Name: Aqua Clean Tuff High Foam
Brand: Kolkata Chemical
Availability: InStock

Aqua Clean Tuff liquid always be wise decision to clean ship cargo hold. As before loading of cargo surveyor first demand is - Holds must be thoroughly cleaned and dry and trace free of previous cargo in frames.

beams, girders, and other structure.

Aqua Clean Tuff plays very important role in hold cleaning and general digressing. It is a heavy duty non-corrosive concentrated cleaning compound soluble in fresh and salt water , also suitable with high presure cleanig machines.

Application

Most Helpfull cleaner for preparation of a cargo hold. In general cleaning of vessel's cargo holds Aqua Clean Tuff CLEANER plays very important role in washing down with use of chemicals. Aqua Clean Tuff classified as Marine Chemicals, Cleaning Chemicals; Cargo Hold Cleaning detergent.

Dose

Refer this link for complete set of HOLD CLEANING KIT ::: http://rxmarine.com/Ship-hold-cleaning-kit-set-supplier

The Importance High-Pressure Cleaning

The job of high-pressure cleaning can be done easier & quicker by simply using Aqua Clean Tuff incorrect dosages. Using a high-pressure cleaner alone, without any CLEANER, will not achieve optimal cleaning results High-pressure cleaning primarily refers to cleaning of Hard surfaces, such as Decks, Tanks, Engine-rooms, etc. and in the majority of cases the cleaning is done according to the so-called two-step method:

Step 1: Spraying the Aqua Clean Tuff over the area to be cleaned.
Step 2: Washing down the area using a high-pressure water jet.

After the Aqua Clean Tuffv has been sprayed on the surface and before the wash down begins, the chemicals penetrate & thoroughly moistens dirt & other grime. During wash down, the Aqua Clean Tuff thoroughly dissolves the particles of dirt, even oil and fat, in the water spray and thus achieves optimal cleaning results.In addition to being more effective, the use of Aqua Clean Tuff substantially reduces the time required for the Cleaning operation, as well as preventing dirt from reforming on the surface. The use of Aqua Clean Tuff in correct dosages is half the job done.

General Cleaning :- Aqua Clean Tuff can be used for all types of cleaning & degreasing & may be applied by Brush, Hand spray, high and low-pressure washing machines etc. Time necessary for cleaning depends on the nature and thickness of the deposits. 20-30 min. will suffice for   most applications. Hardened, carbonised or aged deposits may require up to 4 hours. If the cleaning solution is not heavily contaminated, it may be re-used at a later stage. If allowed to cool, the de-gassing procedure must be repeated. Depending on the degree of contamination Aqua Clean Tuff CLEANER should be mixed with warm water at a rate of 50-200 ml   per 10 litres. i.e. 1 cup of Aqua Clean Tuff to a bucket of water. The Aqua Clean Tuff solution can be applied simply by mops, brushes or rags, or by dipping the soiled articles into the Aqua Clean Tuff solution. After cleaning, rinse off with cold or warm water. Due to high foaming properties, Aqua Clean Tuff is not recommended for washing machines.

20-50 % with fresh water . Also acts as an acid-neutralizing agent for Boiler & Colling systems during cleaning & maintenance.
Heavy Soil deposition Use Undiluted from to 20-50% diluted with water.
Medium soil deposition               10-20% diluted with water.
Light Soil ( general degreasing )   5-10% diluted with water.

Technical specifications

Tips for Hold cleaning - Prior to high pressure hold washing, excess cargo residue on the tank top should be removed by hand sweeping and lifted out of the holds via the use of a portable mucking winch. After all excessive cargo residue has been removed then the holds can be washed with salt water using a highpressure hold cleaning gun, supplemented by the deck air line to provide increased pressure. This is the most commonly used method of hold cleaning. Then use Aqua Clean Tuff hold cleaning Marine Chemicals. Cleaning Chemicals; Cargo Hold Cleaning detergent to get optimum result.

Note

Aqua Clean Tuff is absolutely free along with the purchase of Slip Barrier Coat - Hold block materials. Aqua Clean Tuff Free 1000 Ltr against 1000 Ltrs purchase of Slip Barrier Coat Plus at our Mumbai, Visakhapatnam, Ennore, Kolkata, Kandla - Gandhidham, Fujairah - Gulf.

For degreasing and removal of residues of minerals oil , coal stain and soot from surface.
superior & powerful alkaline cleaner. It is low toxic product with an exceptional solvency power on soil & oily matter & having good foaming qualities. It is free from Hydrocarbon solvents , Biodegradable and minimizes the extreme hazards to personnel in handling materials .
Safety Phrases
S-2 Keep out of the reach of children.
S-26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S-36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
S-45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).

Preparation

Preparing Cargo Holds for loading Grain depends on the previous cargo.

1. Cargo Holds must be thoroughly cleaned and dry and trace of previous cargo in frames, beams, girders, and other structure.

2. There should not be any loose rust and or paint scale anywhere in the Cargo Holds, Bulkheads, upper and lower hopper spaces, underneath of Hatch Covers and tank top.

3. There should not be traces of live & dead insect & weevils.

4. Bilge covers should be cleaned of any cargo residues and have enough drain holes. Bilge cover needs to be grain tight but not watertight.

5. Bilge well should be cleaned of previous cargo dray and odour free.

6. Bilge suction should be operational at all the times.

Removal of cargo residue:

Air Blow from top using high pressure air to reach all accessible corners. Cargo to be swept, scrapped & collected in a drum. Attention to be given

• Australian ladder and its platforms and stanchions

• Beams and girders under cross decks

• Frames, beams, girders, and other structure

• Large pipes holding brackets behind the pipes

Then Cleaning and sweeping coal cargo from the hold as maximum possible by HELPER / Crew member

Loose Rust & Paint Scale:

A sharp hand scraper shall be used to take off the peeling rust & paint scale Special attention to following areas:

• Australian ladder and its platforms, hand rails and stanchions

• Australian ladder and its platforms and stanchions

• Beams and girders under cross decks

• Frames, beams, girders, and other structure

• Large pipes holding brackets behind the pipes

• Hatch coamings and under hatch covers

• Booby hatches & cover

Tank top loose rust

Tank top should be free of loose rust and cargo residue

Any rust which can be scraped by hand scrapers should be removed.

The tank top should be rinsed with fresh water

Cleanliness of cargo hold bilges

Hold bilges must be cleaned thoroughly to remove all residue, rust particles and cargo stains etc.

The filter (Rose Box) must be cleaned thoroughly

The bilge well sections shall be washed with continuous running of sea water to remove all odour and later rinsed with fresh water

Remarks / Precaution

Hold Cleaning Preparation and Method :

Preparing Cargo Holds for loading Grain depends on the previous cargo.

1. Cargo Holds must be thoroughly cleaned and dry and trace of previous cargo in frames,

beams, girders, and other structure.

2. There should not be any loose rust and or paint scale anywhere in the Cargo Holds,

Bulkheads, upper and lower hopper spaces, underneath of Hatch Covers and tank top.

3. There should not be traces of live & dead insect & weevils.

4. Bilge covers should be cleaned of any cargo residues and have enough drain holes. Bilge

cover needs to be grain tight but not watertight.

5. Bilge well should be cleaned of previous cargo dray and odour free.

6. Bilge suction should be operational at all the times.

Removal of cargo residue:

Air Blow from top using high pressure air to reach all accessible corners. Cargo to be swept,

scrapped & collected in a drum. Attention to be given

• Australian ladder and its platforms and stanchions

• Beams and girders under cross decks

• Frames, beams, girders, and other structure

• Large pipes holding brackets behind the pipes

Then Cleaning and sweeping coal cargo from the hold as maximum possible by HELPER / Crew member

Loose Rust & Paint Scale:

A sharp hand scraper shall be used to take off the peeling rust & paint scale

Special attention to following areas:

• Australian ladder and its platforms, hand rails and stanchions

• Australian ladder and its platforms and stanchions

• Beams and girders under cross decks

• Frames, beams, girders, and other structure

• Large pipes holding brackets behind the pipes

• Hatch coamings and under hatch covers

• Booby hatches & cover

Tank top loose rust

Tank top should be free of loose rust and cargo residue

Any rust which can be scraped by hand scrapers should be removed.

The tank top should be rinsed with fresh water

Cleanliness of cargo hold bilges :

Hold bilges must be cleaned thoroughly to remove all residue, rust particles and cargo stains etc.

The filter (Rose Box) must be cleaned thoroughly

The bilge well sections shall be washed with continuous running of sea water to remove all odour and later rinsed with fresh water

MSDS

Product Name	:	RXSOL-25-3033-210
Product Type	:	Aqua Clean Tuff

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Stock Branch ::: Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Fujairah, Muscat Oman, Nairobi

Phone	:	+91 22 27815541 / 42
Fax	:	+91 22 2781 1318 :::AOH :0091 9821214367
Email	:	mail@rxmarine.com

Chemical Name	Concentration	CAS Number	EC Number	R Phrases*	Symbols
Potassium Hydroxide	10-15%	1310-58-3	215-181-3	35	C
2-butoxy ethanol	1-5%	111-76-2	203-905-0	X
Fatty alcohol ethoxylate	5-10%	34398-01-1	500-084-3	41
Di-Sodium Meta Silicate	1-5	10213-79-3	229-912-9	34,37
Disodium cocoamphodiacatate	1-5	68650-39-5	272-043-5	36 Xi
Cocamide DEA	1-5	68603-42-9	271-657-0
Non classified ingredients	60-70

Odour	Odourless
Appearance	Liquid, colourless , soluble in water
Contact with eyes	Corrosive to eyes, Can cause damage to the eyes
Contact with skin	Causes burns (R35)
Inhalation	No information available but must be considered harmful
Ingestion	Harmful if swallowed (R22)

Contact with skin	Remove contaminated clothing immediately and drench affected skin with plenty of water. Then wash with soap and water.Seek medical advice if necessary
Contact with eyes	If substance has got into eyes, immediately wash out with plenty of water for at least 15 minutes.Irrigate eyes thoroughly whilst lifting eyelids.Obtain immediate medical attention. Continue flushing with water until medical help arrives.
Ingestion	Do not induce vomiting.Never give anything by mouth to an unconscious person.Give water or milk to drink.Obtain immediate medical attention.
Inhalation	Seek medical attention if ill effects occur
General	In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) (S45) When in doubt or symptoms persist, seek medical attention

Non combustible. Smoke from fires is corrosive. Not flammable. In case of fire use extinguishing media appropriate to surrounding
conditions. Vapour density - not applicable.

Personal Precautions	Wear protective clothing as per section 8
Environmental Precautions	Do not allow to enter public sewers and watercourses
Clean Up Actions	Absorb spillage in inert material and shovel up.Ventilate the area and wash spill site after material pick-up is complete Neutralise with Acid
Special Precautions	Wear protective clothing as per section 8

Handling	Eyewash bottles should be available.See Section 8.
Storage	Keep only in the original container in a cool, well ventilated place (S3/9/49) Protect from frost.

Exposure Limits	OES / LTEL # ppm 2 mg/m3 (Sodium hydroxide).
Exposure controls	No special ventilation is required unless the product is used in a spray form.
Occupational exposure controls	Wear suitable protective clothing, including eye/face protection and gloves (plastic or rubber are recommended) During fumigation/spraying wear suitable respiratory equipment (S42).

gloves suit. goggles no_smoking

Gloves Suit. Goggles No_Smoking

Odour	Odourless
Appearance	Liquid, colourless to yellow, soluble in water
pH	11.5 - 12.5 at 0.1 % concentration, pH 13 - 14 at 100 % concentration
Boiling point	>100 °C at 760 mm /Hg
Vapour pressure	not known
Vapour density	not applicable
Freezing point	5 °C at 760 mm/Hg
Completely soluble in water
Specific gravity (water=1)	1.23
Non combustible

- This article is considered stable under normal conditions
- Avoid overheating, Keep away from frost
- Incompatible with acid
- See Section 5

Toxicological information	No experimental data available.
Inhalation	Can cause damage to the respiratory system.
Contact with skin	Causes severe burns (R35).
Contact with eyes	Causes severe burns (R35).
Ingestion	The ingestion of significant quantities may cause burning sensation.The ingestion of significant quantities may cause damage to digestive system.
Carcinogenicity	No evidence of carcinogenic effects.

Ecotoxicity	"In general, this cleaning agent main ingredients will either dissolve rapidly and dissociate in water or are readily/inherently biodegradable." and Pollution Hazards approved this product for use as tank / hold cleaning agent by chemical tankers.
Mobility	Completely soluble in water
Persistence and Biodegradability	Its main ingredients will either dissolve rapidly and dissociate in water or are readily / inherently biodegradable.
Bioaccumulation Potential	Bioaccumulation of the components in this product is insignificant.
Other Adverse Effects	No environmental problems are expected when the product is used / handled correctly.

Classification	Pollution Hazards approved this product for use as tank / hold cleaning agent by chemical tankers.
Disposal considerations	"In general, this cleaning agent compatible to the environment, its main ingredients will either dissolve rapidly and dissociate in water or are readily/inherently biodegradable."

Proper Shipping Name		HYDROXIDE, SOLUTION
UN
	Proper Shipping Name	Potassium hydroxide, solution
	UN NO	1824
	Hazard Class	8	Packing Group	II
Road/Rail (ADR/RID)
	Proper Shipping Name	Potassium hydroxide, solution
	ADR UN No	1824
	ADR Hazard Class	8	Termcard	80S1824
Sear (IMDG)
	Proper Shipping Name	Potassium hydroxide, solution
	IMDG UN No	1824
	IMDG Hazard Class	8	IMDG Pack Group	II
	IMDG EmS	F-A, S-B	IMDG subrisk	NA
	IMDG Labels		IMDG Flash point	N/A
Air(ICAO/IATA)
	Proper Shipping Name	Potassium hydroxide, solution
	ICAO UnNo	1824
	ICAO Hazard Class	8	ICAO Packing Group	II
	ICAO subrisk	N/A	ICAO Labels	8, CAO
	ICAO Flash point	N/A
DOT/CFR(US Department of Transportation
	DOT Proper Shipping Name	Potassium hydroxide, solution
	Hazardous Material	Potassium hydroxide
	Hazard Class	8	Identification Number
	Product RQ (lbs)	3640	DOT subrisk	N/A
	DOTLabels	8	DOTFlashpoint	N/A

- Forbidden on passenger aircraft

Risk Phrases	Non Corrosive
Safety Phrases	In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.Wear suitable protective clothing, eye/face protection. In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).

(R35: Causes severe burns. R41: Risk of serious damage to eyes.) The information provided about the product on this Safety Data Sheet has
been compiled from knowledge of the individual constituents The data given here is based on current knowledge and experience. This Safety
Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties
The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications - usage
in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from manufacturer

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Classification	Pollution Hazards approved this product for use as tank / hold cleaning agent by chemical tankers.
Disposal considerations	"In general, this cleaning agent compatible to the environment, its main ingredients will either dissolve rapidly and dissociate in water or are readily/inherently biodegradable."

Aqua Clean Tuff High Foam

Removal of cargo residue:

Loose Rust & Paint Scale:

Cleanliness of cargo hold bilges :

Need a quote for this product?