It is a high quality drilling grade Barite (Barium Sulphate) used to increase the density of drilling fluids. It is the most widely used drilling weight material due to its high specific gravity. It meets API 13A requirements.
Barytes (or barite) is a naturally occurring mineral form of barium sulphate. It is extracted by both surface and underground mining. Its main properties are its high specific gravity 4.2 – 4.5, very low solubility; it is non-toxic, and also chemically and physically non-reactive, low abrasiveness and opaqueness to x-rays.
Oil well Drilling
Barite is used as a weighing agent in oil well-drilling fluids to counteract certain pressures that result from well drilling operations. In this process, Barite is crushed and mixed with water & other materials. It is then pumped into the drill hole. The weight of this mixture counteracts the force of the oil and gas when it is released from the ground. This allows the oil and gas rig operators to prevent the explosive release of the oil and gas from the ground.
Paper-Making Industry
In the paper industry, high-refined barites powder can be used as the filling of white paperboard and coat paper, improve the whiteness and percentage of coverage.
Cosmetics:
When used in cosmetic industry, the properties of barite powder such as high whiteness, gentle and harmless to skin allow it to replace titanium dioxide.
White pigments
Barite is a key player in preparing white pigment (lithopone) which is a mixture of barium sulphate and zinc sulphide. This pigment is used in making white paint that is used to give a chic appearance to wooden artifacts.
Paints, Enamel and coatings
In dope and painting, it can be used as a filler and can take the place of some expensive material such as basofor, crypton, titanium dioxide, activity, monox etc. Control the viscosity of the paint compatibly to make the products with bright color, good stability.
Adhesives & Sealants
Barite is dense, inert, sound & radiation-absorbing fillers for special sealants and adhesives. It is included where a higher weight is wanted in the adhesive.
Rubber
In rubber industry, the products less than 600 mesh is used as the filling of rubber products to save cost. It improves the intensity, acid, alkali and water proof. The grinded barite powder is important additive to improve its hardness, wear resistance and anti-aging properties. It makes better the reinforcing action of caoutchouc and synthetic rubber too.
Plastic Industry
In plastic industry, it is used as the filling of plastic ABS (Acrylonitrile - Butadiene - Styrene) to make the products with bright color. It boosts the intensity, stiffness and abrasive resistance of the plastic.
Pharmaceutical Industry In medicine, it can be used as barium meal material for the intestines and stomach reflection, and also the filling for plaster.
|
Appearance |
: Free Flowing Powder |
|
Specific Gravity |
:4.2 g /cm3 Min |
|
Water soluble earth alkaline metals as Calcium |
: 90 - 100 o F |
|
Character |
: Non – Ionic |
|
Wet screen Analysis% |
|
|
Residue on us sieve no.200 |
: 6-8 |
|
Residue on us sieve no.325 |
: 6-8 |
Advantage:
• It does not react with other drilling Fluids or hamper their functioning
• It is chemically inert and insoluble
Low oil absorption
Easily dispersed
Chemically inert
Unaffected by acids and alkali
Insoluble in water
Stable at high temperatures
Applications
- Used widely as a filler in plastics
- Ideal for making putties, primers, undercoat, epoxy paints, powder coatings and floor coating
- Recommended for water proofing compounds and sealants
| Chemical Composition | |
|---|---|
| BaSO4 | 97% (± 2%) (Typical) |
| SiO2 | 1% |
| Fe2O3 | 0.10% |
| Al2O3 | 0.05% |
| CaO | 0.20% |
| MgO | 0.09% |
| LOI | 0.65% |
| Physical Properties | |
|---|---|
| Specific Gravity | 4.4 |
| Hardness | 3 to 3.5 (mohs) |
| Whiteness | (Brightness) - 94 |
| Oil absorption value | 10 |
| Moisture and volatile matter max | 0.5% by Wt. (105 deg. C) |
| Water soluble matter max | 0.5% |
| MgO | 0.09% |
| Refractive index | 1.64 |
| Bulk Density |
1.8 |
| Product Name | RXSOL-81-8103-050 , Inorganic barium Salt |
| Product Type | Barite, Drilling fluid additive |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 27611360 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |
|
Chemica Name |
Concentration |
CAS Number |
LD50Oral-Rat |
|
Barium sulfate |
70-100 |
7727-43-7 |
Not Available |
|
Odour |
Characteristic odour. |
|
Appearance |
Powder |
|
Contact with eyes |
No adverse effect expected. |
|
Contact with skin |
In cases of severe exposure, irritation may develop. |
|
Inhalation |
May cause irritation of the upper respiratory tract. |
|
Ingestion |
No adverse effect expected. |
|
Contact with skin |
If irritation occurs, or when shift ends, wash with soap and water until clean. If irritation persists, obtain medical attention. |
|
Contact with eye |
Flush eyes with gently flowing warm water until particles are dislodged. If irritation persists, obtain medical attention
|
|
Ingestion |
If fully conscious, give a large quantity of water. Obtain medical attention. Never give anything by mouth if a patient is unconscious, rapidly losing consciousness or convulsing.
|
|
Inhalation |
Move to an area free from dust. Apply oxygen or artificial respiration if required. If breathing difficulties or distress continues, obtain medical attention.
|
|
General |
In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible)(S45) |
|
Fire-fighting measures |
FLASH POINT: Not flammable.
FLAMMABLE LIMITS: Not applicable.
EXTINGUISHING MEDIA: Use media suitable for packaging and
surrounding fire.
SPECIAL FIRE FIGHTING PROCEDURES: Self-contained breathing apparatus required for
fire-fighting personnel.
UNUSUAL FIRE AND EXPLOSION HAZARDS: None.
HAZARDOUS COMBUSTION PRODUCTS: No information available.
|
|
Personal Precautions |
Wear protective clothing as per section 8
Avoid breathing dust. Practice reasonable caution and personal cleanliness. Launder contaminated clothing before reuse. Store in a cool dry area.
|
|
Environmental Precautions |
No special precautions are required for this product Immediate Actions. |
|
Clean Up Actions |
STEPS TO BE TAKEN IN CASE THE MATERIAL IS SPILLED OR RELEASED
Use appropriate safety equipment. Collect uncontaminated material for repackaging. Collect
contaminated material in appropriate containers for disposal.
WASTE DISPOSAL METHOD Dispose of in accordance with federal, provincial and local regulations. It is the responsibility of the end user to determine if the material meets the criteria of hazardous waste at the time of disposal
|
|
Handling |
SPECIAL PROTECTION INFORMATION
RESPIRATORY PROTECTION: Approved dust mask required for dust levels
below TLV. Use approved respirator with dust
cartridges if airborne concentration exceeds TLV.
VENTILATION: Use local exhaust ventilation, process enclosure
or other engineering controls to maintain
concentration of airborne dust below TLV.
PROTECTIVE GLOVES: Personal preference.
EYE PROTECTION: Suggest goggles or safety glasses with side-shields
be worn.
OTHER PROTECTIVE EQUIPMENT (SPECIFY): Ensure eye way station and emergency shower are available.
|
|
Storage |
Keep at cool, well-ventilated place (S3/9/49) Protect from frost. |
|
Exposure Limits |
There are no recommended or established controls for this product. |
|
Exposure controls |
No special ventilation is required unless the product is used in a spray form. |
|
Occupational exposure controls |
Wear suitable protective clothing, including eye/face protection and gloves (plastic or rubber are recommended) No respiratory protection is required unless subject to contact with substance mist. |
Gloves Goggles Suit No_smoking
|
Odour |
Dirt/dust like odour |
|
Appearance |
Grey powder |
|
pH |
7.0 – 9.5 |
| Solubility In Water | Insoluble |
| Volatile Percent | Not Applicable |
|
SPECIFIC GRAVITY |
4.1 – 4.4 SP.G |
| Melting Point | 1580 |
|
Boiling Point |
Not known |
| BULK DENSITY | Not available |
| VAPOUR DENSITY (air = 1) | Not available |
| VAPOUR PRESSURE (mmHg) | Not applicable |
STABILITY: STABLE
- See Section 5
|
Toxicological information |
No experimental data available Inhalation. |
|
Contact with skin |
In cases of severe exposure, redness and irritation may develop. |
|
Contact with eyes |
Causes irritation. |
|
Ingestion |
May cause gastrointestinal disturbances |
|
Carcinogenicity |
No evidence of carcinogenic effects. |
|
Ecotoxicity |
This product does not contain ingredients which are classified in the EU as dangerous for the environment. |
|
Mobility |
Not soluble in water |
|
Classification |
This material and/or its container must be disposed of as hazardous waste EU Waste class |
|
Disposal considerations |
Do not discharge into drains or the environment, dispose to an authorised waste collection point Disposal should be in accordance with local, state or national legislation |
- Not classified as hazardous for transport
|
Risk Phrases |
Irritating to eyes (R36) |
|
Safety Phrases Irritant |
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice (S26) Wear suitable gloves and eye/face protection (S37/39) |
Text of R and S phrase codes used in this safety data sheet:- R36: Irritating to eyes; R37: Irritating to the respiratory system. The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s).
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.