Paint stripper or paint remover or paint cleaner to quickly and effectively remove a wide range of finishes from the metal surfaces of automobiles, trucks
RXSOL Professional Paint removers are essential to removal of paint chemical stripping of lead based paint.
Extremely effective, non-methylene chloride paint stripper. Biodegradable, non-
Shop Paint Stripper for door delivery through our email and save 50% discount.
RXSOL group is real Paint Remover manufacturers and Paint Remover suppliers in Mumbai, Gujrat, Andhra, Tamilnadu, Kolkata, Middle East, Dubai. Our company listed as Paint Remover producers and Paint Remover exporters.
This paint remover can be treated as All Purpose Paint Remover and classified as best paint remover for metal, best paint remover for cars, Aircraft Paint Remover, best wall paint remover and can be use as spray paint remover.
Technical Bulletin
PAINT-REMOVER (RXSOL-18-1013-05)
Introduction:- Exciting product treated for the really tough , Paints cleaning problems faced in the proper maintences of Industrials & Institutional physical plants.
Fields:-To remove Paint, Varnish, Lacquer, Baked, Enamel, Shellac, and EPOXY in Shipping Industries, Workshop, Paints Shop,Garages from all metallic surfaces.
Note:-This Paint–Remover (RXSOL-18-1013-05) particularly used in aircraft- industry because of its non-reactivity with Aluminium , Copper , Brass and their Alloys .
Composition:- RXSOL-18-1013-05 is a special blend of advanced Organic corrosion protection components with various organic solvents & penetrating agents. RXSOL-18-1013-05 functions via a unique dual mechanism the penetrating agent reacts with paints components whilst the organic components reacts with metals to form protection film.
Applications, Dossage & Control:-
Dip-Cleaning:- Small parts maybe dipped in an open bucket or tank containing RXSOL-18-1013-05 removed and either wiped dry with a rag or blown dry air. Agitation will facilitate cleaning,but violent agitation such as with air should be avoided since this will increases loss of RXSOL-18-1013-05 evaporation. After use,the cleaning tank should be covered or the solution put into a suitable container for reuse. Solvent resistant gloves should be worn during the dip operation.
Wiping/Brushing:-Large components may be wiped down with rags,sponges or brushes soaked in RXSOL-18-1013-05
NOTE :::
The condition of metal surface is a vital factor affecting paint adhesion—the greater the surface, the better the adhesion of the coating. The increased area resulting from sandblasting, etched surface, porous castings and from conversion coatings have added to the difficulty of paint removal. Not only do these conversion coatings increase the surface area of the metal, but the porous nature of the inorganic film enables the paint to penetrate into the crevices and form a deep-rooted and firmly bound bond with the surface. The increased surface and the penetration of the paint into the porous inorganic film retards the stripping operation. Using the same paint and the same stripper, the coating on an untreated surface will wrinkle and lift away rapidly in large sheets. On the other hand, the stripping time of the piece having a conversion coating is greatly increased,- and the appearance of the stripped paint coat is considerably altered. Instead of the customary large sheets of paint and a clean surface, the coatings from phosphated, chromatized or anodized work, break away in small uneven pieces, leaving much of the paint coat still clinging to the metal.
Heavily pigmented coatings affect the efficiency of the stripper. The high pigment content plus the density of the pigment retard the solvent stripper from penetrating through the coating to the base metal to break the bond between the metal and the coating. Such coatings are usually found on refrigerators, washing machines, etc., where high chemical and moisture resistance are desirable. The stripping time for these coatings is considerably greater than a coating coning the same resin with a lower pigment content.
Product Label
RXSOL-18-1013 is a excellent product for removal of paint from tough painted surfaces. Useful in the maintenance of all types of Industrial plant and in the marine industry. The condition of metal surface is a vital factor affecting paint adhesion—the greater the surface, the better the adhesion of the coating. The increased area resulting from sandblasting, etched surface, porous castings and from conversion coatings have added to the difficulty of paint removal. Not only do these conversion coatings increase the surface area of the metal, but the porous nature of the inorganic film enables the paint to penetrate into the crevices and form a deep-rooted and firmly bound bond with the surface. The increased surface and the penetration of the paint into the porous inorganic film retards the stripping operation. Using the same paint and the same stripper, the coating on an untreated surface will wrinkle and lift away rapidly in large sheets. On the other hand, the stripping time of the piece having a conversion coating is greatly increased,- and the appearance of the stripped paint coat is considerably altered. Instead of the customary large sheets of paint and a clean surface, the coatings from phosphated, chromatized or anodized work, break away in small uneven pieces, leaving much of the paint coat still clinging to the metal.
