The RXSOL-17-1058-025 is the new, 3rdgeneration dispersant which is the latest water and Surface Active Agent based formulation oil spill dispersant with no flash point, non toxic and free from petroleum distillate and soluble in sea or fresh water.use as Type II . It can be used concentrated or diluted to a ratio of 1:10 depending on the contamination level. It is an efficient and environmental friendly product containing no hydrocarbons. It has been specifically designed for oil dispersion at sea, it can be applied by spray from booms on work boats, hand sprayers or hoses using an injector.
This product is specially designed for complete emulsification of oil by which subsequent dispersion takes place.
Technical Bulletin
OIL SPILL DISPERSANT TYPE – II
RXSOL-17-1058-025
Product Description :-
RXSOL-17-1058-025Emulsifier based product with excellence efficiency and low toxicity with superior penetrating & surface active agents . This product is specially designed for complete emulsification of oil by which dispersion takes place AREA : At SEA , at shore either in port or off board , FOR INDUSTRIAL PURPOSE.
PROCEDURE-OF-USE :-
OIL-SPILLS-AT-SEA :-
Rxsol OD1012 is used concentrated by direct spraying to clean up oil spills at sea.It can be applie by hand spray, work boats with mounted spray booms,or fire hoses with injectors. Allow some time for the oil to absorb the RXSOL-17-1058-025 & then disperse mixture by vigorous agitation using Fire hoses,Ship’s propeller, Breaker boards towed behind work boats ,etc
OIL-ON-BEACHES-AND-SHORE-LINE :-
RXSOL-17-1058-025 should be applied neat by spraying over oiled areas. Allow time for the oil to absorb the DISPERSANT then follow by washing down the beach or rocks, etc. The treatment rate depends on the nature and thickness of the oil spill, also on the age and condition. Under conditions where it is a thin slick of oil, 1 litre of RxsolOD1012 WB is enough to treat approximately 20-30 Sq.M of oil. In many cases, several applications may be necessary. (Depends on the size of contamination in the affected area)
OIL-SPILL-ON-DECK :-
Remove as much of the oil as possible, then spray RXSOL-17-1058-025 over area covered by the oil & allow some time for it to be absorbed. Disperse the mixture with water by means of a fire hose Depending on type of oil it may be necessary to use several applications.
Product Properties :-
| Appearance | Amber liquid / Low viscous | |
| Odor | Aromatic | |
| Density | In g/cm3 at 15°C: 1.00 | NOTE : SHELF LIFE 5 YEARS |
| Flash point | MATERIALS BOILS AT 68°C | EFFICIENCY |
| Compatibility | A . SEA WATER 68% | |
| Metal | No known effect | B.FRESH WATER 78% |
| Rubber | AVOID | STABILITY |
| Synthetic rubber | May swell | A .SEA WATER 97.5 % |
| pH | 7 +0.5 B | FRESH WATER 98.8 % |
| Packging | Order No.:RXSOL-17-1012-OD-B | Size (in litres) |
| 25 , 30 , 210 | ||
| TOXICITY LC50 ( After 96 hours ) | IN CONCENTRATE 4460 PPM SLIGHT TOXIC. | IN DILUTE 9800 PPM PRACTICALLY NON TOXIC |
Characteristics :
Biodegradable and having low toxicity . Self –life 5 YEARS( FROM MANUFACTURING DATE ) HIGH – EMULSIFICATION rate Converts hydrocarbons particle in to very fine emulsions.Ready to use product. Suitable for Crude / Bitumen / Residual / Diesel / Kerosene, White spirit & Lube oils etc.Effective on oil spills at platefoprm, during loading or discharging of cargo or bunkers .For cleaning of spills on Deck, Ships side, Piers, Wharfs, etc. where allowed.
Product Label
Surface Active Agent based formulation oil spill dispersant with no flash point, non toxic and free from petroleum distillate and soluble in sea or fresh water.use as Type II . It can be used concentrated or diluted to a ratio of 1:10 depending on the contamination level. It is an efficient and environmental friendly product containing no hydrocarbons. It has been specifically designed for oil dispersion at sea, it can be applied by spray from booms on work boats, hand sprayers
