Aluminium hydroxide Alumina Hydrate Manufacturer, Supplier and Exporter.
Aluminium Hydroxide or ATH is used in manufacturing of many inorganic chemicals like: Non – Ferric Alum, Poly Aluminium chloride, Aluminium Fluoride, Sodium Aluminate, Catalysts, Glass etc.
|
Specification of Aluminium Hydroxide |
|
|
Physical State |
Odorless White Powder |
|
Melting Point |
300 degreeC |
|
Specific Gravity |
2.42 |
|
Solubility In Water |
Insoluble |
|
pH |
Weak Basic |
|
Vapor Density |
Autoignition |
|
NFPA Ratings |
Health: 1; Flammability: 0; Reactivity: 0 |
|
Refractive Index |
Flash Point Not Considered To Be A Fire Hazard |
|
Al(OH)3 |
99.5% Min |
|
Al2O3 |
64.0% Min |
|
SiO2 |
0.015% Max |
|
Fe2O3 |
0.02% Max |
|
Moisture |
0.3% Max |
|
Loss On Ignition |
34.0 - 35.0% |
|
Whiteness |
96% Min |
|
Particle Shape |
Platelet, Pseudo-Hexagonal |
|
Average Particle Size |
1 - 2 Microns |
Aluminium Hydroxide Particle Size And Appearance: Odorless White Crystals/ Powder
| Product Code | RXSOL-40-6151-050 |
| Product Name | Aluminum Hydroxide |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Kolkata, Chennai, Visakhapatnam, FUjairah, Muscat, Nairobi
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |
| INGREDIENTS | CAS no |
EC-No. |
|
Aluminium hydroxide |
21645-51-2 |
244-492-7 |
| Skin contact |
irritant |
| Eye contact | irritant |
|
inhaled |
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician |
|
swallowed |
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. |
|
Swallowed |
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. |
|
Inhaled |
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician |
|
Skin contact |
Wash off with soap and plenty of water. Consult a physician |
|
Eye contact |
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician |
|
Suitable extinguishing media |
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. |
|
Advice for firefighters |
Wear self contained breathing apparatus for fire fighting if necessary. |
|
Personal precautions |
Wear respiratory protection. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. |
|
Environmental precautions |
Do not let product enter drains. |
|
Methods and materials for containment and cleaning up |
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers for disposal |
|
Precautions for safe handling |
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire protection. |
|
Conditions for safe storage, including any incompatibilities |
Store in cool place. Keep container tightly closed in a dry and well-ventilated place. |
|
engineering controls |
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday |
|
Eye/face protection |
Use equipment for eye protection tested and approved under appropriate government standerd
|
|
Skin protection |
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. |
|
Appearance |
Powder |
|
Odour |
NA |
|
pH |
NA |
|
Melting point/freezing point |
NA |
|
Flash point |
NA |
|
Vapour pressure |
NA |
|
Relative density |
NA |
|
Water solubility |
NA |
Reactivity :- N/A
Chemical stability :- N/A
Incompatible materials :- Strong acids
|
Skin |
May be harmful if absorbed through skin. May cause skin irritation. |
|
Eyes |
may cause eye irritation |
|
Inhalation |
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician |
|
Toxicity |
NA |
|
Bioaccumulative potential |
N/A |
|
Persistence and degradability |
NA |
|
Mobility in soil |
NA |
Waste treatment methods
Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed professional waste disposal service to
dispose of this material. Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an
afterburner and scrubber.
Contaminated packaging : Dispose of as unused product.
N/A
REGULATORY INFORMATION
This safety datasheet complies with the requirements of Regulation
Safety, health and environmental regulations/legislation specific for the substance or mixture
N/A
The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.