ACC PLUS is a highly concentrated organic solvent based emulsion cleaner. We are One of popular ACC PLUS supplier and exporter. Uses of ACC PLU renders surfaces oil repellent. Maintains and stabilizer air cooler efficiency at maximum. Saves time, maintenance cost and avoids risks of damage when dismantiling. No harmful effect on engine. Product in water solution is non-flammable and non-explosive. It can also be used for removal of light carbon from machinery parts.

Technical Bulletin

Air Cooler Cleaner Plus

Cleaner for Air Coolers and Turbo

RXSOL-16-1039-020

Product Description :
RXSOL-16-1039-020 is a concentrate solvent emulsion cleaner for cleaning of Air coolers, Scavenging air systems and turbochargers of diesel engine.

Procedure of Use :
In-service cleaning–RXSOL-16-1039-020 is  passes through the air trunking upstream of the charge aircooler, followed by a clean water rinse.For cleaning of air coolers, it is necessary to use correctly  installed  dosing  and  injection system.

Dose :
3 to 5 litres of cleaning solution per square meter or as table below:

Note:
For cleaning of Air cooler and Air side of  turbochargers, a  solution  of  5 – 25% RXSOL-16-1039-020 in fresh  water is recommended. Inject the solution for 10-15minutes, then similar quantity of fresh water injected to rinse off emulsifieddeposits.

Hand spray Cleaning:-
By Hand spray,apply concentrate RXSOL-16-1039-020 all over the cooler coils. for good emulsificati -on & penetration. Allow the RXSOL-16-1039-020 for a minimum of 1 hour,then use a high pressu ure  water to wash  off  the  loosened deposits. During process  always  keep drain valve  open. After satisfactory cleaning, and flushing through with fresh water, close air cooler drains.Note that during this process the engine must be stopped.

Soak method :
Machine parts with stubborn carbon deposits to be cleaned is dipped into conc.Soln.of ACC then   allow deposits to. Be broken down and loosened before removal, then rinse .

Characteristics:-

• Formulated to remove oil,grease & carbon deposits from air coolers & scavenging system
• Efficient and economical.
• May be used for in-service cleaning.
• Renders surfaces oil-repellent.
• Maintains and stabilizes air cooler efficiency at maximum.
• Saves time, maintenance costs and avoids risks of damage when dismantling.
• Leaves no residue and has no harmful effect on engine.
• Product in water solution is non-flammable, non-explosive and has no flash point.
• Can be used for light carbon removal from machinery parts

                    **Read the Material Safety Data Sheet before using this product**

Product Label

Harmful: may cause lung damage if swallowed. Repeated exposure may cause skin dryness or cracking. Risk of serious damage to eyes. Do not breathe gas / fumes / vapour / spray. in case of contact with eyes, rinse immediately with plenty of water & seek medical advice. If swallowed do not induce vomiting: seek medical advice immediately and show this container or label Wear suitable protective clothing, gloves & eye/ face protection.