Amonia
Category
MSDS
| Porduct Name | Ammonia Liquid |
| Part Number | RXSOL-10-1526-250 |
Company Details:....
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA
| Phone | +91 22 20871200 - 1400 |
| Fax | +91 22 27612100 :::AOH :0091 9821214367 |
| mail@rxmarine.com | |
| Website | www.rxmraine.com |
Mixtures
| Component | Classification | Concentration |
| Ammonia solution | ||
|
CAS-No. 1336-21-6
EC-No 215-647-6
Index-No. 007-001-01-2
Registration 01-2119488876-14-
number XXXX
|
Skin Corr. 1B; Eye Dam.
1; STOT SE 3; Aquatic
Acute 1; Aquatic Chronic
1; H314, H318, H335,
H400, H410
Concentration limits:
>= 5 %: STOT SE 3,
H335;
M-Factor - Aquatic Acute:
10
M-Factor - Aquatic
Chronic: 1
|
= 100 % |
For the full text of the H-Statements mentioned in this Section, see Section 16.
Classification of the substance or mixture
| Classification according to Regulation (EC) No 1272/2008 |
Skin corrosion (Sub-category 1B), H314
Serious eye damage (Category 1), H318
Specific target organ toxicity - single exposure (Category 3), Respiratory system, H335
Short-term (acute) aquatic hazard (Category 1), H400
Long-term (chronic) aquatic hazard (Category 2), H411
|
Label elements
| Signal Word | Danger |
|
Hazard Statements |
H314 Causes severe skin burns and eye damage.
H335 May cause respiratory irritation.
H410 Very toxic to aquatic life with long lasting effects.
|
|
Precautionary Statements |
P261 Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray.
P271 Use only outdoors or in a well-ventilated area.
P273 Avoid release to the environment.
P280 Wear protective gloves/ protective clothing/ eye protection/ face protection.
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing.
|
| Supplemental Hazard Statements | None |
| Other hazards |
This substance/mixture contains no components considered to be either persistent,
bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at
levels of 0.1% or higher.
Ecological information:
The substance/mixture does not contain components considered to have endocrine
disrupting properties according to REACH Article 57(f) or Commission Delegated regulation
(EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher.
Toxicological information:
The substance/mixture does not contain components considered to have endocrine
disrupting properties according to REACH Article 57(f) or Commission Delegated regulation
(EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher.
|
Description of first aid measures
| General advice | First aiders need to protect themselves. |
| If inhaled | After inhalation: fresh air. Call in physician. |
| In case of skin contact | In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. Call a physician immediately. |
| In case of eye contact | After eye contact: rinse out with plenty of water. Immediately call in ophthalmologist. Remove contact lenses. |
| If swallowed | After swallowing: make victim drink water (two glasses at most), avoid vomiting (risk of perforation). Call a physician immediately. Do not attempt to neutralise. |
| Most important symptoms and effects, both acute and delayed | The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 |
| Indication of any immediate medical attention and special treatment needed | No data available |
Extinguishing media
| Suitable extinguishing media | Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. |
| Unsuitable extinguishing media | For this substance/mixture no limitations of extinguishing agents are given. |
| Special hazards arising from the substance or mixture |
Highly flammable liquid and vapor. Runoff to sewer may create fire or explosion hazard.
In a fire or if heated, a pressure increase will occur and the container may burst, with the
risk of a subsequent explosion. The vapor/gas is heavier than air and will spread along
the ground. Vapors may accumulate in low or confined areas or travel a considerable
distance to a source of ignition and flash back.
Highly flammable liquid and vapor. Runoff to sewer may create fire or explosion hazard.
In a fire or if heated, a pressure increase will occur and the container may burst, with the
risk of a subsequent explosion. The vapor/gas is heavier than air and will spread along
the ground. Vapors may accumulate in low or confined areas or travel a considerable
distance to a source of ignition and flash back.
Highly flammable liquid and vapor. Runoff to sewer may create fire or explosion hazard.
In a fire or if heated, a pressure increase will occur and the container may burst, with the
risk of a subsequent explosion. The vapor/gas is heavier than air and will spread along
the ground. Vapors may accumulate in low or confined areas or travel a considerable
distance to a source of ignition and flash back.
Not combustible.
|
| Advice for firefighters |
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing. |
| Further information |
Prevent fire extinguishing water from contaminating surface water or the ground water system.
spray to keep fire-exposed containers cool.Promptly isolate the scene by removing all persons from the vicinity of the incident if
there is a fire. No action shall be taken involving any personal risk or without suitable
training. Move containers from fire area if this can be done without risk. Use water
spray to keep fire-exposed containers cool.
|
| Personal precautions, protective equipment and emergency procedures | Advice for non-emergency personnel: Avoid inhalation of dusts. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert. For personal protection see section 8. |
| Environmental precautions | Do not let product enter drains. |
| Methods and materials for containment and cleaning up | Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up dry. Dispose of properly. Clean up affected area. Avoid generation of dusts. |
| Reference to other sections | For disposal see section 13. |
Precautions for safe handling
| Advice on safe handling | Work under hood. Do not inhale substance/mixture. |
| Hygiene measures | Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance. For precautions see section 2.2. |
|
Conditions for safe storage, including any incompatibilities Storage conditions |
Tightly closed. Dry. |
| Storage class | Storage class (TRGS 510): 8A: Combustible, corrosive hazardous materials |
| Specific end use(s) | Apart from the uses mentioned in section 1.2 no other specific uses are stipulated |
Control parameters
Ingredients with workplace control parameters
Exposure controls
Personal protective equipment
| Eye/face protection | Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Tightly fitting safety goggles |
| Skin protection |
This recommendation applies only to the product stated in the safety data sheet,
supplied by us and for the designated use. When dissolving in or mixing with other
substances and under conditions deviating from those stated in EN 16523-1 please
contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell,
Internet: www.kcl.de).
Full contact
Material: Chloroprene
Minimum layer thickness: 0,65 mm
Break through time: 480 min
Material tested:KCL 720 Camapren®
This recommendation applies only to the product stated in the safety data sheet,
supplied by us and for the designated use. When dissolving in or mixing with other
substances and under conditions deviating from those stated in EN 16523-1 please
contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell,
Internet: www.kcl.de).
Splash contact
Material: Latex gloves
Minimum layer thickness: 0,6 mm
Break through time: 60 min
Material tested:Lapren® (KCL 706 / Aldrich Z677558, Size M). |
| Body Protection | Flame retardant antistatic protective clothing. |
| Respiratory protection |
Recommended Filter type: Filter A-(P3)
The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory
protective devices are carried out according to the instructions of the producer.
These measures have to be properly documented.
|
| Control of environmental exposure | Do not let product enter drains. |
| Physical state | Liquid |
| Colour | Colorless |
| Odor | Stinging |
| Melting point/freezing point | Melting point: -57,5 °C |
| Initial boiling point and boiling range | 37,7 °C at 1.013 hPa |
| Flammability (solid, gas) | No data available |
| Upper/lower flammability or explosive limits |
Upper explosion limit: 33,6 %(V)
Lower explosion limit: 15,4 %(V)
|
| Flash point | No data available |
| Autoignition temperature | No data available |
| Decomposition temperature | No data available |
| pH |
At 20 °C strongly alkaline
materials.Extremely flammable in the presence of the following materials or conditions: oxidizing
materials.
|
| Viscosity |
Viscosity, kinematic: No data available
Viscosity, dynamic: No data available
|
| Water solubility | At 20 °C soluble |
| Partition coefficient: n-octanol/water | log Pow: -1,38 - (anhydrous substance), (Lit.), Bioaccumulation is not expected. |
| Vapor pressure | 483 hPa at 20 °C |
| Density | 0,903 g/cm3 at 20 °C |
| Relative density | No data available |
| Relative vapor density | No data available |
| Particle characteristics | No data available |
| Explosive properties | Not classified as explosive. |
| Oxidizing properties | None |
| Other safety information | No data available |
| Reactivity | No data available |
| Chemical stability | Ammonia solution itself is not flammable, but can form an ignitable ammonia/air-mixture by outgassing. |
| Possibility of hazardous reactions |
A risk of explosion and/or of toxic gas formation exists with the following substances:
Oxidizing agents
Mercury
Oxygen
silver compounds
nitrogen trichloride
hydrogen peroxide
silver
antimony hydride
Halogens
Acids
Calcium
Chlorine
Chlorites
auric salts
perchlorates
sodium hypochlorite
mercury compounds
halogen oxides
Heavy metals
Heavy metal salts
Acid chlorides
Acid anhydrides
Risk of ignition or formation of inflammable gases or vapours with:
Boranes
Boron
Oxides of phosphorus
Nitric acid
silicon compounds
chromium(VI) oxide
chromyl chloride
Exothermic reaction with:
Acetaldehyde
Acrolein
Barium
boron compounds
Bromine
halogen-halogen compounds
hydrogen bromide
silane
Hydrogen chloride gas
halogen compounds
dimethylsulfate
nitrogen oxides
Fluorine
Hydrogen fluoride
chlorates
carbon dioxide
Ethylene oxide
polymerisable
|
| Conditions to avoid | Heating |
| Incompatible materials |
Aluminum, Lead, Nickel, silver, Zinc, Copper, metal alloys, various metals
|
| Hazardous decomposition products | In the event of fire: see section 5 |
Information on toxicological effects
| Acute toxicity |
LD50 Oral - Rat - male - 207,0 mg/kg
Remarks: Sense Organs and Special Senses (Nose, Eye, Ear, and Taste):Olfaction:Other
changes.
Behavioral:Convulsions or effect on seizure threshold.
Gastrointestinal:Ulceration or bleeding from stomach.
(ECHA)
Symptoms: If ingested, severe burns of the mouth and throat, as well as a danger of
perforation of the esophagus and the stomach.
Acute toxicity estimate Oral - 207 mg/kg
(ATE value derived from LD50/LC50 value)
LC50 Inhalation - Rat - 1 h - > 710 mg/m3
Remarks: (RTECS)
LD50 Dermal - Rabbit - 301,0 mg/kg
Remarks: Behavioral:Tremor.
Gastrointestinal:Changes in structure or function of salivary glands.
Kidney, Ureter, Bladder:Other changes.
(ECHA)
Acute toxicity estimate Dermal - 301 mg/kg
(ATE value derived from LD50/LC50 value) |
| Skin corrosion/irritation |
Skin - Rabbit
Result: Causes burns.
Remarks: (ECHA)
|
| sensitization | Not available |
| mutagenicity | Not available |
| Carcinogenicity | Not available |
| Reproductive toxicity |
Not available
|
| Teratogenicity | Not available |
| Specific target organ toxicity (single exposure) | Not available. |
| Specific target organ toxicity (repeated exposure) | Not available. |
| Aspiration hazard | Not available. |
| Information on the likely routes of exposure | Not available. |
| Persistence and degradability | No data available |
| Toxicity to fish | Static test LC50 - Oncorhynchus mykiss (rainbow trout) - 75 mg/l - 96 h (OECD Test Guideline 203) |
| Toxicity to daphnia and other aquatic invertebrates | Static test EC50 - Daphnia magna (Water flea) - 42,81 mg/l - 48 h (OECD Test Guideline 202) Remarks: (in analogy to similar products) The value is given in analogy to the following substances: maleic acid |
| Toxicity | Toxicity to fish LC50 - Pimephales promelas (fathead minnow) - 1.520 mg/l - 96 h |
| Toxicity to bacteria | EC10 - Bacteria - 14 mg/l - 72 h Remarks: (Lit.) EC5 - E.coli - 15.000 mg/l Remarks: (Lit.) (maximum permissible toxic concentration) |
| Toxicity to algae | Static test ErC50 - Pseudokirchneriella subcapitata (green algae) - 74,35 mg/l - 72 h (OECD Test Guideline 201) Remarks: (in analogy to similar products) The value is given in analogy to the following substances: maleic acid |
| Products Biodegradation | The methods for determining the biological degradability are not applicable to inorganic substances. |
| Mobility in soil | No data available |
| Results of PBT and vPvB assessment | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
| Endocrine disrupting properties | No data available |
| Other adverse effects | No data available . |
| Product | Offer surplus and non-recyclable solutions to a licensed disposal company. Waste material must be disposed of in accordance with the Directive on waste 2008/98/EC as well as other national and local regulations. Leave chemicals in original containers. No mixing with other waste. Handle uncleaned containers like the product itself. |
| Contaminated packaging | Dispose of as unused product. |
| Waste treatment Method | See www.retrologistik.com for processes regarding the return of chemicals and containers, or contact us there if you have further questions. |
| UN number | ADR/RID:2672 IMDG:2672 IATA: 2672 |
| UN proper shipping name |
ADR/RID: AMMONIA SOLUTION
IMDG: AMMONIA SOLUTION
IATA: Ammonia solution |
| Transport hazard class(es) | ADR/RID: 8 IMDG: 8 IATA:8 |
| Packaging group | ADR/RID: IIl IMDG: lII IATA:IIl |
| Environmental hazards | ADR/RID: No IMDG: No IATA: No |
| Special precautions for user | No data available |
| Further information | Not classified as dangerous in the meaning of transport regulations. |
| Safety, health and environmental regulations/legislation specific for the substance or mixture | This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006. |
| Other regulations | Observe work restrictions regarding maternity protection in accordance to Dir 92/85/EEC or stricter national regulations where applicable. Take note of Dir 94/33/EC on the protection of young people at work. |
| Chemical Safety Assessment | For this product a chemical safety assessment was not carried out |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |