WHITEX Bleach Liq

Placeholder

WHITEX Bleach Liq

Bleach substitute is also an oxidizer

Compare
SKU: RXSOL-15-1500-005 Category:

Bleach substitute is also an oxidizer .

Today, bleach is found in nearly every household. It whitens fabrics and removes stains by a chemical reaction that breaks down the undesired color into smaller particles that can be easily removed by washing. This is more common form of household bleach . It is most effective in removing stains and disinfecting fabrics. Very effective in both warm and hot wash temperatures.

The disinfecting properties of chlorine bleach can also be useful outside the laundry. Chlorine bleach disinfects drinking water where groundwater contamination has occurred, as it is a powerful germicide. 

EXPORT Inquiry ::: 123@rxmarine.com 

capacity ::: 20 Mt Every Day

Stock Available :::  FUJAIRAH – DUBAI – MUMBAI – KANDLA – KOLKATA – CHENNAI – SURAT

 

Technical Bulletin

Bleaching Liq

RXSOL-15-1500

Description :
Bleach substitute is also an oxidizer.

Today, bleach is found in nearly every household. It whitens fabrics and removes stains by a chemical reaction that breaks down the undesired color into smaller particles that can be easily removed by washing. This is more common form of household bleach . It is most effective in removing stains and disinfecting fabrics. Very effective in both warm and hot wash temperatures.

*These products become more aggressive with temperature increase, and should not be allowed to dry on tank walls or stored in cargo tanks as cleaning solution or slops.

Bleach will 
– Remove odors.
– Remove color.
– Improve permanganate time.

Technical Specification :::

Bleach will -Bleach will –
– Remove odors.
– Remove color.
– Improve permanganate time.
 
Boiling Point …………………………………………………………………. (for component) 212.0 F (100.0 C)  
Vapor Pressure  …………………………………………………………….. (for component) 17.500 mmHg   
Specific Vapor Density ……………………………………………………. No data    
Specific Gravity ……………………………………………………………… 1.220 – 1.250 @ 68.00 F 
Liquid Density ……………………………………………………………….. 10.400 lbs/gal @ 68.00 F 1.250 kg/l @ 20.00 C   
Percent Volatiles …………………………………………………………….  87.5%  
Evaporation Rate ……………………………………………………………. SLOWER THAN ETHYL ETHER   
Appearance …………………………………………………………………… No data   
State …………………………………………………………………………….. LIQUID   
Physical Form ………………………………………………………………… HOMOGENEOUS SOLUTION  
Color …………………………………………………………………………….. CLEAR TO YELLOW LIQUID    
Odor ……………………………………………………………………………… CHLORINATED BLEACH ODOR  
pH ………………………………………………………………………………… 13.5    
Solubility in Water ……………………………………………………………. SOLUBLE- Remove odors.
– Remove color.
– Improve permanganate time.
 
Boiling Point …………………………………………………………………. (for component) 212.0 F (100.0 C)  
Vapor Pressure  …………………………………………………………….. (for component) 17.500 mmHg   
Specific Vapor Density …………………………………………………….. No data    
Specific Gravity ………………………………………………………………. 1.220 – 1.250 @ 68.00 F 
Liquid Density ………………………………………………………………… 10.400 lbs/gal @ 68.00 F 1.250 kg/l @ 20.00 C   
Percent Volatiles …………………………………………………………….  87.5%  
Evaporation Rate …………………………………………………………….. SLOWER THAN ETHYL ETHER   
Appearance …………………………………………………………………… No data   
State ……………………………………………………………………………. LIQUID   
Physical Form ………………………………………………………………… HOMOGENEOUS SOLUTION  
Color ……………………………………………………………………………. CLEAR TO YELLOW LIQUID    
Odor …………………………………………………………………………….. CHLORINATED BLEACH ODOR  
pH ……………………………………………………………………………….. 13.5    
Solubility in Water ……………………………………………………………. SOLUBLE

 

TANK WASHING PROCEDURE :::

Spraying :
Following rough washing to a good Water White or better, apply dilute Bleach to 1 – 3% strength.  First wet the tank surface (spray with DI water), then spray all over with Bleach, wait 30 minute (but do not allow to dry) and then rinse very well with DI water, including the tank top towards the sump.  To ensure that you have covered all areas properly, this process should be carried out at least twice with good DI water.

Injection : no.

Re-circulation :
Following rough washing  to a good Water White standard or better, apply dilute Bleach to 1-3% strength.  Mix sufficient Bleach with fresh water in the tank and heat this mixture to 40 – 50 0 C, circulate through the drop line if fitted and than circulate through butterworth machine for 3 hours.  After re-circulation immediately warm butterworth to (500 C) the tank for 3 hours at maximum pressure, increase the water temperature to 80-85 o C after 45 minutes.  Check (by smell) that there is no Bleach remaining, then fresh water rinse and dry.

* When there are a number of tanks requiring re-circulation, it may be significantly more efficient to make up a
   large batch or number of batches that can be transferred on between  tanks as required.
* Use a strainer at the pump stack when circulating any solution.
  Tank Lining – Stainless / Zinc / Epoxy / Phenolic (Extreme care must be taken if product other than bleach
  substitute is to be used in any coated space).

 

Product Label

Today, bleach is found in nearly every household. It whitens fabrics and removes stains by a chemical reaction that breaks down the undesired color into smaller particles that can be easily removed by washing. This is more common form of household bleach . It is most effective in removing stains and disinfecting fabrics. Very effective in both warm and hot wash temperatures.

 

How Can we Help You
Send via WhatsApp

Enter your keyword