Specialize developed formulation to dissociate bonding of lube oil additive from surface of tank. This product is prinicipally developed to make LUBE additive water soluble as well as depolymerise action of base product.
Technical Bulletin
Discription :::
Specialize developed formulation to dissociate bonding of lube oil additive from surface of tank. This product is prinicipally developed to make LUBE additive water soluble as well as depolymerise action of base product.
Lube Additives 1 ( Soluble in light Base oil and Gas oil )
Wide range of different types of additives for Luboil and Gas oil. In this category we kept light products with low viscosity until dark products with very high viscosity, which are Soluble in light Base oil and Gas oil.
B. Butter worth the tank 2 hours with hot seawater or freshwater (70-80°C).
C . Prepare the following cleaning solution in freshwater or seawater: 0.4 % RXSOL-20-2043-201 Butter worth the tank 1, 5 to 2, 0 hours by recirculation. The temperature should be approx. 70°C.The temperature can be achieved/maintained by means of heating coils, or going via t he Butter worth heater. Depending on the amount of cargo residues the solution can be used for 1 to 3 tanks.
D. Rinse the tank with fresh water.
E. Ventilate, mop and dry the tank.
Lube Additives 2
In this category of Lube Additives a pre-cleaning with base oil or gas oil is not necessary
A. PRE-CLEANING – Pre-wash the tank with freshwater of a warm to moderate temperature. Butterworth the tank 1 hour with seawater or freshwater of a moderate temperature. Then Butterworth the tank 1 hour with hot seawater or freshwater (70- 80°C).
B. Prepare the following cleaning solution in freshwater or seawater 0.4 % RXSOL-20-2043-201 Butter worth the tank 1, 5 hours by recirculation with a temperature of approx. 70°C.The necessarytemperature can be achieved/maintained by means of heating coils or going via the Butterworth heater. Depending on the amount of cargo residues the solution can be used for 1 to 3 tanks.
C. Rinse the tank with fresh water.
D. Ventilate, mop and dry the tank.
Further Cleaning Suggestions:
-
For some Lube Additives a pre-cleaning with base oil or gas oil is not necessary. After butter Worthing with warm/ moderate water followed by hot water the residues can be removed by recirculation of a solution of 0, 4 % RXSOL-20-2043-201 or by injection of the RXSOL-20-2043-201 into the Butter worth system during the hot wash… The suitability of the RXSOL-20-2043-201 solution for the
Lube Additive in question can be easily pre-tested in a glass bottle. -
Some Lub Additives with higher viscosity can be removed by recirculation of a solution of 0.4% RXSOL-20-2043-201 and 5%
RXSOL AL 2005. - Residues of Lube Additives can be sprayed and manually removed with undiluted RXSOL AL 2005.
- Residues of Lube Additives can be as well sprayed and manually removed by a gas oil.
Product Label
Specialize developed formulation to dissociate bonding of lube oil additive from surface of tank. This product is prinicipally developed to make LUBE additive water soluble as well as depolymerise action of base product.
