Its wide range of usage is in water treatment, because it can act as an coagulant, flocculant, precipitant and emulsion breaker. As coagulant and flocculant, aluminum sulfate successfully removes turbidity, suspended solids and colloidal color,reduces biochemical oxygen demand (BOD) and extremely clarifies potable, process and wastewaters.
Also used as foam fire extinguisher
Aluminium sulfate reacts with sodium bicarbonate to which foam stabilizer has been added, producing carbon dioxide for fire extinguishing foam.
The carbon dioxide is trapped by the foam stabilizer and creates a thick foam which will float on top of hydrocarbon fuels and seal off access to atmospheric oxygen, smothering the fire. Chemical foam was unsuitable for use on polar solvents such as alcohol, as the fuel would mix with and break down the foam blanket. The carbon dioxide generated also served to propel the foam out of the container, be it a portable fire extinguisher or fixed installation using hoselines. Chemical foam is considered obsolete in the United States and has been replaced by synthetic mechanical foams, such as AFFF which have a longer shelf life, are more effective, and more versatile, although some countries such as Japan and India continue to use it.
In the construction industry, it is used as waterproofing agent and accelerator in concrete.
- For the production of Aluminum salts, Soaps and Aluminum Hydroxide Gel. - As a Catalyst in Ethane Production.
- Textile industry.
- Paper production.
- For the production of Glycerin
- As a Foaming Agent in Fiber Foams.
- As a Clearing Agent for Fats and Foams. - In sugar industry.
|
Item |
Index |
|
|
Aluminum Sulfate |
15.8% |
17% |
|
A12O3 % ≥ |
15.8 |
17 |
|
Iron Fe content % ≤ |
0.50 |
0.005 |
|
Water insoluble matter % ≤ |
0.15 |
0.15 |
|
PH value 1% aqueous solution ≥ |
3.0 |
3.0 |
|
Heavy metals as Pb % ≤ |
0.002 |
0.002 |
|
AS % ≤ |
0.0005 |
0.0005 |
|
Granularity ≥ |
----- |
15 |
|
Item |
Index |
|
|
Aluminum Sulfate |
15.8% |
17% |
|
A12O3 % ≥ |
15.8 |
17 |
|
Iron Fe content % ≤ |
0.50 |
0.005 |
|
Water insoluble matter % ≤ |
0.15 |
0.15 |
|
PH value 1% aqueous solution ≥ |
3.0 |
3.0 |
|
Heavy metals as Pb % ≤ |
0.002 |
0.002 |
|
AS % ≤ |
0.0005 |
0.0005 |
|
Granularity ≥ |
----- |
15 |
|
Item |
Index |
|
|
Aluminum Sulfate |
15.8% |
17% |
|
A12O3 % ≥ |
15.8 |
17 |
|
Iron Fe content % ≤ |
0.50 |
0.005 |
|
Water insoluble matter % ≤ |
0.15 |
0.15 |
|
PH value 1% aqueous solution ≥ |
3.0 |
3.0 |
|
Heavy metals as Pb % ≤ |
0.002 |
0.002 |
|
AS % ≤ |
0.0005 |
0.0005 |
|
Granularity ≥ |
----- |
15 |
properties :::---
1. Properties: Including anhydrous and hydrous(18 crystal water) type. Usually, the crystal separated out from aqueous solution at the normal temperature is A12(SO4) 3.18H2O; When weathering, the average molecular structure is A12(SO4) 3.14H2O, may appear white powdery, with bright flake or crystalline flakelet, odorless, to change the taste from sweetness to slight astringency.
2. Uses: Solidifying agent ( to purify grease and water ) and stabilizer in pasteurization of albumin ( including: liquid or refrigerated whole egg, egg white or egg yolk ), the maximum allowable use level ( FAO/WHO.1984 ) is 0.036%.
3. Standard: HG2225-2001
4. State: Flake or powder
5. Packing: 25/50 kg/bag, 25MT/20'FCL
ALUMINIUM SULFATE Al2(SO4)3
| Product Name | RXSOL-19-1904 |
| Product Type | ALUMINUM SULFATE |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Muscat, Fujairah, Kandla, Kolkata, Chennai, Vizag
| Phone | +91 22 27815540 / 41 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |
|
Chemical Name |
CAS Number |
EINECS number |
RTECS number |
|
ALUMINUM SULFATE |
16 828 – 12 – 9 |
229-912-9 |
BD 17 00000 |
|
Odour |
Odorless |
|
Appearance |
white / off – white |
|
Contact with eyes |
Causes irritation. |
|
Contact with skin |
Causes irritation. |
|
Contact with skin |
Irritant In case of contact, immediately flush skin with plenty of water.Cover the irritated skin with an emollient.Remove contaminated clothing and shoes.Cold water may be used.Wash clothing before reuse.Thoroughly clean shoes before reuse.Get medical attention |
|
Contact with eyes |
Check for and remove any contact lenses.In case of contact, immediately flush eyes with plenty of water for at least 15 minutes.Cold water may be used.Get medical attention |
|
Ingestion |
Never give anything by mouth to anunconscious person . Give plenty of water to drink . Obtain immediate medical attention |
|
Inhalation |
If inhaled, remove to fresh air.If not breathing, give artificial respiration.If breathing is difficult, give oxygen.Get medical attention |
|
Fire-fighting measures |
Use suitable personal protective / safety equipment.In fire conditions, fire - fighters should wear an appropriate mask or a selfcontaining breathing apparatus
|
|
Personal Precautions |
Use appropriate protective clothing |
|
Environmental Precautions |
Do not let product enter drains, use suitable absorbing granules or liquid – absorbent material and sweep up. |
|
Handling |
Handle in accordance with good industrial hygiene and safety practice |
|
Storage |
Product is mildly hygroscopic and should therefore be stored in tightly closed containers in a cool, dry and well – ventilated area away from moisture |
|
Ventilation |
Can be used to control dust exposure but may require emission controls. |
|
Respiratory protection |
Select respirator based upon its suitability tob provide adequate worker protection for given working conditions, level of airborne contamination, and presence of sufficient oxygen. |
|
Personal protection |
Wear protective gloves, boots, long pants and long sleeve shirts to prevent prolonged or repeated skin contact.Recommended protective materials – neoprene, PVC, Vinyl or rubber.Never use leather. |
Gloves Goggles Suit No_Smoking
|
Apperance |
white / off – white |
|
Odor |
odorless |
|
pH |
slightly acidic |
|
Molecular weight |
594.4 g/mole |
|
Boiling point |
NA |
|
Melting point |
86oC |
|
Vapor pressure |
negligible as solid |
|
Density (20oC) |
1700 ±10 kg/m3 |
|
Flash point |
NA |
Stability :- The product is stable under ordinary conditions of use and storage
Conditions to avoid:- Avoid contact with mineral acids, excessive heat and strong bases / alkalis, such as NaOH, moisture and incompatibles.
Corrosive to metals (carbon steel, aluminum, brasses) in the presence of water. Incompatible with carbon and nylon as well.
Other toxic effects on humans:-Very hazardous in case of eye contact(irritant).Hazardous in case of skin contact (irritant).Slightly hazardous
in case of inhalation (lung irritant).
Chronic effect on humans :- There are no known effects from chronic exposure to this product.Target organs. None known.
Toxicity of the productsof biodegradation:- The products itself and its products of degradation are not toxic.
biodegradation:- Possibly hazardous short term degradation products are not likely.However, long term degradation products may arise.
Waste disposal:- Dispose of in accordance with federal, state and local environmental laws
Text of R and S phrase codes used in this safety data sheet:- R34: Causes burns; R36: Irritating to eyes; R37: Irritating to respiratory system; R41: Risk of serious damage to eyes. The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications - usage in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from manufacturer
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable..