Description : 

A blend of phosphonate, and polymers incorporating dispersants. It is designed for the prevention of hardness deposition in recirculating or once through cooling systems using moderate to high hardness make-up water . Rxsol Scale and Corrosion Inhibitor  is scientifically formulated from a combination of polymers to offer excellent calcium  along with general scale inhibition in cooling water systems, even under extreme system conditions. Rxsol Scale and Corrosion Inhibitor  is made up of halogen stable polymers that do not form insoluble calcium salts when added to hard waters.

Application : 

Rxsol Scale and Corrosion Inhibitor is halogen stable and can be used with oxidising biocide programmes. The product retards metal oxide formation, and passivates precipitation zones by dispersion.

Dose : 

The target dosage range is 3 – 5 ppm as PO4-3 in the recirculating cooling water.

Dosage Strategy

Rxsol Scale and Corrosion Inhibitor  should be fed continuously to an area of good mixing. The product may be fed directly or may be diluted with good quality water and fed from a chemical dosing tank.

Performance Monitoring

Appropriate use of Rxsol Scale and Corrosion Inhibitor   following the above dosing strategy should result in a corrosion rate of less than 2 mpy.

Test Methods

Phosphonate Drop test – Thorium Nitrate titration
Phosphonate UV photolysis + colour disc

Physical Proerties

Handling : Do not breathe vapours or spray mist. Avoid contact with skin and eyes. . Provide sufficient air exchange and/or exhaust in work rooms. Avoid exceeding of the given occupational exposure limits. Smoking, eating and drinking should be prohibited in the application area. Normal measures for preventive fire protection.

Storage : Store in original container. Keep containers tightly closed in a dry, cool and well-ventilated place. Stable under recommended storage conditions. Protect from frost.