially meant to solve this issue. For more details of product, You may click here to know more details about product and using procedure.

MSDS

Product name	RXSOL-22-2211-210
Product type	BARRIER HOLD COAT

Company Details
RX MARINE INTERNATIONAL
105 , A-wing, BSEL TECH PARK
VASHI , NEW BOMBAY 400705
INDIA

Stock Point : Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Muscat, Fujairah

Phone	+91 22 27815541 / 42
Fax	+91 22 2781 1318 :::AOH :0091 9821214367
Email	mail@rxmarine.com ,

Chemical Name	Concentration
Polyvinyl Alcohol	5-10
Contains POLYMER Calcium Carbonate	5 5-10
Not Classified Ingredient	70 - 75

Odour	Odourless
Appearance	Liquid, White
Contact with eyes	Can cause damage to the eyes
Contact with skin	Can cause damage to the skin
Inhalation	Vapours or aerosols may cause irritation of eyes, nose and respiratory tract
Ingestion	The ingestion of significant quantities may cause damage to stomach lining
Environmental Hazards	None
Human Health Hazards	Moderates

R 35:Causes skin burning effects

General	In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) (S45)
Inhalation	Harmful,. supply or remove to fresh air and seek medical advice attention
Skin Contact	May cause irritation Rinse with running water and soap. Skin care. Remove contaminated clothes. Remove contaminated clothing immediately and drench affected skin with plenty of water. Then wash with soap and water Seek medical advice if necessary Contaminated clothing should be laundered before reuse
Eye Contact	If substance has got into eyes, immediately wash out with plenty of water for at least 15 minutes ( Flush with running water for at least 15 minutes Immediately . ) Obtain immediate medical attentionContinue flushing with water until medical help arrives
Ingestion	Vomiting is dangerous , seek medical attention. ( Do not induce vomiting ) Never give anything by mouth to an unconscious person Give plenty of water to drink Obtain immediate medical attention

Non combustible Decomposition products may include toxic and irritant fumes Not flammable. In case of fire use extinguishing media appropriate to surrounding conditions

Suitable	N.A. can use foam dry Co2 , water-spray.
Not suitable	Not applicable
Special	Not applicable
Protection of fire Fighter	Not applicable
Flashpoint	> 250º C
Special protective equipment for fire-fighters	Wear protective equipment.

Personal Precautions	Wear protective clothing as per section 8
Environmental Precautions	Do not allow to enter public sewers and watercourses
Immediate Actions	Contain spillage by any means possible
Clean Up Actions	Absorb spillage in inert material and shovel up Ventilate the area and wash spill site after material pick-up is complete
Special Precautions	Wear protective clothing as per section 8
Enviromental Precaution	Direct flow into drainage system, surface or ground water is prohibited.
Cleaning Method	Flush Spill Area with Water andremove with liquid-absorbing material like foam sand,sawdust etc..

Handling	The usual precautions for handling chemicals should be observed See Section 8 Eyewash bottles should be available.
Storage	Keep only in the original container in a cool, well ventilated place (S3/9/49) Protect from frost.
Condition to Avoid	Non flammable but avoid direct heating
Materials to Avoid	Do not subject to Acidic / Oxidizing Agents.
Handling	Keep Container Tightly Closed

NOTE : Eyewash facilities require atworkplace The product causes corrosion on skin and mucous membranes Pl. Note that In case of discharge of acidic or alkaline products into the sewerage system the pH must be in the range of 6-10 since higher or lower pH values may damage the sewerage system or impair biological dosage treatment plants. So that for maintaining pH we have to add acidic / basic medium neutaliser . For example if pH is less than 6 basic neutraliser is required and if pH is more than 10 acidic nature neutraliser is required. For details of any guideline pl. Visit our technical website www.rxmarine.com

Dilute in water (always use plastic jar and RXSOL should be added to water never add water to RXSOL.)

Exposure Limits	There are no recommended or established controls for this product
Exposure controls	No special ventilation is required unless the product is used in a spray form
Occupational exposure controls	Wear suitable protective clothing, including eye/face protection and gloves (plastic or rubber are recommended) During fumigation/spraying wear suitable respiratory equipment (S42)
Personal protection
Respiratory System Protection	Approved respirator must be worn when spraying
Eye Protection	wear eye protection (on possibility of contact )
Hand protection	wear PVC chemical resistance protective glove

PRODUCT PROPERTIES:

Appearance	White liquid emulsion
Density	In g/cm3 at 20°C: 1.01
Compatibility
Metal	No known effect
Rubber	No known effect
pH Flash point	Alkaline ( 7 to 8 ) . Not Applicable
Solubility	100% soluble in water
Packaging	210 Size (in Litres)

-  Stable
-  Avoid overheating, Keep away from frost
- See Section 5
- Hazardous Decomposition Products:
   Do not occur if stored and used as directed. In FIRE combustion CO, CO2 , NH3, SOXetc hazardous gas produced.
NOTE : AVOID CONTACT WITH ACID

Toxicological information	No experimental data available.
Inhalation	Vapours or aerosols may cause irritation of eyes, nose and respiratory tract.
Contact with skin	Prolonged skin or eye contact may cause chemical burns.
Contact with eyes	Prolonged skin or eye contact may cause chemical burns.
Ingestion	The ingestion of significant quantities may cause burning sensation.
Carcinogenicity	No evidence of carcinogenic effects.
Inhalation	Vapours or aerosols may cause irritation of eyes, nose and respiratory tract.
LD50 (oral)	> 2000 mg/kg - (Polyvinyl alcohol, partly saponified).

No components of this material are toxic to aquatic organisms, product are readily biodegradableas per by international regulation . This material must be disposed with local national regulations. Aquatic Toxicity.

Classification	This material and/or its container must be disposed of as hazardous waste EU Waste class: 06 02.
Disposal considerations	Do not discharge into drains or the environment, dispose to an authorised waste collection point. Disposal should be in accordance with local, state or national legislation.

As per guide line of local rules and regulation and before disposal and neutralization pl. refer 07 article.

Transport over land ADR/RID : Not classified as hazardous for transport

- In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible)

Classification and labelling

Not classified as hazardous for users- S2 : Keep out of reach of children S26 : Incase of contact with eyes, rinse immediately with plenty of water and seek medical advice. S28 : After contact with skin, wash immediately with plenty of water. S37/39 : Wear suitable gloves and eye/face protection.

This information is based on our current level of knowledge and relates to the product in the state in which it is delivered. It is intended to describe our products from the point of view of safety requirements and is not intended to guarantee any particular properties Text of R and S phrase codes used in this safety data sheet:-

R34	Causes burns;
R37	Irritating to respiratory system.

The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper applic- ation(s). The product is not sold as suitable for other applications - usage in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from manufacturer

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

BARRIER HOLD COAT

Need a quote for this product?